How to extract a disk image to your hard drive. How to unpack a file from an archive using programs

Instructions

Download the Alcohol 120% program to extract the file from the disk image. Wait for the program to download and install it on your computer. Set up the program to work with drives.

Launch the program from the main menu or using a shortcut on the desktop. Go to the “Tools” menu, select “Settings” from the list, go to the “Virtual disk” tab in the window that opens, set the required number of virtual disks. You can make a maximum of 31 disks, but it is recommended to set the number of disks that you need to mount at the same time.

To extract a file from the image, select the number “1” and go to the “File Associations” tab. Check all formats there except *.rar format. Save the settings by clicking on the “OK” button and wait until the settings take effect.

Proceed to create a virtual disk to begin extracting the file from the image. Go to the main menu of the program, select “File”, the “Open” command, specify the path to the disk image. Next, the image file will be added to the program. Right-click on it, select “Mount to device”, select the virtual drive. Next, go to the “My Computer” window, open the mounted drive, find the file you need and copy it to a folder on your hard drive. Extracting the file from the image is complete.

Mount the image in Deamon Tools to extract the file from the image. To do this, download the program and install it on your computer. Next, right-click on the program shortcut in the tray, select the “Virtual Drive” command, create one drive.

Then right-click the program icon again, select the created drive and click “Mount image”. In the window that appears, select the image file from which you want to extract the file. Click "Open". The image will be mounted. Next, open “My Computer”, select the drive, find the file you need on it and copy it to hard drive.

Sources:

• Extract files from ISO images!

System Restore is a tool provided Windows developers in case of failure operating system. Such a failure may occur as a result of the incorrect operation of some programs or due to the user's fault. System Restore allows you to return the system to full functionality.

Instructions

To do this, right-click on the “My” icon, select “Properties” and go to the “System Restore” tab. Here you can either check the box next to “Disable the recovery system on all disks.” An unchecked box will mean that the recovery system is enabled.

If for some reason you don't find the My Computer icon, go to the Start menu and go to Control Panel. If the list of Control Panel services is displayed in classic view, select the “System” section. If services are displayed by category, select the Performance and Maintenance section and click the System icon. Then go to the System Restore tab.

Video on the topic

Please note

In some versions of the operating system Windows systems The names of sections and menu items may vary slightly.

The Windows operating system has a special System Restore utility. When programs or drivers are installed, it creates restore checkpoints that, in the event of a failure, allow you to return the system to operational state.

Instructions

Open the Start menu and select Control Panel.

In the window that opens, select the “System and its maintenance” section, and click on the “System” item.

In the window that opens, click on the “Recovery” button.

You will see a list of saved restore points with date and description. Select the appropriate one and click “Next”. Then, to confirm the action, click the “Done” button.

The computer will restart and the system will restore.

Video on the topic

Please note

During recovery, no personal files of users are affected, for example, documents, photographs, etc.

System recovery can only be performed by the computer administrator.

Sources:

• how to restore the system on a computer

The Windows operating system includes a System Restore tool. It is designed to return the state of the system up to a certain time. Sometimes the user takes actions that lead to disruption of the system, and this tool helps to return the system to its original state before changes were made.

You will need

• Windows operating system tool "System Restore".

Instructions

“System Restore” is used when important data is accidentally lost or some processes are irreversible; this tool is launched from the “Start” menu. Click the Start menu, select All Programs. In the list that opens, select the “Standard” section, then “System Tools”, click “System Restore”. If prompted, enter your administrator password (don't forget to confirm your password).

If you have some programs or windows open before starting the tool, close them and save all changes, because System Restore will require a restart of the computer. Don't forget that all changes that will be made by this utility can be done (a checkpoint is created before restoring).

After launching the utility, the main window will appear on the screen, in which you need to click the “Next” button. The “Restore your computer to” window will appear in front of you, in which the recovery points will be displayed. You need to select the desired restore point. Which restore point should you choose? Pay attention to their headings: “Center Windows updates", "Installing Quick Time Player", etc.

After selecting the appropriate point, click on its title, then click the “Next” button. By default, not all recovery points are displayed in this window; to view all options, check the box next to “Show other recovery points.”

The next Restore Point Confirmation window will provide details of the operation that will occur after the computer is restarted. If everything is correct, click the “Finish” button, it will happen automatic reboot computer. While the operating system is loading, it will start automatic recovery system until the previously specified date.

“System Restore” will finish in a few minutes and the system will boot. A window will appear on the screen indicating the successful or unsuccessful completion of the recovery operation.

Video on the topic

Please note

System Restore does not work with all file systems FAT category (FAT 16 and FAT 32). “System Restore” can only be run on disks larger than 1 Gb.

System Restore from the last checkpoint, saving becomes necessary mainly in the case when malfunctions are observed software. The restore function itself means returning the state of the parameters and settings of the operating system and other programs at the time the last checkpoint was created, which can be created either automatically or manually.

Instructions

Open the Start menu. Use it to find the list standard programs, it contains the sub-item “Service”. This is where the utility that serves for system recovery purposes is located. You can also create a checkpoint there in this program.

Click the "Next" button. You will be prompted to select a system restore point. If such points have been created more than once before, then the previous state will be available to you in addition to the last saved one. On the left you will see a calendar, and on the right a table explaining the nature of the circumstances under which the restore point was created.

Please note that most of them are often done automatically by the system, for example, when installing certain programs. This is convenient, given that many of them can adversely affect the operation of the entire system, so you can remove unnecessary software and the consequences of its use through one recovery procedure.

Click the "Next" button. You will see a warning window, please read its contents carefully. At this point, you should have saved all the documents you were working on, because when you perform the restore procedure, the system will reboot automatically, preventing you from applying unsaved changes.

Please note that this may remove all programs that you installed in the period of time between the checkpoint and now. Save copies of the necessary data from these programs so that you don’t have problems restoring them later.

After performing a system restore operation and turning on the computer, check whether there are qualitative changes in operation and whether the problem has been resolved. If not, then try choosing a different system restore point; perhaps the changes occurred much earlier and were simply not noticeable until recently.

Video on the topic

Please note

The recovery process is completely reversible.

Useful advice

Perform system checkpointing frequently.

Blocking the System Restore function is the result of an impact malicious applications. To return the system to normal operating condition, it is imperative to perform a complete scan and removal of viruses antivirus program.

Instructions

Call the main system menu by clicking the “Start” button to initiate the procedure for unlocking the system restore function using Group Policy and go to the “Run” dialog. Enter the value gpedit.msc in the “Open” line and confirm the launch of the “Editor” tool group policies" by pressing the OK button.

Expand the "Computer Configuration" link and go to the "Administrative Templates" section. Expand the System node and select System Restore. Select the "Not Specified" checkbox in the "Disable System Restore" group and restart your computer to apply the changes.

Keep the F8 function key pressed during startup if you cannot unlock the System Restore function using the above method. Specify the item " Safe Mode with support command line» in the menu of additional options that appears secure boot operating system using the arrow keys and confirm your selection by pressing the Enter function key.

Enter value - rstrui - for Windows versions 7;- WindowsSystem32
strui.exe - for Windows Vista version; - WindowsSystem32Restore
strui.exe - for Windows version XP in the text field of the command interpreter and confirm forced start System Restore Utility by pressing the Enter function key.

Use the option “Restore your computer to an earlier state” and confirm your choice by clicking the “Next” button. Specify the desired restore point by selecting the date of normal system operation in the calendar, and authorize the application of the changes made by clicking the “Next” button. Confirm the selected action by clicking "Next" in the next dialog box and wait until the process completes.

Wandering around the Internet, you've probably come across curious files that you didn't know how to open or what to actually do with them. These are files that have the ending (extension) ISO. Simply it is an exact copy of a real disk. To start using it, you just need to create this image using a special program.

In this article, we'll look at the easiest way to open or extract content from the most popular disk image format - ISO.

Usually games are saved in this format. A disc or several discs with the game are inserted one by one into the drive, copied and packaged according to the archive principle in ISO format. Now let's take a look the simplest way extracting data from a disk image in ISO format.

To begin with download to your computer the necessary program for work with these file types. Open your Internet browser and enter the website link in the address bar http://www.daemon-tools.cc. After that Select “Downloads” from the menu at the top.

After the page has fully loaded, find a program on it called “DAEMON Tools Lite". Below, after the description of the program, left-click on green button with the inscription “Download”.

After this, a page will automatically open in your Internet browser where you can find a link to download the program itself Daemon Tools Lite. On this page you will see a table on English with the number of downloads, the file name, the date the program was posted on the site, a list of supported operating systems and an MD5 key, with which you can check the integrity of the program file if necessary. After the table on the right you will find a link to download the program with the inscription “Download».

Select the directory where you want to save the installation file and click the "Download" button.

After the download process is completed, open the folder in which you saved the installation file and double-click on it with the left mouse button.

The installation program dialog box will appear in front of you.

Click "Next" button after that click the "Agree" button in order to confirm your agreement with the rules for using this software, select " Free license» provided that you use this program for non-commercial purposes, and again click the "Next" button. After this, a window will appear in front of you with a choice of initial parameters for the Daemon Tools Lite program. If you do not want to install Yandex.Bar and make Yandex the default site in your browser, then uncheck the items “Install Yandex.Bar”, “Make Yandex home page" and "Set Yandex as default search."

It is better to leave the remaining settings as they were suggested by the installation program. Click the "Next" button. Select the program installation path and click "Install" button. After completing the installation process and creating virtual drives for emulating disk images click the "Done" button leaving while checking the “RunDaemonToolsLite" and "Send anonymous usage statistics."

After installation you will have to open the programDaemonTools, a shortcut to which you can find on your desktop. Your computer must have detected a new connected CD-Rom that is virtual in order to run ISO images. It is in this directory that all the information that is stored in the disk image will be displayed after you mount it. After launch, a small icon in the form of a small blue lightning bolt in a white circle will appear in the tray in the lower right corner of the screen.

In order to launch a virtual disk image in ISO format, you must right-click on this icon, hover over the “Virtual drives” item, then hover over the drive that the program created on your system, then select “Mount” image…".

After this, a dialog box will appear in front of you in which you will have to select the ISO file whose contents you want to view. In our example, this is a disk image with the Rules of the Road. Select the file and click the "Open" button.

After the message “Mounting disk...” disappears from the screen. you can view the contents of yourISOimages in that drive in the system, which the program assigned. In our example, this is drive F:\

In order to unmount a disk image, that is, remove the contents from the virtual drive, you must click on the program iconDaemonToolsright click, in the context menu select “Virtual drives”, further move the cursor to that drive, which the program created in the system, and select "Extract". This operation is the same as pressing the eject button on a real laser disc reader.

That's it. Good luck.

By the way, here’s how it’s created in !

Unpack the ISO image into a folder and work as with regular Windows files. Divide the archived file into several parts.

1. In this article we will look at two examples using the Win Rar program. The program is paid, but it’s worth it; I think its analogue can be compared with 7Zip, which can be downloaded for free. To become the first option from this article, you can use 7Zip. You have come across a file extension such as Iso, you read on the Internet that it can be opened with virtual disk drive emulators. And also write such a file to a disc and work from it, launching what was in the ISO image. Programs that emulate cd dvd drives are: Alcohol 120%, Alcohol 75%, DaemonTools for recording to disc. But perhaps this approach to business does not suit you and you wanted to work with a program, for example, which is located in an Iso image as with simple file which can be launched by double-clicking the mouse. Let's print the ISO image into a regular folder, which will contain the files previously found in the ISO image. We installed WinRar and are analyzing the first option with unpacking the ISO image.
2. By right-clicking on an ISO image? You can choose the action: 1.) view the contents of the "ISO" 2.) Unpack the "ISO" image into a folder with the same name as the image itself.
3. 1.) the link option in the context menu takes us to a window for viewing the contents of the "ISO" image. Click the "Extract to" button, we go to the window for editing the path, extracting the image.
4. The ability to write your own extraction path in 1.) the line 2.) Select the folder into which the image files will be extracted 3.) Confirm the actions with the “OK” button.
5. The second option in the context menu is to extract files from an ISO image. In which we do not open additional settings and viewing the image, simply unpack it into the same folder in which the image file itself is located.
6. File extraction process.
7. In any choice in the options menu, we get a folder with files, in the same folder as the image, if you did not change the path yourself as described in the first option. Below is the result after extracting and unzipping the ISO image. The folder that contains the files that were in the image and the ISO image itself.

Divide a file or folder into parts when creating an archive.

8. The created archive in WINRAR can be divided into equal parts, at your choice. These parts can be sent separately by mail if the file size is large and the post office does not send larger files. You can also share important file into two parts and send first one file, and then the second when the transaction is completed. To securely store files, you can put several archives in different places and until they are all in one place in one folder, you or anyone else will not be able to open them, turning, say, without one archive into one file or folder, as was originally the case when several archives were created .
9. Right-click on the desired file or folder and select the “Winrar” “add to archive” operation from the context menu.
10. Next, the “Winrar” window will open to select further operations with our file. We need to select the size of the individual parts of the created archives. We have 5 options to choose from on the General tab, 5MB, 100MB, 700MB, 4095MB, 4481MB, the last option is auto. My file in this example weighs 3.37GB and I will divide it into 700MB parts. If you select the "AUTO" option, then the archiver will automatically create archives with equal weights. I select 700MB from the menu as in the picture below and click the “OK” button.
11. In the example folder, after creating the archive, I see 5 files with the extension "rar" of 700 MB each and the last one 481 MB. Who knows why the latter is different, write in the comment?
12. I gave you two options using WINRAR archiver. The methods I use myself, the first one especially helps. Since many programs are downloaded in an ISO image, launching a virtual disk drive is too expensive; a simple option of unpacking the image into a package is just what you need. Fast, without unnecessary actions, less resources spent computer device, in fact, there is only one saving in everything. If you have a question about other parameters of the WinRar archiver, then I advise you to download the Help file in which you will find full instructions from the manufacturer on the use of the archiver and its functions.

Links mentioned in the article:

13. Russian version of WINRAR x32
14. Russian version of WINRAR x64
15. Help file
16. To the official WINRAR website to download other versions of the program

Hello dear readers. In today's article we will talk about ISO files, or rather, we will look at two ways to unpack them.

An ISO file is most often backup copy original media. We usually encounter files of this format when we download games from the Internet or operating systems.

There are a number of programs that can be used to open ISO files without first unpacking them. For example, using the 7-Zip archiver. With this paragraph I went a little ahead.

Unpacking ISO files

I don’t want to burden you with any complex programs to carry out this process. Therefore, as I mentioned above, to unpack an ISO file it is enough to have one of the archivers: Winrar or 7Zip.

So that you don’t have to surf the official websites of these programs, I will post them for download below:

Download Winrar archiver for free

Download free archiver 7Zip

Have you downloaded and installed? Now you just need to right-click on the ISO file required for unpacking and select “ Open with help yu" → " Winrar/7Zip».

I note that during Winrar installations you must check the ISO box. If you do not do this, you will not be able to open ISO files. Therefore, be careful. Although if you forgot to do this, then you can make a similar setting in the archiver settings.

Then do the usual unzipping process specifying the folders where to extract the files and folders.

As for other programs for working with unpacking ISO files, I would highlight such as IsoBuster, Daemon Tools, MagicISO, Ultra ISO, DeepBurner Free and many others. For home use, I recommend the free version of Daemon Tools called lite.

To extract an ISO file using Daemon Tools lite necessary:

2. The file will appear at the top of the program window. Right-click on it and select the command “ Mount».

3. A shortcut with a virtual drive will appear at the bottom of the window. We also right-click on it and select the command “ Open».

4. An explorer window will open with everything stored in the ISO file. Now you can easily copy any folder or file and extract it to your hard drive using regular copying.

This method is a little longer than if you use archive programs, but it also has a right to exist. That's all, I wish you good luck in extracting your ISO files.

Let's say you downloaded a movie, game or video from the Internet. Everything went well, the download process is completed and you, in anticipation of your upcoming vacation, try to open the file. But it does not open and, in addition, it does not have the usual .exe or video .avi format for games, but instead has an .iso extension, which is not clear how to open it.

So how to open iso files, which are otherwise called virtual disk images?

An .iso file is a digital image of an optical disk (either a copy of a real CD/DVD disk or an artificially created disk image).

Considering all the amount of software that currently exists on the Internet, it is quite difficult to choose a simple, convenient and most suitable program for your goals. A similar situation is observed with programs for launching and opening .iso files. We have selected five programs that, in our opinion, will be most suitable for solving the given problems. Let's look at how to open an iso file using each of these programs.

WinRAR

One of the most simple programs that open iso files is a well-known WinRAR archiver. Almost all versions of the Windows operating system include this program in standard set software. We will not describe all the properties of the archiver; we will consider only the property we need - opening files that are disk images.

Using the program is quite simple: right-click on the .iso file. It will open before you context menu, in which you need to find the "Extract" tab.

The file is automatically opened through WinRAR, which offers a choice of location to extract all content from the disk image. After this, all you have to do is wait until all the information contained in the .iso file is downloaded to the location you specified.

Daemon Tools

Regarding Daemon Tools, we have one - it describes in more detail how to work with this popular program.

Another program that allows you to open and read disk images. It is an emulator that creates virtual drives on a computer, through which virtual disk images with .iso resolution are opened. In other words, the program “tricks” the computer into recognizing the .iso file as a disc found in a CD/DVD drive.

We will not describe all the intricacies of working with Daemon Tools, we will only consider how to open an iso disk image using this utility:

As the name of the program suggests, it is specifically designed to work with files that are disk images. It's quite easy to work with. Let's look at the process of opening and playing an .iso file in several steps:

Alkohol 120%

Quite a popular and well-known program for opening iso images. It can be used to run or play the contents of .iso files. It’s worth noting right away that the program is more difficult to use for inexperienced users and to play files you need to perform an order of magnitude more actions than in previous programs. In addition, the program is paid, and for permanent use you need to buy a licensed version.

Let's look at how to use Alkohol 120% to open disk images:

Power ISO

Power ISO is a small and easy to use emulator program for playing disc images. It is an extended version of the Ultra ISO program, allowing you to play not only .iso files, but also other image files that have permissions .bin, .mdf, .mdl, .md2-5, etc. The principle of operation of the program is exactly the same as that of Ultra ISO, so we will not re-examine the steps required to open the desired file. We simply repeat the same steps and in the same order as in the Ultra ISO program.

Other programs for opening .iso files

In addition to the above programs, you can use others. As a rule, other programs are not so convenient for inexperienced users, or there is no Russian version of the program, or free version applies only for a certain time. However, if you do not have access to the Internet, but the software allows you to select several options for opening .iso files, you can use programs such as ISOBuster, Roxio Easy Media Studio, WinISO or Gilles Vollant WinImage.