How to configure Connectify to distribute Wi-Fi to all devices? Installing the Connectify program.

It was limited by the presence of an ADSL modem or a cable for a network card. Very often, Internet providers used restrictions on the ability to split the “Internet signal” across several computers. Violation was subject to a fine in the form of increased fees. Today, almost every operator allows you to use the Internet connection at your own discretion. ISP offerings include not only network access service, but also devices that provide Internet access to more gadgets. One of best solutions Today, the Connectify program is used to distribute the Internet.

Setting up Connectify for Wi-Fi distribution.

Let's use Connectify in practice and create an access point - Hotspot. Before setting up and installing, it is recommended to visit the page technical support and check if the network cards are compatible and supported by the application. To install the program, download and run it, after which the New Software Installation Wizard will open. Click the “I Accept” button and confirm to restart your PC.

Setting up a Wi-Fi adapter with an access point

How to set up Connectify? Upper part The screen with the “Settings” section contains the most important application parameters:

• Wi-Fi name – the name of the network we are creating. wireless network or, in the case of coverage expansion, the name of the network being expanded;
• Password – password for the wireless network;
• Internet - here you need to install network connection– usually this is a “connection via local network» (cable) or in the case of the Internet via a 3G modem - telephone connection;
• The mode is hidden by default, it allows you to configure the operating mode (access point using WPA2-PSK encryption, Ad-Hoc in open mode or WEP encryption);
• The “Easy Installation Wizard” button allows you to set the necessary parameters in a few minutes. simple steps, which define the network name, password and general connection, and will also help you figure out how to use the Connectify application.

General settings

You can launch the wizard and follow a few simple steps:

• On the first screen, click the “Next” button;
• At the second stage, the wizard will prompt you to enter a wireless network name that will be available to other devices;
• The third step is to set a wireless network password. The password must contain at least 8 characters. Default network encryption is WPA2-PSK;
• At the fourth step of the wizard, you can select a connection. The connection names (loaded from the operating system) are displayed as a drop-down menu. In most cases, you need to select "Local Area Connection";
• The last step of the wizard is to confirm the changes and allow Hotspot to launch.

On the main screen of the application window, the connection status and hotspot will be displayed at the top of the window.

Setting up the connection type

After setting up the application, it is worth remembering that the firewall is initially configured correctly. In case of built-in Windows Firewall Connectify will handle the settings automatically. Other firewalls should be updated with the following network rules:

• Access for Connectifyd.exe, opening ports: UPnP – UDP 1900, TCP 2869, 5000;
• Access for ConnectifyNetServices.exe, opening ports for DHCP – UDP 67, 68, 1317 and for DNS – UDP 53, 1303

Additional information:

• Clients – provides information about clients connected to the created Wi-Fi network, along with IP addresses and their names. Right-clicking on the icon allows you to block or unblock network access, as well as quickly view available network resources, connected client, and so on. Default connection address: 192.168.2.0/24;
• Connection history – a summary of previously connected network clients;
• Start/Stop Hotspot – button for Connect Hotspot.

Right-clicking the Connectify logo or text opens a pop-up menu containing hidden functions (such as setting up a wireless network connection). You can also enable or disable the UPnP server (this option is useful for Xbox users, for example). Clone option Wi-Fi settings allows you to configure Connectify Hotspot and clone wireless network settings, expanding its coverage through a computer running Connectify. The WPS menu allows you to save the network configuration to a flash drive and transfer it to another computer.

Emerging problems and their solutions

To easily distribute IP using Connectify, you need to properly configure the access point. If problems occur, first check for new versions of network card drivers or motherboard on the manufacturers' websites. If Connectify still does not distribute the Internet, check your connection settings. Go to the Control Panel section "Network and Sharing Center" shared access» and check your Internet connection settings. IP, DNS, subnet mask, etc. must be specified. If problems occur, to determine correct settings network connection You should contact your provider.

Looking at how the Connectify app works, it seems that the Internet connection sharing mechanism is almost a clone of ICS (Internet Connection Sharing), known for many years on Windows. In a sense, this is correct. However, ICS configuration can be overwhelming for a novice user. Problems can also arise when connecting computers to a VPN network.

• easy installation and configuration;
• opportunity quick access to the hot spot;
• many use cases;
• low cost - in case of purchasing a Wi-Fi adapter, and in the case of a laptop - free.

• lack of support for popular 3G modems;
• The computer connected to the network must be turned on at all times.

Often sharing Connecting wirelessly to your computer is an easy way to temporarily share your Wi-Fi network with other devices. Connectify makes it easy to distribute the Internet to many network devices. No complicated settings for the operating system. The application has one more advantage - it is free.

Portal website welcomes everyone who decides to set up a laptop as a WiFi access point. How to make wifi on a laptop? In this article, we will use a laptop program that allows you to turn a computer with a Wi-Fi module into a router with a limited range.

Program Connectify(http://www.connectify.me) is paid program for a laptop or computer with a WiFi module, which is designed to distribute incoming Internet to a laptop, for all devices that can receive Wi-Fi signal. How to set up Connectify, and how to use this program? Let's look at the features of the setup!

Introduction

If this is your first time on our website, and you have a vague idea of ​​what you need Connectify, and myself Wi-Fi technology, we advise you to pay attention to the following articles:

1. - another way to make an access point out of a laptop.
2. — if you have a router and a laptop, then the publication should be useful.
3. - detailed instructions.
4. — step-by-step instructions.
5. — instructions and explanations of security settings.
6. - where to start looking for the problem.

For those who decided to download Connectify not from the official website, we advise you to check the downloaded program or the archive with it, the link tells you how to do this. Let's move on to the settings Connectify.

Today, there are a lot of manufacturers and models of laptops: Samsung, HP, ASUS, Sony, Acer, Toshiba, Compaq, DELL, Lenovo, MSI. But if your laptop has a WIFI module installed, then the program should work. Download Connectify, and run the installer, there should be no problems here. After installation, reboot the laptop or computer if the tray icon does not appear immediately:

Click on the program icon and get to the main program settings menu.

Let's take a closer look at the available characteristics:

• WiFi Name— access point name, can be anything.
• Passphrase— the password required to access the Wi-Fi point being created.
• Internet— a drop-down menu in which you need to indicate which Internet connection will be used for distribution.

As you can see in the picture, you can choose the Internet connection that will be available to network participants.

Let's find out how to use Connectify. After setting up the network name, password and Internet connection type, we need to enable the wireless network connection itself. If it doesn't work for you Connectify, perhaps the reason is a disconnected program connection.

So, the network was turned on, the program was configured. Click "Start Hotspot" in the program menu. After clicking, the tray icon will change.

And in the program itself the access point status and encryption type will appear.

Now, if you go to the tab with active connections, you will see the created one Connectify access point.

When connecting devices to our access point, the program will display "Connected Clients".

Also, when you connect any device, the program icon in the Windows tray will change and a person will be added.

As you can see, making a laptop a WiFi access point is easy. This concludes our article. We hope you now understand how to use Connectify, and figured out how to make wifi on a laptop. Go to website, we make our articles for you!

• Install the program on the PC.
• Carrying out the setup Connectify and set a general password for the wireless network.
• We connect clients to our network - telephone and laptop.

1. Download the program and run installation file, there are no settings during the installation process, so we won’t dwell on it.
Unless you have to restart your computer after installing the program.

In the first window that opens after restarting the PC, selectContinue - Try Connectify Lite.

2. Open the program settings by clicking on the wireless network icon in the lower right corner of the screen.

Fill in the fields:

• Hotspot Name- the name of our wireless network.
• Internet to Share- select from the network card through which your PC is connected to the Internet,
• Share Over— here you specify the Wi-Fi adapter to which other devices will connect.
• Sharing Mode- selection of modes Wi-Fi work adapter.
• Allow Local Network Access— enable/disable access from wireless to local network. Works also in the paid version.
• Password- specify the password to connect to the wireless network. ( In the Sharing Mode field - select the mode WEP).
  A) Passwordless mode - Wi-Fi Ad-Hoc, Open
  b)Password mode- Encrypted (WEP)
  (We use this mode to protect the network from accidental connections.).
• Allow Internet Access— enable/disable Internet access. Works in paid version Pro.
• Allow Local Network Access— enable/disable access from wireless to local network. Works also in the paid version.

Now press the button ""Start Hotspot" and the program icon will change to a gray icon, which means the computer is ready to connect.

3. Turn on your laptop or other device WiFi network and wait until the list of available networks appears, from which select your network ( the network name was entered in the Hotspot Name field) then select the “Connection” button.

A window will open to enter your network connection password, enter it ( the password you entered earlier in the Password field)

Now, if the Internet is on your PC and you followed all the instructions, it will appear on other devices connected to the network.

The list of connected devices is available in the tab Clients.

How to set up Connectify?

The Internet has long become an integral part of our lives. Over the years, we can see with our own eyes how wireless technologies are gradually replacing wired and cable technologies.

We will talk about wireless Internet technology Wi-Fi. Today it is difficult to imagine a public place without public Wi-Fi. Many people install Wi-Fi router s for home use, because it is very convenient.

Those who have not yet been lucky enough to own such a router should not despair. After all, most modern devices ( personal computers, laptops, smartphones and tablets) already have the technology built-in. Owners of such devices and still having cable Internet can easily create a Wi-Fi access point at home.

Connectify hotspot

There are a lot of programs that can turn your device into a Wi-Fi router. The most convenient among them is Connectify.

The program was developed in the USA for operating systems Windows 7, 8, XP. It is free for users. Although there is a paid version of this software, which offers a wider range of features.

The utility is very simple and easy to use. Moreover, you can set it up quickly and easily.

So, to create a Wi-Fi point we need a laptop and a few minutes of time.

Installing Connectify software

1. Download the program. It is easy to find on the Internet by name; the supplier’s website is also called. We get the utility using any bootloader.
2. We launch the file in .exe format, accept the terms of the license agreement by clicking on the “I Agree” button - I agree.
3. We follow further and wait for the installation process to complete.
4. Upon completion of the installation, we see two options in the wizard window to choose from: “Reboot now” and “I want to manually reboot later” (I want to reboot manually later). Select the required parameter. Since we still need to go further along the instructions, we select the first option.
5. The program is installed. We are waiting for the laptop to reboot.
6. After the reboot, automatic prompts pop up with the main features of the program, click “Continue” and in the next window “Try Connectify Lite” (try Connectify Lite).

This menu also allows you to buy Pro version or enter license key. If you don't have one, follow the instructions below. The Lite prefix means that you will use a “light” version with a basic set of features, which are free for us.

Setting up a Wi-Fi hotspot via Connectify

The connection name and password can always be changed if there are suspicions that someone is using our connection unauthorized, or you simply want to change these parameters.

1. Let's pay attention to the tray (lower right corner of the screen). An icon for the newly installed program appeared there.
2. Click on the icon and the program window appears.
3. We configure the utility:
   • in the “Wi-Fi name” field we indicate the name of the access point (any combination of letters or numbers or some word). This name will be displayed when searching for available Wi-Fi points on other devices.
   • In the “Password” field, enter the password with which we want to protect our network.
   • “Internet to Share” - in this field we select the provider that provides Internet to the laptop (name of the network card, for example).
4. Let's move on to additional settings(“Advanced settings”):
   • In the “Share Over” field, select “Wi-Fi”.
   • in the “Sharing Mode” field, be sure to select “Wi-Fi Ad-Hoc, Encrypted (WEP)”. In this case, our password will be valid and the access point will be protected from unwanted connections.
   • The “Firewall” field is not available in the simplified version of the program - this is additional protection for our network.

By clicking “Start Hotspot”, we can see that the access point is active (the tray icon has changed). That's it, the point is ready for use by any of our devices.

It is also worth noting that each time you start the program there is no need to enter all the data from step 4 of the instructions again. They are saved and can be edited.

How to create Wi-Fi without a router

In order to create wifi connection without a router, you can use this method:

1. Start - Control Panel - Network and Internet - Network and Sharing Center - Set up a new connection or network.
2. Select the item “Setting up a computer-to-computer wireless network.”
3. Enter the network name, key and set the parameters.
4. Click “Next” and “Finish”.

Now you know how to set up Connectify Hotspot on your PC and distribute Wi-Fi without a router.

Do you want to use the Internet on all the devices you have in your house/apartment, but don’t want to spend money on purchasing a router? There is a solution - you need to configure the router function on the computer to which the Internet cable is connected.

Installing software for Wi-Fi distribution

There are many utilities for distributing the Internet, but we recommend using a proven and simplest utility, which is called Connectify. Download it from the official website by following the link and click on the tab Download.

The site will offer you to buy full version or download free analogue. The free Connectify has all the necessary functions to create a full-fledged Wi-Fi network, so there is no point in spending money on the version for home use. After the download is complete, run the installation file, study the agreement and click the “ Next»(I agree).

There is no Russian version of Connectify on the official website, but you can search for it on the Internet. We wait for the installation to complete and restart the computer - the program itself will prompt us to take this step.

IMPORTANT! You will be able to distribute the Internet only from a device equipped with a Wi-Fi adapter. Usually they are present on all laptops, this applies even to older models. To use the Internet with different devices, we need to configure Connectify Hotspot (access point).

Setting up Connectify Hotspot: step-by-step instructions

After you turn on your computer, the Connectify shortcut will appear. We launch the program and follow the following instructions:

Ready, Wi-Fi network created, now you can connect to it from any device using the specified password.

Useful advice! If after setup you cannot connect to the access point, then you should check the password and network card. Some computers have two of them, so you could make a mistake and specify an adapter without an Internet cable.

You can create an access point without using third party programs. This function is available in latest Windows- from “seven” to “ten”. We chose Connectify because it's easier and faster to work with. If you want to use the standard service, then go to " Network settings" and select the section " Create a new connection".

Connectify setup video

This video explains in detail how to use Connectify. You can compare your result with the example in the video. You can also pause the video and review a specific step of the instructions if you have any questions.

With Connectify you can use social networks, watch videos, but the Internet distributed through the access point significantly loses speed. That is, you will not be able to play online games or video chat normally. To use the Internet without losing speed, we recommend purchasing a regular router designed for 3-4 devices.