What to do if your iPad does not connect to your home Wi-Fi. We check the password and network settings if the iPad does not connect to home WiFi and the Internet does not work. iPad 2 3g does not connect to Wi-Fi

Every iPad model has a built-in Wi-Fi module. This order of things is due to the widespread popularity of wireless networks. In addition, being tightly tied to the provider's cord, the iPad, in essence, ceases to be what it is - a mobile gadget. Therefore, connecting to any of the Wi-Fi networks operating nearby is an urgent need.

Some users have difficulty connecting and complain that their iPad does not respond to the network, without understanding why this is happening. In our short note, we will comment on the reasons for this behavior of the device and give recommendations for resolving this problem.

Watch a video about connection problemsWi-Fi on smartphones fromApple (instructions are also suitable foriPad):

A few words about the reasons

Reasons why iPad won't connect to home Wi-Fi, maybe several. Some of them are serious, others not so much. Some are real, while others are imaginary and are associated with non-compliance with the conditions for connecting to the network.

Connection diagramiPad toWi-Fi in the following picture:

Why won't my iPad connect to Wi-Fi? Here is a sample list of reasons:

• Failure of the iPad Wi-Fi module due to its breakdown.
• The router is not activated or its signal level is weak.
• Outdated or inappropriate software on the router or wireless adapter.
• Failure to comply with the rules for connecting the device to the network.

What to do if the gadget does not connect to Wi-Fi due to the reasons described? A faulty iPad will have to be taken to a repair shop. The router can be checked on the spot. About installation correct version Software can be found online or on Apple's website. You just need to learn the connection rules. They are described in the instructions for the device. You need to read it carefully, and not randomly poke your fingers at the buttons. Let's move on!

Source status monitoring

How to check the router? First of all, find out whether the LEDs on the front panel of the router are lit. Pay special attention to the one with the Internet icon (on different models may look different, so check the instructions).

If the lights do not light up, it means that you forgot to plug the router into the socket or did not connect the provider cable. Do this and try to connect again.

Nothing works? Sit down at your computer, open the router settings page in your browser and check if all connection options are set correctly. These parameters are described in the instructions of your network provider. Before you reconfigure your router, it is best to reset all of its settings. For this purpose, there is a special button on the router case (usually marked “Reset”).

If, after all the steps described above, access to the Internet appears and disappears, try wandering around the house with your iPad. If reception is better in one location than in another, the network signal is not strong enough.

Interference may also be the cause of an unstable connection. You can also experiment with router channels - these are approximately the same as reception ranges. On one range the signal can be heard perfectly, but on another it can be barely noticeable. If many neighbors use the same channel, then switching to a different band often solves the problem.

By the way, if the Internet doesn’t work, isn’t it time to pay tariff plan? It's a joke! We will assume that you are careful.

iPad connection control

iPad not connecting to Wi-Fi is a fairly common error. After setting up the router and finding a point of satisfactory signal reception, the best thing you can do is reconnect to the network again. To do this, open the settings panel on the gadget and perform the following manipulations:

1. Go to the Wi-Fi section.
2. Select the network of our router.
3. Click on the “Forget this network” button.

1. Reboot both devices (router and iPad).
2. We try to connect again, having first filled in the Wi-Fi connection parameters.

If this doesn't help, try resetting the network configuration. Go to the “Settings” of the gadget, then to “General” and click on “Reset network settings”.

In theory, everything should work. If not, then you need to think about another option. It may happen that the iPad software is outdated, which is why the gadget does not connect to Wi-Fi. You need to update it via iTunes.

If this does not help, make sure that your iPad is not an American “gift”. Models released in the USA require additional configuration, since they are not intended to work in domestic networks. To solve the problem, you will have to change the region to United States in the wireless network settings on your router.

I hope the article was useful and helped solve Internet connection problems. If you have any questions, write in the comments or online chat. Let's figure it out together!

Built-in module wireless communication Wi-Fi is now available in almost everyone electronic devices, and almost every house and apartment has a router. And modern gadgets, such as the iPad, generally connect to the network only via Wi-Fi (there are versions with a 3G/4G module). Therefore, no user will put up with the situation when his iPad does not connect to Wi-Fi. In this article we will figure out what could be the reasons for this problem and what you can do yourself to solve it.

Connection

First you need to try to connect to your network, to do this:

• Go to "Settings".
• Find the "Wi-Fi" item.
• Select the desired network(enter password if required).

If everything is done correctly, a check mark will appear next to the name of the access point - that means everything is fine and you can work. A successful connection will also be indicated by the Wi-Fi icon in the upper left corner.

But it happens that your iPad Wi-Fi doesn't see. Then we proceed in this order.

Distance to router

First, check whether the gadget reaches the access point, that is, whether the tablet is close enough to connect to the Internet. Usually, if the network is visible in the settings, but the signal level is only one bar, then the iPad has poor Wi-Fi reception and cannot connect.

Please note that tablets and smartphones have smaller size The antenna on the case picks up a signal worse than, for example, a laptop.

Checking the router

Use another device to test the connection. Just in case, reboot the router (unplug its power cord from the outlet and plug it back in), update the software on the tablet and reboot it too.

The hotspot works, but Wi-Fi doesn't work on your iPad? Let's move on.

Settings on the device

After an unsuccessful attempt to connect, go back to the network selection menu, opposite the name of your access point, press the “i” button, and in the subsequent menu, click on “Forget this network.”

If this does not help and the Internet via Wi-Fi still does not work on the iPad, we will resort to even more radical methods.

Go to settings, find the “Reset” item (here you may need to enter a password) and click “Reset network settings”. This action will not only reset the settings of all networks, but will also delete all passwords for them from the gadget’s memory, so this is a last resort method.

Other reasons

If after all these steps you still cannot connect to the Internet, perhaps the cause of the problem is of a completely different kind.

Mechanical failure

Remember if the tablet has recently fallen or been left in a damp room for a long time. Such conditions could lead to failure of the part of the tablet responsible for the connection, and here you need to contact service center for diagnostics and repairs.

Cases when mobile devices, including Apple have problems connecting to the wireless Internet, appearing in almost every device owner. This kind of problem greatly limits the functionality of the device and confuses a person who is trying to solve this problem on his own. In more than 90% of cases, the owner can find the cause himself and eliminate it, armed with the necessary tips in advance. This article will help you answer the question “Why won’t my iPad connect to Wi-Fi?” In it we will present several situations and tips for returning the iPad to normal operation.

“Unable to connect to the network” is the most common problem among Apple device owners, especially when using open public access points. May be accompanied by endless rotation of the connection indicator or its jerking.

To resolve the error, follow these steps: step-by-step actions, starting with the simplest:

• Checking the signal level.

As we move around the house or on the street, we change the distance between the iPad and the router, moving away or approaching it. The strength of the signal reaching the device depends on the distance and obstacles (walls). When its level is low, packet loss and delay occur, which can lead to involuntary disconnection or inability to connect to the hotspot.

Solution: At home, you can move the router to another place where the walls of the house minimally block the signal (closer to the center of the home). In public places, knowing the location of the point, it is enough to sit closer to it.

• “Forgetting” the network.

The word “forget” means removing the problematic access point from the list of available ones in order to add it again. This will update the connection settings and you can re-enter the password.

To do this, you need to tap on the name of the network in the list and click “Forget this network”, after which we look for it again and enter the password.

• Reboot the iPad and router.

If the iPad still does not connect to WiFi, then you need to restart it. To do this, press and hold the “Home” and “Power” buttons for 3-5 seconds. If possible, reboot your router (aka router) by turning the power to it off and on again. After a minute or two, you can try to establish a connection.

• Resetting the settings.

Resetting all settings resets the hotspot parameters and clears the list of networks. This should only be done if absolutely necessary, as you will have to re-enter the passwords for each of them.

Go to menu "Basic/Reset" and tap "Reset network settings"

Important: Before resetting, try connecting to someone else's router. If the problem remains, feel free to proceed to reset.

• Reconfiguring the router.

If your iPad doesn't connect to your home WiFi, you'll have to reconfigure your router yourself. If you are still afraid or unsure of your actions, invite a specialist from your provider.

This instruction Applies to all modern routers, but the notation may differ slightly. Follow these steps:

"Invalid password" error

The situation when the iPad writes an error about the wrong password sometimes occurs more often than the previous one. The point, most likely, is not a malfunction of the device, but rather the inattention of the owner or an error in the access code.

Often public WiFi (hotspots) are not password protected and are freely accessible. Private networks, on the contrary, are encrypted from outsiders with a complex code of 8 or more characters, including lowercase and uppercase letters of the Latin alphabet, numbers, and symbols. Even knowing it by heart, a person can make a mistake when entering it. The solution to the problem is to check that the password is entered correctly.

Advice: Take your time when typing and make sure you press the pop-up keyboard accurately. If you are given a password orally, first write it down on a piece of paper and then enter it. In case you have forgotten the code home internet(and have not changed it before) – on the back of the router case there is a sticker with information about the device and the necessary key ‒WLANKEY.

Error "No Internet connection"

This error occurs when the device has connected to an access point, but you still cannot access the Internet - browser pages do not load, and online services cannot synchronize with the server. If there is a problem, the device writes “No Internet connection” in the settings of this hotspot.

Most likely the reason is in the router. To check this for sure, you need to connect any other wireless mobile device to the network and make sure there is no Internet connection. If so, then the router is not configured correctly. If your iPad connects to WiFi, but only yours does not connect to the Internet, reset the network from the first point of this article.

Unsecure Network Message

Public points are usually not password protected for public access to them. The downside is the possibility of interception of confidential data by attackers while using the Internet. This is fraught with loss of control over pages on social networks, mailboxes, and even stealing money from your bank accounts.

The message does not inform about the problem, but only warns that the WiFi point is not protected from hacking and should not be used. financial transactions or transfer important information.

iPad doesn't see wireless networks

This problem occurs quite often and becomes sudden. an unpleasant surprise for the owner. The iPad may not see WiFi connections even in close proximity to the router. To check, connect another smartphone or tablet to the network - if everything is fine, then the problem is either in the iPad or in its compatibility with the router.

The problem may lie in software or hardware. mobile device. It applies to all iOS devices of any version. Oddly enough, the latest new products from Apple suffer from it more often.

Here's what you need to do first:

1. Remove the case from your iPad. It can act as a screen that blocks radio waves from the router to the device's transceiver. Check functionality with and without it.

Advice: covers and bumpers often contain decorative painted inserts made of thin sheet metal resembling foil. To avoid carrying your iPad without protection, peel off or remove them from the case if possible. This way you will “kill two birds with one stone”.

1. Reboot your device and router.
2. Reset your network settings.
3. Reconfigure the router (all this is described in paragraph 1 of the article).

If the network does not appear, the problem is in the device hardware. This can only be resolved by an experienced technician or an Apple service center.

In conclusion

In this article, we have presented the most common faults and problems with the iPad of all versions of iOS and shown possible ways eliminating them yourself. The article does not indicate other rarer cases, such as the absence of a WiFi switch, since in 99% of cases they indicate a glitch in the operating system, damage to electronic circuits or the internal antenna.

As you can see, WiFi setup on an iPad - it's not difficult, just follow the instructions and you'll succeed.

Almost all iPad models are equipped with a Wi-Fi wireless connection system. This allows you to connect to any network source, be it a home router or any “hot spot” in cafes, restaurants, subways, offices, etc. Connecting to Wi-Fi is easy:

• Go to Settings
• Find the “Wi-Fi” item
• Select the required network and enter the password (if the access point is located in a public place, then it is unlikely to be protected by a password; the password for your home router was most likely given to you when installing the device)

If everything is in order, then you can log in to the network. To see if Wi-Fi is working, look at the top corner. There you will see a Wi-Fi icon. Now you can use the browser.
However, many iPad users encountered such a problem when the device did not want to connect to the wireless Wi-Fi networks. In the absence of a 3G connection, the inability to access the Internet causes a lot of inconvenience and makes using the device extremely incomplete.

What should you do if your iPad can't connect to Wi-Fi?

First, make sure your device is within Wi-Fi range. Experiment with the location of your device to improve signal reception. Also check if your Wi-Fi router is working and if there is an Internet connection on other devices (for example, a PC or laptop). Just in case, reboot your router by simply unplugging the outlet. Also check your router software and update it if necessary. There are times when the software on your iPad is outdated, which is also the reason why it does not connect to the wireless network. Therefore, if you have an iPad 2 or iPad Mini with the old one iOS version, update them.

If everything is fine with network sources, then try switching to “Airplane Mode” on your device, and then switching back to normal mode. If this trick doesn't work, reboot your device.

Didn't work out? Then we move on to more radical means. To begin, click the "i" icon next to your network, and then click "Forget this network." If this method also fails, we use extreme methods - in the device settings, select “Reset”, enter the password, if necessary, and select “Reset network settings”.

This option will not only reset all Internet-related settings, but will also delete all saved passwords. That's why this method should be used only in extreme cases.

But another radical method is data recovery from backup copy. Of course, to do this, you need to carefully save your device data in iTunes. Connect your device to your computer and manually update your iPad's software. It is worth noting that in this case, absolutely all data will be erased, and your device will be as if it had just come out of the box.

It also happens that the reason does not lie in the software part, and the tablet does not connect to the network due to a mechanical failure. Think about whether you've dropped your iPad recently or if it's been lying around for a long time in a damp room. A mechanical shock or moisture getting inside the tablet could lead to a breakdown of the cable connecting the iPad's processor part to the modem board. In this case, the only way out is to have it repaired at specialized service centers.

If your iPad was brought from the USA, then the problem is most likely in the settings of your router, which limits the number of free channels.

The fact is that in Europe, 12 or 13 channels are used to work with a wireless connection, and in the USA - only 11. Thus, if your router distributes on channel 12 or 13, then your iPad simply will not see the network. You can solve this problem as follows:

1. Go to the router settings. To do this, enter the router address in the address bar. It is unique for each manufacturer. For example, 192.168.1.1 or 192.168.10.1. You can find out the exact address from the instructions for use, which always comes with the device. For example, we will take the D-Link router.
2. Once in the admin panel, go to “Advanced settings”, then to the “Wi-Fi” subsection and from there go to “Basic settings”.
3. Next, change the country from Russian Federation (or Russia, depending on the device) to United States (USA). Save the settings by clicking “Change”. These settings may look different on your router, but the basic principle is the same everywhere. After this, your device should connect to the network without any problems.

There is an operating system on the iPad iOS system Apple company. However, the reasons for refusal tablet computer Seeing the network via Wi-Fi is universal. Experts advise immediately downloading the scanner and checking the load on local channels.

Login Process

1. We visit Settings.
2. Click Wi-Fi.
3. Click on the desired access point.
4. Enter the key (if required).

Lack of success? Click the Info button to the right, select Forget this network. Instantly destroys the password. Enter the numbers again, and check that the point name is correct at the same time.

Protocol Compatibility

The Wi-Fi standard is constantly being updated. Try to cover as many options as possible when setting up your router. For example, b/g/n mixed (see screenshot).

Security Settings

The iPad does not connect to a home router that uses the 5 GHz band. Installation helps:

1. Network authentication WPA/WPA2 mixed.
2. WPA encryption

Resetting network settings

According to reports from forum users, resetting passwords rarely helps.

• Settings.
• Basic.
• Reset.
• Reset network settings.

The user destroys all passwords and other connection information.

Checking date, time zone

Check the date and time on your iPad:

1. Settings.
2. Basic.
3. Date and time.
4. Select the one you need.

Important. Avoid playing with the settings; some devices are blocked by careless user actions.

Service work

Sometimes to Wifi problem applies little: the device does not load individual company services. Visit the official website page, see the latest news:

• com/ru/support/systemstatus

Changing the DNS address

Internet does not work - change DNS:

1. Settings.
2. Wi-Fi.
3. Enter, for example, Google service - 8.8.8.8.

Update

In the context of updating, we offer two options. There is a third one, which concerns backing up the device on iTunes and reinstalling the operating system, but leave such drastic measures for last.

BY

Compound

1. Find the current one among the access points.
2. Click
3. Scroll down.
4. Click Update.

Forget network

Above (see previous paragraph) there is a password reset (Forget network). Try pressing.

Turn Wi-Fi on/off

1. Settings.
2. Safety.
3. Local services.
4. System settings.
5. Turn off the Wi-Fi toggle switch

Router

Outdated versions are unstable. Visiting dangerous sites, including online gaming portals, poses the risk of your equipment freezing. Appearance the body will tell the observer little. The suspended router regularly blinks with the necessary lights.

Encryption type

1. Open Wi-Fi Security Settings.
2. Set the Authentication Type to WPA/WPA
3. Set encryption

1. Take a USB cable.
2. Connect your personal computer.
3. Check Internet availability.

Re-setup is rarely required; simply reboot the equipment by unplugging the power adapter. The process takes 5-30 seconds. The new router will connect to the Internet faster.

Region selection

Wi-Fi channels vary slightly and may overlap with neighbors. The iPad is a foreign device, try changing the wireless network region. The location of the setting is determined by the brand of the router.

Note. Many routers do not support territorial standards. However, it's worth a try.

If the router interface allows, at a frequency of 2.4 GHz, set the channel width to 20 MHz. Apple experts note the presence of strong interference. The second band (5 GHz) is indifferent.

Change channel

Set a different channel using the admin panel. Try setting the width to 20 MHz.

WPS

Press the WPS button (usually marked with two arrows circulating in a circular path). Sometimes best option, if your iPad stops connecting.

WMM Energy Saving Mode

1. Open Additional settings Wi-Fi.
2. Uncheck WMM power saving mode.

Updating router software

Download the latest version of the firmware file and update the router software.

Buy new

If mini 2 does not see wireless network– it’s time to buy a new router, dual-band. By the way, the latest models of devices function perfectly. The peak of user complaints passed in 2012. Parallel to market demand... The 5 GHz band is much better received. Find suitable model router.

Operating system update

Users who managed to update to versions 8.0; 10.3.1, we discovered an unpleasant defect: every 10-30 minutes the network disappears. Requires manual reconnection. Pre-update with a couple of simple steps:

1. Launch iTunes from your PC.
2. Visit the Devices section, select a tablet.
3. Download iOS 9.3.
4. Update your software.

Remove the "helper"

Some versions of the operating system (10.3.1) impose help. Software checks internet speed. If the bitrate drops, the mobile provider's network is automatically loaded. The process often fails, causing user irritation:

• Settings.
• Cellular network.
• Disable Wi-Fi Assistant.

Antivirus

Hackers are too smart (to be caught), but some users are grateful for the results of the check. Try it.

The SSIDs of the networks matched

Outdated routers provide the same SSID by default. Make the network name unique to avoid confusion. Otherwise operating system will refuse to register the access point. Actually, the encrypted password is included in wireless traffic packets. Beware of placing a neighbor's security key! It would be funny if not for the hundreds of sufferers desperate to gain access. The system returns the message: incorrect password. We emphasize that the latter is speculation; there are no open discussions of the problem.

The logical solution seems to be to receive a stronger signal. The absence remains a mystery practical implementation. Let's say that the developers of the standard deliberately decided to draw attention to the problem immediately. So that later someone using the network from the next room can continue to work without any worries.