Connecting a desktop computer to a router. How to connect and configure a Wi-Fi router? Step-by-step instructions for all models

Read the instructions on how to properly connect the router to your computer. General and simple instructions for connecting via cable and Wi-FI.

To ensure a stable Internet connection, you need to order cable installation from a common panel from a reliable provider. Most often, telecom operators offer you to install equipment at home that provides access to digital TV and connect several PCs. Such equipment is a router. It can be simple or equipped with a Wi-Fi distribution system. Let's figure out how to connect the router to the computer in both cases.

How to connect a computer to a router via an Ethernet cable

Owners of desktop PCs are interested in how to connect to a computer via an Ethernet cable. To do this, you need to unpack the device, place it near the power source and select the cable. There should be identical square latches at each end, as well as contact pads on one of their sides. Latches allow you to securely secure the cable in the socket.

1. On your router, insert the cable into the port labeled “Home Network” or LAN.
2. Route the cable to your desktop PC and insert it into the socket located on the back. It is located on the network card or motherboard. The entrance differs from others in its characteristic appearance– it looks like a square hole to us.
3. If the router is not yet connected to the modem, insert the second cable coming from the port into a socket located separately from all others. It is usually located a little away from the rest, and may stand out in a different color.

You should hear a soft click as you insert the cables, indicating that the cable is securely seated in the hole. Some PC models have an indication light that lights up next to the network input after the cable is connected. If it works, then there are no problems with the router or cable, the system is working.

If you need to connect 2 computers to the router, then you need to follow the same rules - insert one cable into the LAN 1 port, the second into LAN 2. These can not only be stationary devices, you can use a wire to make them part of home network laptop. When the connection is made, all you have to do is check the network operation on each device and adjust its settings, which we will discuss below.

Features of creating a wireless connection

It is impossible to connect a Wi-Fi router to a computer (unless it is a laptop) without one device - a USB adapter. You can buy it at any PC accessory store. For a desktop computer to become part of wireless network you need to do the following:

1. Insert the USB adapter for Wi-Fi reception and install software from the disk that came with it. Before installation, carefully read the instructions, it says what settings you need to set for the device to work.
2. Enable Wi-Fi distribution on your router.
3. Activate Wi-Fi reception on your PC.

If the equipment works correctly, your wireless network will appear in the list of available ones on the computer. All you have to do is enter your password and get started. In most cases, there is no need to configure a wireless connection. Sometimes you just need to reboot the router and also set the connection properties to use TCP/Ipv4. You rarely have to enter an IP address manually; it can be obtained from documents from your ISP or from your telecom provider's operator.

You can find out the network name and password from the documents received from your telecom operator. If you received a set of equipment from your provider, then there may be a sticker with this data on the bottom of the router. Now you know how to connect a Wi-Fi router to a computer; establishing a connection with any other devices will also not take you much time - it is carried out in the same way. On smartphones and tablets, you just need to find the network and enter its password.

Checking and setting up the router

In most cases, it is not enough to connect the router with a wire to the computer; you also need to configure it. First of all, look at the connection icon next to the clock on the “Desktop” of your PC. If Internet access is working and your computer is connected to the network, you will see an icon representing a cable and a PC monitor. There will be no additional symbols on it - when you hover your mouse over this picture, the word “Connected” will appear.

Automatic configuration is typical for later builds, starting from version 7, but it does not always work. In this case, you may notice a yellow triangle on the icon, and when you hover over it with the mouse, the words “Restricted” or “No Internet access” will appear. You can get rid of the problem by setting up IP and DNS:

1. Go to the “Network and Sharing Center” through the connection icon or “Control Panel”.
2. On the left, find the line “Change adapter settings.”
3. Several types of connections will appear in front of you. Find the connection to the local network that is responsible. Right-click to call context menu and find the “Properties” item in it, usually it is located at the very bottom.
4. In the “Network” tab, check that there is a marker next to the TCP/Ipv4 connection protocol line.
5. Click on the name of the line “Connection protocol via TCP/Ipv4” so that it is highlighted. Click the “Properties” button located below the list of connection tools.
6. Place markers next to automatically obtaining IP and DNS addresses. Confirm your actions with the “Ok” button.

After the above steps, all you have to do is restart your computer. If after this the connection is not restored, then you need to contact hotline provider. First check if there is an indication on the router next to the word Internet.

If you have 2 or more PCs connected via cable, then you need to make one more adjustment to the settings: set the automatic assignment of an IP address. This happens through the router settings. You can access them through any browser - usually to do this you need to enter in the search bar: 192.168.1.1 (some routers may have other subnets configured by default, you can find the address in the instructions for the router). The login and password for accessing the settings are specified in the contract from the provider, on the router itself, or set by default (in this case, you must enter admin in both fields).

Through this personal account you can check the network connection status, change settings and reboot the router. If you do not set up a dynamic IP assignment, then you will have to configure each device and enter its numbers manually. This part of the setup can be difficult, then you should contact your provider’s hotline so that the operator can dictate the necessary numbers to you.

What to do if there is no connection to the router?

If there is a cross on the network connection icon, this means that the computer does not detect . There may be several reasons:

1. The LAN connector on the router does not work. You need to move the cable to another port, usually there are 4-5 of them, so there will be no problems.
2. Network cable problem. It can be broken even inside the plastic winding, so if you have the opportunity, try connecting the PC with a different cord.
3. Drivers need to be checked network card. To do this, go to the “Hardware and Sound” tab through the control panel and find “Device Manager” there. Find the equipment responsible for accessing the Internet and look at the status of its drivers. If next to the name of the network card there is an icon in the form of a yellow triangle with an exclamation mark, then the drivers need to be reinstalled or updated. This can be done using utilities, boot disks, or a PC with a network connection.
4. Through the Network and Sharing Center you need to check the status of the adapter. To do this, go to the tab that allows you to change adapter settings and find the connection there local network. If it is disabled, right-click on the connection icon and launch it. It would also be a good idea to restart this connection if it was active.

If none of the above methods help, then you should contact your provider. Although in most cases, PC users do not face such problems. Modern operating systems automatically configure any connection and work well with both USB modems and connections using an optical cable.

Which router should you choose?

For those who have not decided which router to buy, here are a couple of tips. Owners of desktop computers most often choose the simplest router model, which distributes the Internet only via cable. This convenient device, to which you can connect not only a PC, but also a laptop. Its main disadvantage is that it is not possible to use a tablet or smartphone at home, since they do not have standard cable inputs.

A router with a Wi-Fi module will allow you to connect such devices. It also comes in several types - completely wireless or mixed. The latter is the most convenient - it has several cable inputs, as well as an antenna for distributing a Wi-Fi signal. In most cases, telecom operators offer just such equipment, since in this case they will be able to offer you a more expensive tariff for connecting to the Internet (with higher speed), as well as digital television(with additional channel packages and services).

Where to install the router in the apartment?

The device is placed where there is access to a power supply, since the vast majority of routers cannot operate without electricity. Other factors may also influence where equipment is placed:

• location of the desktop PC (it is better to place the device in the same room);
• location of the incoming cable (the one that enters the apartment from the common panel);
• apartment layout.

Consider the length of the cables. Before final installation Mark the device at the desired point and check whether it is possible to connect the router to the computer if it stands that way. An important factor is coverage area, especially for Wi-Fi models. In this case, it is best to place the equipment in a central point so that you do not experience network problems in any of the rooms.

We can discuss any problems connecting the router to a computer with you in the comments - share your stories and ask questions. Tell your friends about us and read our other materials.

Access to the Internet can be obtained via an Internet cable or Wi-Fi router. In the second case, the connection speed is much higher, and the amount of data transferred is not limited.

A router, also known as a router, works as follows. A cable is brought into the room, which is connected to the router, and then pulled to the computer. The router processes the signal and transmits it to all devices over the air. Most routers are pre-configured at the factory. The user can only connect the device to the PC and use the Internet.

The device memory contains a routing table. It contains paths to all devices. This is how a whole network is formed. Periodically, the router sends messages to each device to see if the signal reaches it. This is how the current state of the routing table is checked and dynamic routing works. To prevent the signal from going to someone else's device, specific addresses are specified. Static routing is more difficult to control if there are many devices connected, but it is more secure.

What you need to connect your router to your computer or laptop

To connect a Wi-Fi router to a computer you need:

• the router itself;
• network cable;
• PC, laptop with network card.

Modern devices are equipped 4 LAN connector. That is, you can connect 4 computers to one device or form a local network. The cable usually comes with the router, and the card is integrated into motherboard.

How to connect a router yourself

Typically, the installation of the device is carried out by employees of the provider company. But beginners can also connect a Wi-Fi router to a computer on their own.

The equipment kit includes a router, cable and instructions. The first step is to connect the Wi-Fi router to your computer. Since the included cable is quite short, you need to install the router close to the computer. If necessary, you need to order a longer cable from the store and crimp it.

First you need to connect the power cable from the outlet to the device. Next, connect the provider cable and the cable from the computer.

The final step is to insert the network cable into the PC socket.

One end of the network cable must be connected to LAN connector(yellow) to the router, and the second to the computer or laptop.

One of the 4 indicators on the device should light up.

The connection should appear on the taskbar of your PC screen.

How to correctly configure a wifi router

Once the connection is established, you can start setting up.

For one PC

If you connect Wi-Fi router to the computer failed, then the toolbar will light up red cross.

The first step is to simply change the cable. If the connection status has changed. for example, on yellow cross, then that’s where the problem lies.

Most often, difficulties arise due to the fact that network card disabled. To fix this error you need to " Toolbars» select the item « Network and Internet" and then " Network connections" “” will be displayed among the icons. Right-click on the shortcut and select “ Turn on».

If there is no such shortcut at all, then on the PC driver not installed. It is best to download the driver from the disk that came with the equipment.

For PC and mobile gadgets

You can also set up a connection on a laptop through the toolbar. An Internet connection icon is displayed in the lower left corner. Click on it and go to the section “ Network and Internet settings" Available devices will appear in the list. You need to find the name of the router on the network, click on the shortcut and press the “ Connect" If the connection is secure, the system will ask for a login and password.

The connection on a smartphone is configured in the same way. In your phone settings you need to select a section WLAN, find the name of the wireless network in the list, and then enter login And password.

How to install a new router instead of an old one

First you need to connect the new router to the PC, as described earlier. If the device has already been configured by the provider, then the Internet will work immediately after connecting the cable. To check, just open the browser and load the site pages. But if you replace an old device with a new one, you most often have to change the settings.

After connecting the network cable, you need to open your browser and type “ 192.168.1.1 " or " 192.168.0.1 » and press Enter. One of these IPs will open the settings. If none of them worked, then the instructions for the router should indicate the correct IP.

If everything is done correctly, a settings entry window will appear in the browser window. The system will ask for a login and password. When connecting for the first time, you should specify “ Admin" Instead of password a combination may be used 1234 . Also, the login and password for the system can be specified in the instructions for the router.

If none of the suggested options worked, you couldn’t open the settings, then your connection needs additional settings. Only the provider company can understand this issue. Exact settings vary by device model and service provider. There is no universal instruction for such cases.

The settings menu contains several items. The fields should be filled out according to the instructions for your device. It is very important to come up with a strong password. Its length must exceed 7 characters. A strong password consists of Latin letters And numbers.

Passwords and limited access when sharing the Internet

The router itself does not provide access to the World Wide Web. It must be pre-configured and connected to the provider's network. At this point, the problem may arise due to limited access.

If the network cable is connected, but the adapter does not work, there may be several reasons:

• the router is not configured correctly;
• drivers have failed;
• The wireless network is not configured.

Another reason may be enabling economy mode on laptops with low battery power.

In the first case, you need to reconfigure the router according to the instructions. And in the second - reinstall the drivers.

If problems occur on the network, you should check the IP address settings. On the Toolbar in the Network Control Center, select the wireless connection item and open “ Properties».

In the next menu you need to select “ Internet Protocol Version 4 (TCP/IPv4)».

In the line " IP address» must be entered manually subnet address, which is indicated on the sticker at the bottom of the case.

Now let's look at how to remove limited access on Windows 8 PC. To solve the problem, you need to reboot the network adapter.

To do this, in the "" command you need to enter the line ncpa.cpl.

A list of available connections will appear on the screen. We find the one we need and open the context menu RMB. In the drop-down menu, select the item “ Disable", wait until the adapter changes color to gray, and then connect the device again.

Another reason for an incorrect connection may be an incorrectly entered network login and password. To resolve this problem, you should contact your provider.

Content

The Internet has become an integral part of life, and every computer should have access to the network. At home, a connection via a Wi-Fi router is suitable for this, which provides the ability to use both a wireless connection (for laptops, mobile phones, tablets) and a cable connection (for desktop computers).

Where is the best place to install a Wi-Fi router?

For those who are considering options for how to install a router, you should start by choosing a location to place the device. This is influenced by several factors:

• location of the provider's modem or cables, if used;
• apartment layout;
• location of the desktop computer (if any).

There are different models of wireless devices from Asus, TP Link, D-Link, etc. They may have at different speeds data transmission, coverage area. This should be taken into account when you choose a location for the device, so that access is available anywhere in your apartment. In this case the best solution there will be a central point if the cable, the location of the modem and the desktop PC allow it. If you have to install the device closer to the computer in order to run a cable to it, then you need to focus on this factor.

How to connect a router to a computer or laptop

It’s easy to figure out how to connect a Wi-Fi router to a computer. The process itself is quick, but problems may arise with setting up the device. Separately below, we will consider the option of connecting a desktop PC via a wireless network and using a network cable. The option of how to connect a router to a laptop is practically no different. Before purchasing a receiver, please be aware that there are models on the market that do not support Wi-Fi distribution and act as an adapter (for connecting several devices).

At the first stage, to gain access to the Internet, you need to correctly connect the wires to the device. There are several major router manufacturers, but the connection diagram always remains the same. Here are step-by-step instructions on how to connect to a computer wifi router:

1. Unpack and install the device, plug it into a power outlet. On the back panel, as a rule, there is a button to turn on the device: press it. If a signal is received, the lights on the router will light up.
2. There are several sockets on the rear panel. One of them is always located on the edge and is painted in a different color (blue, yellow) with the signature WAN. Connect the wire from the modem or the Internet cable into it. You should hear the latch click, indicating that the cord is securely secured.
3. If you need to connect a cable to the PC, then insert it into any of the empty sockets nearby and stretch it to the connector on the network card. When connected, the light should light up, which means there is a signal.
4. When connecting wirelessly, you need to go to the network settings on the PC itself.

Wireless router connection

Most users are interested in the option of how to connect to a router wirelessly. In the case of a laptop, everything is much simpler, because it has a built-in module for receiving WiFi signal. When it comes to regular PCs, the situation is somewhat more complicated, because you will additionally need to purchase an adapter for a Wi-Fi network. They are easy to find in any hardware store and are often sold together with modems.

There are two options on the market Wi-Fi adapter ov for PC – external and internal. The first ones are connected via a USB cable and stand on the table; they look like a docking station for an Apple player. The latter are mounted on the motherboard via a PCI connector. They work equally well, but the external version can be disconnected and connected to another device, and the built-in one does not take up space on the table. A disk with drivers and software should come with the device.

After connecting to the computer, setup occurs in exactly the same way as on a laptop. In most cases, to enable computer Wi-Fi, you just need to find your connection in the list of networks and enter the password. If you are connecting for the first time, you may need to specify the settings that were given to you when concluding a contract with the provider.

Wired connection using twisted pair

Previously, there was only one way to connect a wifi router to a desktop computer - a cord. At first, a cable from a telephone line was used (sometimes still used), then others appeared that provided not only the computer with Internet access, but also the TV with cable channels. This connection method is still used today, as a rule, for stationary PCs. How to connect a computer to a router via cable:

• connect the provider’s wire to the wi-fi router into the socket labeled WAN or Internet;
• The power cord should be inserted into one of the LAN connectors;
• the second end of the cord must be connected to the Ethernet port of the computer, after connection the light should light up (blink).

What to do if the router does not connect to the Internet

Even if you know how to connect a wifi router to a computer and have done all the necessary manipulations, a situation may arise that a connection to the Internet is not established. At the same time, everything works correctly through the cable, and the wireless network does not transmit data, but is visible in the list of connections. If you call the provider’s support service, the first thing the specialist will do is suggest disconnecting from wifi sockets device, wait 3-10 minutes and turn it on again. In many cases this really helps.

If this method does not help, then there is a high probability that the computer cannot automatically obtain the IP or DNS address of the network. To check the settings, you need to right-click on your connection, select “Network Center”, click on the image of the network connection and go to the “Details” tab. If the DNS or IP item is empty, then this is the problem. You need to call support and find out what values ​​need to be entered in the properties. After receiving them:

1. Click on the connections and click on the “Properties” button.
2. Find the item that ends with TCP/Ipv4. Click on it and click "Properties".
3. Activate the “Use the following IP address” items, enter the data provided to you by your provider.
4. Repeat the same for DNS gateways.
5. Click "Ok" and close the remaining tabs.

Video instruction: how to connect a router to a computer

Found an error in the text? Select it, press Ctrl + Enter and we will fix everything!

There are a huge number on sale now different Wi-Fi routers from different manufacturers. And that’s good, there’s plenty to choose from. But immediately after purchasing a router, we need to install, connect and configure it. And if the connection process is practically the same depending on the model, then the setup process itself and the page with the router settings can be different even from the same manufacturer.

It is very difficult to give detailed and step-by-step instructions for setting up in one article different models. But I'll try. In this article I will describe in detail and show how to install and configure a Wi-Fi router. Regardless of what manufacturer and model you have. This universal instruction is suitable for both setting up a new router and re-configuring it. You can do everything yourself. And you don’t have to pay specialists for setup.

Login to the router settings. How to log into the web interface?

Each router has its own web interface (site with settings, control panel), which can be accessed through a browser by going to the appropriate address.

Important! To go into the router settings and configure it, your device (PC, laptop, smartphone, tablet) must be connected to the router via cable, or Wi-Fi networks. At the same time, there may be no access to the Internet on the computer. You don't need internet to log into the control panel!

If you have a high-speed connection on your computer (maybe with your provider's name), then after connecting through the router there is no need to start it!

To enter the settings we need find out the address our router and factory username and password for authorization. This information is located on the body of the device itself. It looks something like this:

On a computer, or mobile device which is connected to the router, open the browser (Opera, Chrome, Yandex.Browser, etc.) and go to the address indicated on the case. Or try 192.168.1.1 and 192.168.0.1.

Important! We enter the address in the address bar, and not in the search bar. Many people get confused and instead of a page with settings they end up on a page with the search results of some search engine.

On the login page you need to specify a username and password. The factory settings are indicated on the device body. Most often these are admin and admin. On some models, the default settings are not protected, and immediately after logging into the control panel, you need to set a login and password.

Articles that may be useful to you at this stage:

If the settings page has opened, we can continue. If not, then see the article with solutions to this problem at the link above.

How to set up a Wi-Fi router?

In order to use the Internet through a router, you need at least:

• Set up an Internet connection.
• Set up a Wi-Fi network.

In most cases this is enough. I also recommend changing the password that protects the router’s web interface. There are also settings for IPTV, USB drives, parental controls, etc., but not everyone needs them.

In the control panel of almost every router there is a so-called “Quick Setup Wizard”, also known as “Quick Setup”. On some devices, it opens immediately after logging into the control panel. With its help, you can configure your Wi-Fi router step by step. Internet connection, wireless network, etc. For example, what it looks like at TP-Link:

You can try it, it's very convenient.

Internet setup. The most important step

The main thing is correctly configure the router to connect to the provider. If he cannot connect to the Internet, then all devices will have a “No Internet access” connection. Many users who try to configure everything themselves most often encounter problems at this stage.

Each Internet provider uses a specific type of connection. Dynamic IP (DHCP), Static IP, PPPoE, L2TP, PPTP. This type of connection must be specified in the router control panel, and certain parameters provided by the Internet provider must be specified.

Important! You must know exactly what type of connection your provider has. Also all the necessary data for connection (username, password), if they are necessary. As a rule, this information is specified in the contract that you received when connecting to the Internet.

Some providers bind by MAC address. It would also be desirable to clarify this.

If your provider uses a “Dynamic IP” (DHCP) connection, then the Internet should work immediately after connecting, since this type of connection is set by default on routers.

If the Internet through the router is already working (and you haven't run any connections on the computer), then you can skip this section and go straight to setting up Wi-Fi.

When the connection type is PPPoE, L2TP, PPTP, or Static IP (which is very rare), then you need to set the necessary parameters. Usually, this is the login and password that your provider gave you. In the control panel, the section with these settings is most often called: “WAN”, “Internet”, “Internet”.

For example, what the setting looks like PPPoE connections on ASUS router:

Other examples:

Target: so that the Internet through the router works on all devices. Via cable and Wi-Fi. If this does not happen, then there is no point in continuing the setup.

You can always call the provider and clarify what parameters should be specified and where. They help many people over the phone.

Articles that may be useful to you:

I hope everything worked out for you.

Changing Wi-Fi network settings

I highly recommend changing your Wi-Fi network name and password. It is also advisable to set your region. Everything is simple there. This can be done in the section with wireless network settings. It can be called differently: “Wi-Fi”, “Wireless network”, “Wireless”, “Wireless mode”. If you have a dual-band router, then the settings must be set separately for the network at 2.4 GHz and 5 GHz.

• In the "Network name" (SSID) field you need to enter a new name. In English letters.
• In the "Password" field (wireless network key) create and write down a password. Minimum 8 characters. Security type - WPA2 - Personal.
• Well, there should be a “Region” field there. Change it to yours.
IPTV on ASUS routers.

If something doesn’t work out for you during the setup process, you can always reset the settings to factory defaults and try setting everything up again. Find the “Reset” or “Reset” button on the case, press it and hold for about 10 seconds. The indicators will tell you when the reset occurred.

You can leave questions in the comments. I just have a small request, describe the problem in detail. Write the router model. Otherwise, it’s very difficult to understand and advise something when you don’t understand the question itself. Best wishes!

Today we will talk about how you can connect Wi-Fi to a computer via a network cable. After you have installed an Internet cable and connected a Wi-Fi router to it, you can start creating your own small local network. Surely you have not only a desktop computer (or maybe more than one), but also a tablet, a laptop, a smartphone, and a plasma TV. And all this can be combined into one network with each device connected to the Internet.

This way, your entire family can enjoy the Internet at their own discretion without disturbing each other. Someone will play on the computer online games, someone will watch their favorite films or videos from YouTube on TV, someone will work or communicate via the Internet on a laptop, and someone at this time can communicate via WhatsApp or Viber via mobile phone or smartphone. And all these pleasures can be configured with one access point via a Wi-Fi router.

And in order to create (deploy) such a grid, you must use one of two connection options:

1. Lay a network cable from the router to a desktop computer and TV.
2. Connect a desktop computer via an external or internal Wi-Fi adapter. Moreover, laptops, tablets and smartphones already have this adapter built-in.

In this article we will look at the first connection option.

ConnectionWi— Fito a computer via a network cable

Previously, the Internet could only be connected via telephone line. Now this can be done using a network cable (twisted pair). To do this:

• Connect the provider's wire to the wi-fi router into the socket labeled WAN(or Internet);

• Network cable twisted pair insert into one of the connectors LAN. Which one doesn’t matter;
• Connect the second end of the cord to the computer (or laptop) into the connector RJ 45. If the computer is turned on, the light next to the connector should blink.

The network cable can be connected both when the router is turned on and when the computer is turned on. It's safe.

If the Internet does not connect

Typically a computer with an operating system Windows system 7/8/10 automatically receives an IP address and immediately connects to the Internet. But you may have to make some adjustments yourself.

If there is no connection to the Internet in automatic mode, then perform the following manipulations:

1. Check if your Wi-Fi router is turned on;
2. Check whether the network cable is well connected to the connectors of the router and computer;
3. Check the visibility of the network card in Device Manager. If there is no entry in Device Manager " Network adapters ", this means you need to install or reinstall the network card driver.

1. Turn off the router for 30-40 seconds and turn it on again. This usually helps.

Configuring your computer's network card to connect viaWi— Firouter

If, after the above manipulations, the Internet still does not connect, then you need to manually register the IP address for your network card.

To do this:

• right click on the icon network connection on the taskbar. It is located near the clock), and select " Network Sharing Center».

• If this icon is not on the taskbar, then open Control Panel.

IN Windows 7 The control panel is located in the menu " Start».

Select in view " Small icons", and click on the item " Network and Sharing Center».

Right-click on the network card icon and select “ Properties».

Highlight " Internet Protocol Version 4 (TCP/IPv4)" and click the " Properties».

Set the switch to " Use the following address" and below write the following:

IP address 192.168.1.5 (last digit can be anything from 1 to 255)

Subnet mask 255.255.255.0

Default gateway 192.168.1.1

Preferred DNS server 192.168.1.1

An alternative DNS server is not needed

Check the box next to " Confirm settings on exit».

If a small window pops up with some kind of warning, press the “ Yes».

Now it would be good to restart the computer.