Hello everyone, I want to tell you how to get into the safe mode of Window 7 and what it is all about. Earlier I already told you How to get into safe mode in Windows 8/8.1, I understand that it’s Windows 10, but there are still people, and most of them, who just switched to 7 from XP.

Safe Mode - this is the launch mode Windows systems, designed for troubleshooting that uses a limited set of services and components. Only the basic files and drivers required for Windows startup

Safe Mode Windows 7

Let's look at when and under what circumstances this may be useful to you, since not everyone has encountered this. The most common case when you will definitely use Windows 7 safe mode is to remove a virus on your computer, since this cannot always be done in normal mode, since the virus very often leaves tails in different places on your computer. operating system, and can be launched in different processes, which cannot always be deleted in this state, and since it is in safe mode, it can be launched without loading at all network card, then the virus does not have access to the Internet, and even in a limited mode Windows operation, there is simply no escape from the formidable antivirus, so booting the computer in Windows 7 safe mode is a one hundred percent victory over the infection.

Another very common example when the safe mode of Windows 7 is used in practice is the removal and rollback of a faulty driver for a device, very often this happens with new versions of drivers for a video card or sound, which results in a blue screen when loading Windows 7 and the system does not work generally.

All above we found out the purpose of this mode. And so you are now logged into your Windows 7, press WIN+R and write msconfig.

msconfig is a kind of hidden control panel, additional functions Windows 7 and it is very easy to make from it boot windows 7 in safe mode.

Go to the Boot tab and select Safe Mode, apply you will be asked to reboot, do it. Please note that here you can immediately select additional safe mode parameters:

• Minimum
• Another shell
• Recovery Active Directory

As soon as your system reboots, you will see how the minimum set of drivers will begin loading, this is done so that you are more likely to get into the system and be able to perform recovery work, since your system, for example, may crash during a normal boot, due to a new driver, rollback which will help you return everything to the way it was before it was installed.

after a minute you will be able to boot safely Windows mode 7. In the corners you will see a corresponding entry reminding you where you are.

After you have done everything that was needed and you no longer need Windows 7 safe mode, also in msconfig uncheck the box that loads safe mode when you reboot

Booting Windows 7 in safe mode can also be done differently. Another method is to press the key when you turn on the computer. As a result of such actions, you will be taken to a special menu, additional boot options, in which you can select the boot you need. Please note that there are three safe modes, and each of them serves its own needs.

If you know that network connection you don’t need it, then try to always load the minimum mode

Many of the things we associated Windows with slowly disappear over the years as technology advances and we form new habits to accommodate. For example, I remember the days when you just had to repeatedly press F8 to boot into Safe Mode.

It was such a little secret - something like a life hack that you could teach a friend at the right time over the phone. Those days are long gone, however, even if entering Safe Mode has become more confusing, it is also a hallmark of progress in the Windows boot sequence.

Windows 10 Safe Mode

In Safe Mode, Windows automatically excludes some programs and drivers that are not necessary for Windows to load and function properly. And he takes only what is necessary in minimal quantities. This way, the download process will be fast and safe.

In Windows 10, booting your computer into Safe Mode is slightly different than in previous versions of Windows. Starting with versions 8 and 8.1, Microsoft changed the way everyone used to get into safe mode.

If previously we simply used the F8 keys or the Shift + F8 combination to enter Safe Mode, then in Windows 10 these old methods rarely work. But this does not mean that you do not have another way to enter Safe Mode in Windows 10. In this post, I will show you 4 ways to boot your Windows 10 computer into Safe Mode. Let's take a look.

#1 F8 or F8 + Shift

In this case, the oldest method is not the best. Pressing F8 or F8 + Shift repeatedly during boot can bring back memories of your first Windows 95 or XP. But the truth is that these key combinations will rarely work in Windows 10.

Since Windows 8, Microsoft has been able to significantly reduce boot times and therefore a large percentage modern computers too fast to register these keystrokes. Even if the method is still technically supported by the operating system, the system simply cannot react fast enough.

Of course, you should try this easiest method first. If everything went well, you will be directed to the Advanced Boot Options Menu, where you can select and launch Safe Mode.

Note: You must press the key quickly enough until the boot logo appears. The boot logo will look like a picture, which may be different for each user, depending on the equipment manufacturer.

#2 Special download options

The Custom Boot Options menu was introduced in Windows 8.1 and it provides a wide range of options for users who have problems with their computer. It also gave access to additional boot options, which is what we needed. Below are several ways to access the menu with special boot options:

• One of the most simple ways To boot into a menu with special boot options is a combination of Shift and the reboot button. To do this, press the button Shift and press reset button. This can be done in Start Menu, V login menu And other places, where there is a reboot button.
• Another way is to connect recovery disk. Immediately after connecting the drive, start the system. You will be asked to select a keyboard layout, after which you will be taken to a menu with specific boot options. Creating a recovery disk is very easy. Simply type “recovery drive” into the search field, plug in the flash drive, and follow the onscreen instructions.
• Finally, you can boot into a menu with special boot options, via Settings > Update & Security > Recovery. There, click the "Restart now" button under the Special boot options chapter and your computer will restart.

All three of these methods will take you to the same menu. There select Diagnostics > Additional options> Boot options. Then click the reboot button, after which various download options will appear on the screen. Press F4, F5 or F6 to load one of the available Safe Mode options.

#3 System configuration

The System Configuration menu provides the fastest method, at least when you're already in Windows. Open the search field, enter msconfig.exe and press Enter. Then, in the tab, check the “Safe Mode” box. If you want to enter Safe Mode with advanced options, select the option Another shell, not minimal. Click OK and you will be prompted to reboot the system immediately.

If you need to do something before rebooting, then simply select the “Exit without rebooting” option and you can restart your PC after.

#4 Startup abort

The last method is a little harsh, but necessary in some cases. For example, if you cannot boot into the desktop, then of all the options that I described above, only one is guaranteed to work on Windows 10 - the recovery disk. Pressing F8 or F8 + Shift simply won't work on most modern computers, and unless you have a recovery disk, there seems to be no way to get into Safe Mode.

If this is your situation, then I want to reassure you that you can still get into safe mode. Do you remember when your computer repeatedly crashed and then displayed a message notifying you that Windows did not shut down properly or startup was aborted (like the screenshot below)?

You can do the same with your computer. Simply start your computer and abort the startup before or when the Windows logo appears. Do this three times and then allow your PC to start normally. Instead of booting to the desktop, your PC will ask you how to start the system, and Safe Mode will be among the available options.

What is safe mode in Windows 10 and how to get into it if the operating system does not boot? If you have problems booting Windows 10 (or 8.x), you can't use the usual "lifeline" that Windows 7 provides - using the F8 key during computer startup to access additional boot options. In particular, in this way in the seventh version you can get into safe mode and try to solve the problem that has arisen regular means. For example, if the solution to the problem may be to remove the driver or change the system settings. The Shift+F8 keys, which in theory can be used when loading Windows 10 to get into the system recovery environment (and this is an analogue of the Seven boot options), are not so easy to use in practice. You will need to practice several times to catch that very moment of reduced system loading when the Shift+F8 keys can work.

Why is it needed?

Safe Computer Mode is a specific Windows state designed to resolve various problems.

In this case, only the most necessary devices and components to maintain the functionality of the OS are used. Safe mode means that you can work with administrator rights; it also allows you to delete files that the system or third-party software will not allow removal under normal conditions.

OS safe mode – environment used for uninstallation incorrectly installed drivers and undoing unsuccessfully applied system settings. For example, if you set a screen resolution that is not supported by the monitor, it will not always be possible to change it to one supported by the latter within a fully functioning system. So, there may simply be no image on the screen, and if there is no other monitor at hand that can display the image with the applied resolution, there is no other way to solve the problem than using safe mode. Instead of a video driver, the monitor uses the VGA standard, which is supported by all video cards designed for Windows devices.

Safe mode is one of the solutions to the problem of viruses penetrating the OS and blocking work antivirus programs. If no part is damaged by malware system registry, which is responsible for loading safe mode, you can try to launch an anti-virus scanner, delete the startup file and/or virus process in the task manager, and also apply other actions to resuscitate the system.

Running system configuration section

Using the configuration section of a running system, you can get into the safe mode of Windows 10 by making some settings and rebooting. Right-click on the “Start” button and select the “Run” function.

In the field for entering commands we write:

Msconfig

After pressing Enter we will see the system configuration window. We are interested in the “Download” tab, here we check the “Safe Mode” checkbox.

By default, the system configuration provides a minimum type of safe mode, when startup programs do not start, there is no sound, the network is disabled, only basic video device drivers work, hard drive, mouse, keyboard and other devices necessary to maintain a minimum performance of the operating system.

You can install other types of Safe Mode in Windows 10. By selecting “Other shell”, safe mode will be without the usual graphical interface, but only with the command line. This may be relevant if explorer.exe fails – system service, which ensures the operation of the OS explorer.

The item “Restore Active Directory” provides for loading safe mode from graphical interface and a minimum number of active services, including the Active Directory directory service. If you need to access network resources, then in this case you need to select the “Network” item. It provides, accordingly, for the operation of the network card driver.

Having made your choice, click “Apply” at the bottom of the window and then “OK”.

After re Windows boot will start in safe mode.

The process for setting up Windows 10 to boot normally is reverse. In the system configuration section, the “Safe Mode” checkbox must be unchecked.

Shift key and reboot button for a running system

Another way to get into safe mode if Windows is in in working condition- This is to use a single press of the Shift key and the reboot button. Open the Start menu, click on the shutdown button and, while holding down the Shift key on the keyboard, select the option to restart the computer.

So we get to Wednesday Windows recovery 10. Here we first need the diagnostics section, then the additional parameters section.

All sorts of boot options will appear before us - by pressing the F4, F5 or F6 keys, you can get into the safe mode of the corresponding type.

Safe mode for a non-bootable system

If Windows does not start at all or, for example, a resolution that the monitor does not support is mistakenly applied, displaying a message about this on a dull black screen background, you can boot into safe mode and try to find a solution to the problem, as in the previous case, using the system recovery environment .

As mentioned above, pressing Shift+F8 while Windows is loading may not always work, so a more reliable way to get into the recovery environment would be to boot from the installation disk or from one previously created by standard system tools.

When booting from the latter, we find ourselves in the recovery environment immediately after selecting the language. If the computer is booted from the installation disk, click “Next” in the welcome window.

The next steps are “Diagnostics” and “Advanced options”.

In the command line window we write:

bcdedit /set (globalsettings) advancedoptions true

and press Enter.

The operation was completed successfully, close the command line and click continue in the action selection menu using Windows 10.

After which we will see a list of download options.

If in safe mode you can eliminate the reason that prevents booting, and you can avoid reinstalling the system, in the future the computer will always boot with a menu of boot options. It is very easy to fix this using the same command line, which we now open by selecting from the contents context menu on the Start button.

Enter the command:

bcdedit /deletevalue (globalsettings) advancedoptions

and press Enter.

That's it - now the computer will boot as usual, without any pre-boot states or menus.

Have a great day!

Safe Mode (English – Safe Mode)– diagnostic mode, in which all unnecessary drivers are disabled and Windows functions. Used to troubleshoot problems that arise in PC operation. You just need to start safe mode and fix the errors, after which the PC will work as it should again.

In what cases might you need to enter safe mode? For example, to solve the problem when .

Also, in this way you can remove viruses, reset your password, fix errors (incl. blue screen death), restore the system, etc.

There are several ways. Plus, they differ somewhat depending on what operating system you have. Therefore, below we will look at everything available methods How to enter Windows safe mode.

There are 2 universal methods that work for everyone Windows versions– XP, 7, 8 and 10. Moreover, they are the simplest. Perhaps we'll start with them.

Login via msconfig utility

The first way is through a special utility. To do this you need to follow simple instructions:

1. Press Win + R (the button between “Ctrl” and “Alt”) and enter the word “msconfig”.
2. In the new window, select the “Boot” tab, indicate the desired OS and check the “Safe Mode” checkbox. There are a couple of sub-items here - it is recommended to choose either “minimal” (standard option) or “network” (in this case there will be access to the Internet).
3. Click “OK” and restart your PC - now it will turn on in safe mode.

When you fix the errors, do not forget to return the computer to normal startup mode! This is done in exactly the same way - using the msconfig utility (only now you need to uncheck the box).

There is a small nuance here: in this way you can enable safe mode in Windows OS only if your OS boots normally. If you can’t even load the desktop, then use the second method.

Login using F8

This method is suitable for those whose PC or laptop does not turn on (the desktop does not load, the monitor goes dark, etc.). In this case, do the following:

1. Turn on your PC (or laptop) and immediately press the F8 key repeatedly until a menu appears (in some cases you need to press Shift + F8).
2. If the Windows logo appears or the screen goes dark, you failed. Wait until the system boots completely, then restart your PC and try again.
3. When you do everything correctly, a menu will open where you use the arrows to select “Safe Mode” (the best option).

P.S. This method does not work on Windows 10! This function disabled by developers.

Special download options for Windows 10

If Windows starts, then you need to do the following:

What to do if Windows 10 does not start? If the PC boots before the login screen, then “Special boot options” can be opened in another way. To do this, click on the power button icon (in the lower right corner), hold down Shift and select “Restart”.

We use a disk or flash drive

This is the most reliable way to boot Windows 10 in Safe Mode. But in this case, you need a DVD or (they can be recorded on any PC or laptop).

Connect a USB drive or insert a disk, load them (), and then do the following:

1. After loading, press Shift + F10.
2. After opening the command line, enter – bcdedit /set (default) safeboot minimal.
3. Then close it and restart your PC. It will turn on.

To return the PC to normal startup, write in command line the following: bcdedit /deletevalue (default) safeboot.

You can do this in the same way (or as an administrator ) .

You can also enable the mode in Windows 8 in 4 different ways

The first two are described in detail at the beginning of the article. The other two are quite similar to the options that are suitable for Windows 10, but we will still look at them in more detail to make it easier for you to navigate.

Diagnostic tools

So, the first method is to activate the buffer format (only suitable if the OS is working normally). To do this we do the following:

The PC will start in Safe Mode, and you can carry out the necessary manipulations.

And another simple option for starting safe mode in Windows 8 is by bootable flash drive or DVD with Windows files. The procedure is as follows:

What to do on Windows 7 and XP

You can enter safe mode in Windows 7 or XP using one of the universal methods described at the beginning of this article. The first option is suitable in cases where the OS is working normally, and the second option is suitable if the PC or laptop does not turn on.

It is worth noting that the operating system is in no way related to the BIOS. It also doesn’t matter what brand of laptop you have – Samsung, Asus, Lenovo, HP, Acer, LG, etc.

What to do if Safe Mode does not start?

Sometimes a PC or laptop stubbornly refuses to enable safe mode. The reason is trivial - viruses damaged the Windows registry. In such situations, there are only 2 options:

• restoring PC operation (system rollback to a checkpoint);
• installation of special programs.

The optimal method, of course, would be the first one - restoring the computer from a checkpoint. If you do not have them saved (for example, disabled), then the only option left is to install recovery programs Windows registry. In this case, you can use the free Safe Mode Repair or SafeBootKeyRepair.

operating system Windows For personal computers Today it is the undisputed leader in the world market. One of the main reasons for the popularity of this OS is often cited as the ease of use for ordinary users.
However, in addition, the Windows system also has good built-in administrative diagnostic capabilities, as well as tools that allow you to carry out basic actions to restore the computer. About one of these "secret rooms" in the Windows system and will be discussed further.

Windows Safe Mode

When working with computer programs Various emergency situations may arise. They can be called as instability of the system itself, so errors in the operation of a specific application. In addition, sometimes, due to the specific nature of some computer software, its installation and removal are possible only in a strictly regulated environment. This may be due, for example, to deep integration of the application with the system.

To solve many problems and eliminate system malfunctions, experienced users use Windows Safe Mode.

First, let’s define what Safe Mode is.

Windows Safe Mode- this is a method of starting the operating system and the conditions for subsequent work in it, which automatically loads drivers, services and applications exclusively necessary for the functioning of the computer

In simple words, Safe Mode- this is loading a computer with a minimum set of programs.

Starting the system in safe mode can be useful in case of unstable operation of the system in normal mode for various reasons. Moreover, often if computer won't turn on in the usual way, that is, there is a possibility that it will still be possible to start it in safe mode. In addition, this operating system option is excellent for removing some viruses and traces of their existence from the computer.
But, for the same reasons why running in Safe Mode can be very useful, this method of turning on the computer is not suitable for everyday use. The resulting Windows functionality is too stripped down. Although, of course, in an emergency, an exception can be made for undemanding operations.

Start Windows in Safe Mode

Now it would be useful to know how to enter Windows safe mode.

The options and paths to enter safe mode may vary depending on the version of your operating system. Let's look at the main ways to enter Windows Safe Mode.

Ⅰ Enter Safe Mode using hotkeys

This method is only suitable for older versions of the Windows system (in the case of Windows 8/8.1 and Windows 10, the method will only work if the system is installed on Legacy BIOS, and not to the new UEFI BIOS). You can use it if you need get into Safe Mode in Windows XP, Windows Vista or Windows 7, or Windows 8/8.1 And Windows 10 with Legacy BIOS.
Turn off the computer. Press the power button and then tap the key several times F8(or F4, less often - other options, depending on the manufacturer of the motherboard/laptop) on the keyboard. In the case of Windows 8/8.1 and Windows 10 on UEFI BIOS, you can try to use the key F8 (F10, F4 or others), but we’ll talk about that below.
A menu will appear in front of us with additional download options

By pressing the up/down arrow buttons on the keyboard, we get to the item Safe Mode and press the key Enter

Ⅱ Enter Safe Mode via System Configuration

This option is suitable for entering Safe Mode on all existing Windows operating systems.
Run the utility on the computer Execute going to Start - All programs - Standard(in Windows 10 the utility Execute is in the catalog Service), or by holding down the keys on the keyboard Start(on some keyboards this is marked as Win) And R. In the window that opens, enter the command

Msconfig

and press the button Enter.

On Windows XP, in a new window, go to the BOOT.INI tab and in the field Boot Options check the box next to /SAFEBOOT. Click the OK button.

On new versions of the operating system, Windows Vista, Windows 7, Windows 8/8.1 and Windows 10 window System Configurations will look a little different

Now we restart the computer. The system will start in Safe Mode.
You just need to keep in mind that after this, with each reboot Windows will start in safe mode. To avoid this, you need to go back to System Settings and uncheck the box Safe Mode

Ⅲ Enter Safe Mode via Recovery Options

This path is suitable for producing running in safe mode Windows 8/8.1 and Windows 10.

So, first we need to enable System Restore mode. This can be done either from Windows settings, and from the shutdown menu:

After this, you will see an action selection window, where you will need to go to Troubleshooting

Boot Options

And click the Restart button

We wait for the computer to restart and see a window with startup options

F1-F12 F4

Ⅳ Enter Safe Mode from the Command Line

The next method is suitable for users who are not afraid to use team Windows string . It also works on all versions of the operating system, up to the newest one today - Windows 10.

Launch the command line on behalf of the Administrator

In the console that opens, enter the command

And press the key Enter

Next, we reboot the machine, wait for it to turn on and see the window with launch options already familiar to us from the previous method

Here you see the line button correspondence diagram F1-F12 on the keyboard and Windows startup options. To get into Safe Mode we need to press the key F4

To turn off appearance Boot options Every time the system starts, you need to run the command on the command line as Administrator

Ⅴ Enter Safe Mode from the Windows installation disk

This method can also be implemented on any version of the Microsoft OS. But, unlike all those described above, we will need not only an already installed copy of the system, but also installation disk Windows the same version that is installed on the PC, or Windows Recovery Disk

We insert the existing disk into the computer/laptop drive and boot from it (you can also use a USB drive with a bootable a copy of Windows). In the first window, select the language and your region and click Next. In the next window you Not click on the Install button and click on System Restore

On the command line we execute the command we now know

Bcdedit /set (globalsettings) advancedoptions true

And click the Continue button. The system will reboot with the startup mode selected.

To disable this option, run on the command line as Administrator

Bcdedit /deletevalue (globalsettings)advancedoptions

Ⅵ Enter Safe Mode through an incorrect system shutdown

This method can also allow you enter Safe Mode on any version and edition of the Windows operating system but we we do not recommend resorting to it , while you have other options. It can be called unwanted or extreme.
The point is that you need shut down your computer urgently:

• or long press the power button on a PC or laptop case;
• or turn off the computer by unplugging the PC power cord or disconnecting the laptop from charger, disconnect the battery from it.

The next system startup after such an abnormal shutdown should begin with suggestions for download options computer.
It only makes sense to resort to such radical measures if, in normal Windows operation, you do not have the opportunity to use one of the methods described above

Working in Windows Safe Mode

We have looked at the main ways that can help you open Windows in safe mode. Next, you need to act depending on the reasons that forced you to start the system in this way.

If you have problems turning on your computer after installing some program or device driver, then you need to remove the problematic software from Windows startup, how to do this is described in detail in the entry:. You may have to completely remove the unstable program from your computer according to the instructions given in the recording

If system failures are caused by a virus attack, then you need to scan your computer with an antivirus utility and get rid of any malware found.

Stable systems to everyone and good luck in mastering the intricacies of Windows