How to open a laptop disk drive with buttons. How to open the disk drive on different laptop models

Disks are gradually losing their relevance, so most notebook manufacturers did not leave a disk drive, but some units are still characterized by the presence of this device: Lenovo, Acer and some others.

But situations often occur when the button breaks or your model only has a slot through which you can drive the disk drive, then you need to adapt to opening the disk drive without using the button.

Check: whether there is a drive on the device

First, it’s worth checking whether you even have a disk drive. Perhaps you just looked at the plug and thought that it was a disk drive, but you were mistaken and you won’t be able to watch a movie from the disk.

Windows 7

Windows 10

Also, if you have Windows 10 or 8.1 on your PC, the drive may not appear because the OS manufacturers believe that the optical drive is outdated device. In this case, you need to do the following:

Open with the program

All methods discussed below are suitable for any model: Lenovo, Acer and others.

This method should work if your device actually has a disk drive. If this doesn't work, try turning off the device to close any unnecessary running programs that are interfering with the drive, then turn it back on and repeat the steps.

If you still don’t see any changes, go to the “Task Manager”:

Reference! Manually, you may not be able to find all the programs that are blocking the drive. To do this, you can install the Unlocker program. By right-clicking on the disk icon in the “My Computer” section, you need to select the icon for this program. It will show which processes are interfering with the operation of the optical drive.

Open manually: emergency method

If none of the above methods help, you can consider manually opening the drive.

Important! To open the drive manually, you need to make sure that the drive is not spinning (you can tell by the sound), otherwise you could do a lot of damage.

Causes of malfunctions: actions to “rescue”

As a rule, the cause of the breakdown can be either mechanical failures or a program failure.

You can determine the cause of the failure yourself if you do open the drive. For example, we pressed a button to no avail, but we used the “Eject” operation and the drive came back into operation, then the fact is that the button itself failed and there is nothing wrong with that.

Video - How to open the disk drive on an Acer laptop

They can also be used in laptops. And sometimes problems arise with them, for example, how to open the disk drive on a laptop without a button or if the button does not work. The solution to the problem can be either software or with a physical effect on the drive itself.

Typically, the optical drive is located on the side of the laptop and has a button to open it. If you don’t find any buttons on the side panels or even a DVD sign, maybe there’s no disk drive on your laptop? It happens that the equipment is not what is stated in the store, and you simply did not notice it when purchasing. Then you will have a plug where the drive is installed; sometimes it is confused with the drive itself. And you will have to install the disk drive yourself, having first purchased it.

It displays a visual keyboard with all the standard keys, so you can select keys with a mouse or other pointing device, or cycle between on-screen keys using a single physical key or group of keys. Computer with touch screen also equipped with a touch keyboard. When you use a touchscreen computer, this touch keyboard appears when you touch a text field or other text input area.

A keyboard will appear, through which you can move around the screen and write text. The keyboard remains on the screen until you close it. To open the on-screen keyboard from the login screen, select the Accessibility button in the lower right corner of the login screen, then select On-Screen Keyboard.

It happens that the laptop still has a disk drive, but the open button is located in a different place on the case, and it is designated as follows:

It is also possible that the button to open the drive is located among the function keys of the laptop and works in combination with the Fn key. Such a function key should also be indicated by the sign:

With the on-screen keyboard open, select the Options key, and then select the options you want. Play a click sound Click the Browse button. . If you minimize the on-screen keyboard and switch to tablet mode, you can return to it using the Job View button.

There are several different types keyboards The most common physical keyboard is connected to a computer. It's an accessibility tool. You can use the on-screen keyboard instead of a physical keyboard to control your computer and write. On-screen keyboard is a visual keyboard with all standard keys. Keys are selected using a mouse or other pointing device, or you can move between individual keys on the screen using a single physical key or group of keys.

Software opening methods

If in the "My Computer" menu you don't see the DVD drive icon, although you know for sure that it is there, the reason may be that the display of optical drives is disabled in the system. This is especially true in Windows 8.1 and Windows 10.

Open the on-screen keyboard

In the Using the touch keyboard section. In the search field, type on-screen keyboard, and then tap or click on on-screen keyboard.

• Drag your finger from the right edge of the screen and tap Search.
• A keyboard will appear on the screen to control the computer and write text.
• The keyboard remains on the screen until you close it.

If you want to open the on-screen keyboard on the login screen, click or tap the Accessibility button in the lower left corner of the login screen, and then click or select On-Screen Keyboard.

They believe that such drives are already obsolete and there is no need to display them. The situation can be corrected by making an entry in the registry operating system. How to do this is described on the page

A common problem that PC users encounter is problems with the drive. If a problem arises, it is not necessary to immediately take the computer to service center. There are several ways to fix the problem yourself. Here's what to do if the drive won't open.

Change the way you enter information on the on-screen keyboard

With the on-screen keyboard open, tap or click the Settings button, and then select the options you want. Play a click sound Use this option if you want to hear a sound when you press a key. When you use this option, the on-screen keyboard expands Use the keyboard to use this mode when you prefer to click or tap the on-screen keyboard when entering text. Using the mouse pointer on keys Use this mode if you use a mouse or lever to move keys. The characters you move to are automatically entered when the pointer remains for a certain amount of time. Use your keyboard to use this mode if you want the on-screen keyboard tool to remain on your keyboard at all times. In view mode, you can highlight areas where you can enter keyboard characters by pressing a keyboard shortcut, a switch input device, or a device that simulates mouse clicks. Use predictive text input Use this option if you want the on-screen keyboard Text tool to enter suggested words so you don't have to type the word each time.

• Review the keys that make it easier to move around the screen.
• Use this option if you want to highlight keys while recording.
• Enable the numeric keypad.

Predictive text input is available in English, French, Italian, German and Spanish.

How to open a disk drive: standard tools

So, the problem is obvious, and you urgently need to remove it. First, use the simplest algorithm: “Start” - “Computer” - “Eject disk”.

The disk drive does not open: mechanical method

If a combination of commands does not fix the problem, try removing the disk mechanically. To do this, take a needle (knitting needle, straightened paper clip) and insert it into the hole on the front panel of the drive until it stops. When you press the lever, the CD-ROM should open slightly. Then we pry the tray with our fingers, pull it out and take out the disc.

If you want to use one of these languages ​​but do not have them installed, install their language files. If you are using mouse pointer mode or scan mode and you minimize the on-screen keyboard by restoring it to the mouse pointer in the taskbar or pressing the scan key.

If you minimize the on-screen keyboard and switch to the Start screen or app in full screen mode, you won't be able to access the keyboard. First, launch the on-screen keyboard and then go to the Start screen or app. To write and enter data, don't rely on the physical keyboard, you can use the on-screen keyboard. Keys can be selected using a mouse or other pointing device, or you can switch between individual keys on the screen using a single key or group of keys.

A knife with a blunt end may be used as an auxiliary tool. By pressing the button, we pry the tray with a knife and try to pull it out. The main thing here is to act very carefully so as not to damage the drive.

Alternatively, you can disconnect and connect the interface wires, and then perform one of the procedures described above.

Launch On-Screen Keyboard by clicking the Start button, then All Programs, Accessories, Accessibility, and finally On-Screen Keyboard. Compatibility with older operating systems must be checked on the laptop. Due to the size of our inventory and its continued expansion, we are unable to locate this information or guarantee installation.

However, for most models there is a solution. The easiest option is to use our installation services. Of course you can try to install yourself. The very first problem is the installation process itself. However, unfortunately, any external drive is not suitable for this purpose. The second problem is the availability of drivers for individual peripheral devices.

If all else fails, you should remove the drive itself and inspect it for damage. In the PC, unscrew the side/back wall, disconnect the cable and remove the drive. On a laptop, such an operation will require more caution and skill. On most models, you must remove the keyboard to remove the drive. But in ASUS, the convenient location of the drive does not make access difficult. To do this, just turn the laptop over and remove a few screws.

Operating system recovery and backup

Installation of operating systems is most often performed using a special hidden section on your hard drive, which starts automatically when you start your computer for the first time. We recommend creating these backup media - if you untie partitioning, this is the only way to restore the system! Otherwise, contact an authorized service center.

This is a modified image of the operating system for specific model laptop or computer. It has already installed drivers for all installed hardware. After installing or restoring the system from this disk, the laptop can be used immediately without the need to install additional drivers.

All of the above activities must be carried out with the computer turned off.

Learn more about why the drive won't open.

Even if you were able to remove the disc from the tray, you need to determine the cause of the problem. The disk drive may jam due to a malfunction that is responsible for the disk being securely located in the drive.

Manufacturer models will offer media restoration for the first time after system installation. Models from this manufacturer are typically supplied including installation media containing the operating system. Models from this manufacturer are equipped with a backup program, which is available after installation directly from the system through the Start menu.

• This is the only way to create a backup of your operating system.
• Late backup is not possible!
• Any repairs are made from these media.
• You can create media through it.
• Then you don't need to load drivers from the floppy disk.

The operating system will only boot for a few seconds, any work will be very fast and without the annoying sound that hard drives emit.

Loosening of the rubber belt that extends the tray also causes the problem. At first, it can be treated with rosin; later, the weakened belt needs to be replaced.

The reason why the drive does not open may lie in the cutting of one of the teeth that the gear comes into contact with. It makes the disc tray move. Due to this problem, the drive makes a creaking sound when opening/closing or becomes completely jammed. The only way out is to restore the tooth. You can make it from hot plastic at home. If you are not sure that you can do it yourself, it is better to take the drive to a workshop. This procedure will take very little time.

So, if your laptop is out of warranty or you don't mind coming. However, whether you can get a warranty on a replacement drive depends on the specific manufacturer, so it's good to be informed. If you do not decide to exchange, you should leave this work to a specialized service where you should have several hundred exchanges.

Once you're done cloning, you can store the old hard drive in the field and use it as backup or portable media. Before cloning, make sure you have downloaded all the data from the old drive to the new drive. You may also happen to me that during the cloning process the cloning software throws an unknown error.

Damage may be purely mechanical in nature: dust or small foreign objects have entered the drive. “General cleaning” will ensure normal operation of the device. If the problem lies in a malfunction of the electric motor, the drive will have to be replaced with a new one.

Spontaneous opening/closing of the drive

If the drive opens and closes, then the cause of this problem may be the result of malware, a mechanical failure of the cable, the closing sensor, or the drive itself. Most often, spontaneous ejection of the tray is caused by manufacturing defects or damage caused during operation of the device.

Check the following

First you need to install the cloning software. If you have a flash drive installed, you can restart your laptop or computer. Therefore, if you choose the automatic mode, there really shouldn't be any problem with it.

Regardless of whether any cloning software is involved, you will always select the default drive and target drive, and before you start cloning, you will see the default state and final state of the data on the new drive. After successfully knocking over the laptop, turn off the laptop completely and prepare a screwdriver. Remove all screws from the back and carefully remove the rear chassis using minimal force. Be careful not to damage the plastic cover. In particular, the plastic spacer rollers through which the screws pass can easily be torn off, leaving the screw no longer in place.

First of all, you need to thoroughly clean the drive and inspect for possible damage. If cleaning does not bring results, you should take the drive to a workshop. Most likely, specific parts will need to be replaced. Although in most cases it is easier to buy a new drive. Now you know what to do if the drive does not open.

If so, feel free to share your experience comments with others. You can put the back cover back in place, just wait until the screws check that everything is working as it should. Popular scenario: you put the disk in your computer, you do something with it, you want to slip it - it's impossible.

My Favorites: Drag and Drop

Probably everything can be done this way. There are a lot of jokes about this, but in the case of ejecting a disk, we can actually use the application. Of course it's not easy to retrieve, but that's one of its features. When the above methods don't start, you may start to panic. But only slowly, because there are still three other methods ahead. Find the drive, right-click it and click Eject.

For those who like to fumble around in the Terminal

The board can also be selected using the terminal.

There are several reasons why the CD tray may not open DVD drive A. We will consider all options for solving the problem in this article.

Solving problems opening the CD/DVD drive tray

First, I’ll tell you about the effective way. He is also the fastest. Each CD/DVD drive has a special hole on the front side for emergency removal of the disc, for example, when the computer is turned off. This hole is about 1mm in diameter and this is what it looks like in a regular computer drive:

Here's an example on a laptop:

This is the hole in different models may be in different places, but will always be on the front. All you have to do is insert a paperclip (or something similar) into this hole. You need to insert it at a right angle, and don’t be afraid to apply some force.

The tray will move out of the drive a little, after which you can pull it out completely by hand.

You just need to right-click on your drive icon and select “Eject” from the menu that opens:

Great, we pulled out the disk. But the tray continues to not open. There is a possibility that the power wire has come loose from the drive. You can turn off your computer, remove side cover and check that all cables are securely inserted.

If after this the tray still does not open, there is obviously a problem with the drive, and you cannot do without service intervention, or, alternatively, purchasing a new drive. Fortunately, even now they cost only about 1000 rubles.

If you have any questions, feel free to ask, we will help you!

No matter how experienced a user of laptops, mobile and other digital devices We didn’t consider ourselves, sometimes situations happen that baffle us. So, not many people understand how to open a disk drive on a laptop without a button, and no matter how much we look for it, it’s not there and that’s it. As you know, there are no situations from which it is impossible to find a way out, and this is no exception.

How to open a disk drive without a button?

1. First of all, it is worth mentioning this option if the laptop’s battery is dead or there is no light, and you did not have time to remove the disk from the drive. So, take a paper clip, straighten it. There is a microscopic button on the drive. She needs to be found. It is important to know that some manufacturers create a very similar LED activity indicator and a manual release hole for the drive door on the drive panel, and therefore you do not need to force a paper clip into the hole unless you are sure that it is not an LED indicator. So, straightening the paper clip, insert it into the hole and push it until there is slight resistance. Next, gently press the paper clip onto the drive. When the drive is unlocked, you need to remove the paperclip from the hole and slowly pull out the tray, removing the disc from it.
2. Some have a floppy or slot-loading drive called slot-loading. In that case external button located next to the disk drives. However, it should be noted that there are a number of slot-loading models that do not have manual unlocking. You can open the drive without a button, no matter how difficult it may seem, through Windows Explorer. Here we use the eject function (click on the drive panel and then select “Eject”). It is important not to knock on the laptop or shake it. Otherwise, it will lead to damage to the gadget.

How to open the disk drive using the keyboard?

A hotkey combination will help with this. So, on most laptops this is Fn+F4. It is possible that a separate key has been created specifically for this, the icon on which will tell you whether it is it or not.

If you have the Alcohol120% program installed, then there is also an “Extract” button here (in case you are going to burn an image from a disk).

If you are the owner of a multimedia keyboard, then use the driver utility to program one of the buttons. This can be done using the “Adjust drive speed” function. Moreover, this can be done with a regular keyboard. So, go to “System Settings”, then to “Keyboard”. The Keyboard Combination tab will appear. We need the “Additional combinations” item. Click on the plus, with which we will add hotkey for the required command. The “Team” and “Name” fields appear, fill them out. Click on “Apply”. A new line appears to which we assign a combination. To do this, just click on it and assign a specific key combination.

If you have Ubuntu installed, then the command responsible for opening the drive tray is next: eject sr0, and for closing - eject – t sr0.

How to open a disk drive without a button on a computer?

When considering this issue, one cannot fail to mention how to open the drive on a personal computer with a system unit. To do this, you need to go to “My Computer” and find the desired drive there. Right-click on the icon and select “Extract”. Everything is not as difficult as it seems. Moreover, this method works most often.

If the device freezes, simply reboot it. Another option for opening the drive without a button is to install special program, which, using software, can close and open the drive.

It's already the twenty-first century, but even this was not a reason to completely abandon disks. Of course, most portable devices, including tablets and netbooks, are simply not designed for bulky components, and therefore are manufactured without a disk drive. But if you become the proud owner of a laptop with a CD-rom drive, you will probably want to figure out how to open it and use it at least once.

Of course, this is a long time ago, but, for example, students and schoolchildren need disk drives quite often. For some reason teachers forget about mass alternative ways receive materials, that is, essays, coursework, etc., and persistently require the availability of electronic media. Moreover, it is desirable that it be a CD-rom disk.

It’s not a pity to give away a disk that costs a penny, but it’s terribly inconvenient. But you have to neglect your comfort and learn how to open the disk drive on a laptop. As an example, let’s look at how this is done on a Lenovo laptop.

Open the drive using the button provided for this

This is, without a doubt, the easiest way to open the device, of course, provided that there is a disk drive at all. Of course, everyone already knows about it, but let’s touch on it anyway. this topic in more detail, because no one is immune from the mistakes that can be made while learning a brand new computer.

For example, learning how to open a disk drive on a Lenovo laptop will be of interest to people who have just acquired their own personal computer. They simply did not physically have time to figure out how everything works here:

• If there is a disk drive, it is located on the right or left side, on the side panel. Although this depends on the individual configuration of the laptop. For example, on the g50 model the drive is installed on the right. A rectangle and the inscription DVD should be drawn at this place;
• If there is no drive, then there is no point in looking for a button, since there is a plug in the place where the optical drive could be installed.

When the button is there and everything is working, then you need to press this button and the disk drive will appear. Again, depending on the features of the system, sometimes the button will have to be held down. Lenovo, as a rule, uses a minimum interval between pressing and opening the drive. But what if you remove the drive? standard methods doesn't work? Now let's look at several alternative options.

Software glitch in laptop

If the drive does not want to work or even open, this does not mean that the problem lies with it. It may well be that the problem is a glitch. software. In this case, it is better not to even try to remove the drive, especially since it will not have any positive result. But if you manipulate the software, it will help a lot:

• Call "Task Manager". This can be done using the Ctrl, Alt and Del key combination. And if it doesn’t work, then log in through the Unlocker software;
• Double-click on the drive icon;
• A list of components used to operate the drive opens on the screen;
• If something interferes with the operation of the device, disable these programs or, conversely, something is disabled, run those programs that are missing.

Problems of this nature often appear on Windows 10. We don’t even know what is causing this. It is possible that icons are being created for non-existent optical drives, and this interferes with the work of the real ones. Although it is important not to confuse the icons yourself, so as not to make a program error even more difficult.

As a rule, restarting Windows sometimes helps, but not always. If this is your option, you can try another radical method. You need to turn off literally everything on your computer, turn it off and remove the battery. But don’t put it back right away, but wait at least ten seconds. After this, Windows should restore normal communication with the drive.

Do the following:

• Log in to “My Computer”;
• Go to "Device Manager";
• Look for components with yellow icons.

In addition, you can reinstall the drivers on the drive, for example, on Lenovo g50 or 45. But use this method preferably if nothing helps at all.

The disk drive on Lenovo cannot be opened because it has some kind of mechanical damage

This too common reason, especially if the laptop fell, hit or something like that. The owner may not even notice what happened. But you can suspect something is wrong if the device used to work normally, but now for some reason has stopped functioning in standard mode.

It is quite possible that the owner simply carelessly removed the disk the last time he used the device. Or the disk has now been installed incorrectly, and therefore the device simply does not want to read it and will not open on its own.

When choosing options for how to remove a disk to a white light, it is advisable to go to a specialist if independent manipulations do not help. Otherwise, in your enthusiasm you will break your laptop. Then the problem with the drive will be the least of your worries.

If the drive is still jammed:

• There is a hole near the opening lid;
• Having found it, you need to insert a piece of wire or a needle there (but not with a sharp end);
• Try to “open” the lid and grab it with your hands;
• Carefully try to pull it out.

But if the cable, cable is broken, or the contact is damaged somewhere, then in this case it is better not to touch the monoblock at all, but to take it to the technician. He will inspect it, and if he can get the job done, he will do so.

When a laptop does not come with a disk drive, but is needed, you can buy a separate device and connect it as needed. Then there will be no problems with repairs and no need to worry about the health of the laptop if the drive gets stuck.