How to turn off dr web for a while. Temporarily disabling Dr.Web antivirus
Sometimes a situation arises that requires disabling the antivirus program, and for a certain period of time. Such moments arise either during the installation of a new program, or in the case of a ban on the launch of certain programs by an antivirus program, often due to the inability to enter certain sites. To understand how to disable dr.web antivirus for a while , you need to perform a certain algorithm of actions, consisting of the following actions:
Picture 1 - in order to prevent accidental disabling of the antivirus program, the system will prompt you to enter a certain code to confirm your intentions.
- After entering the code, you need to click the “Spider Guard” function, which will lead to a temporary disabling of the antivirus program.
In this situation, the computer’s protection becomes weakened, and the system will be at risk of virus infection.
If you need to resume the operation of the Dr.Web program, it is enough to perform the steps described above with the difference that you need to press the program activation button. This activates computer protection.
From time to time, when installing games, the question arises: “How to disable Dr.Web antivirus while installing the game?” But is it worth doing this? Let's look at everything in order.
If you disable your computer's protection while downloading a game, the risk of your system becoming infected with a virus increases many times over. Therefore, for system security purposes, it is recommended to download games without disabling the antivirus program, with which you can have active protection and repel all kinds of virus attacks.
As for disabling the antivirus while installing games, in some cases this is advisable, since the antivirus program may perceive some installation files as viruses.
These simple steps can ensure safe and reliable operation of your computer.
Sometimes an antivirus can only interfere with the user's work. For example, it blocks programs from launching or going to sites that it considers to be viral. In this case, it would be logical to disable the antivirus. But not every such program is easy and simple to disable. This short article will discuss how to temporarily disable Dr.Web antivirus.
The first method is universal, but requires restarting the computer. To do this, click " Start"In the program search field, write " " (without quotes) and open the suggested option.
In the " Are common» place a circle in the line « Normal launch", and in the "" tabs, find the antivirus one by one and uncheck it. All that remains is to save the settings and restart the computer.
The second way is to disable it through the antivirus itself. To do this, right-click on the antivirus icon in the tray and select “ Administrative mode».
In the pop-up window asking you to confirm the changes, answer yes. After that, in the same menu, find the item “ SpIDer Guard", hover over the arrow for the additional drop-down menu and select " Disable».
After this, a window will appear with a security code called “captcha”, which must be entered correctly.
Antivirus is disabled.
If necessary, you can use the same method to disable “ SpIDer Gate", or disable all antivirus components through the menu item " Disable self-defense".
In this case, you will again need to enter a captcha.
You can enable Dr.Web using the reverse steps. In the first case in " "put the checkmarks and circles back and restart the computer, in the second case - in the additional menu " SpIDer Guard" (or " SpIDer Gate") select the item “ Turn on" Or click " Enable self-defense”, if it was she who was turned off. In this case, you will not need to enter a security code; the program will again begin protection in real time.
If there is a need to disable the antivirus program for a while, this is very easy to do. The developer has created a function to temporarily disable the product, for example, when the program does not allow you to enter the sites you need, which happens most often and causes a lot of inconvenience.
So how to do this? We find antivirus icon. This can be done from the toolbar by opening hidden icons. Move the cursor to the icon our antivirus and click once left button mice. The open context menu offers several options, and Computer Defender services are also visible. Click on any of them with the same left mouse button, choose option administrative mode.
Afterwards, there will be an option in the service menu shutdowns– press. And the antivirus program temporarily stops working.
Sometimes the system requires introduction of a special code. We enter it, after which it will be disconnected. 
If required inclusion protection back - we go through the same process, but already select the action " Turn on».
Disabling antivirus self-defense
Sometimes you need to disable Dr.Web self-defense. In this case, you need to follow the same procedure - open hidden icons and click once by the antivirus icon.
Afterwards, move the cursor to castle icon.
We see what has appeared gear, which gives access to system settings. 
Then everything is simple - go to the menu item " Self-defense", and turn it off. 
To return the option, we perform the same operation, but press the power button, everything is extremely simple.
How to completely remove Doctor Web
Whatever the antivirus system is, in some cases you just need to remove it. For example, it is outdated, or you want to try another product. In this case, you must remove all software components.
Eat several ways cope with this task:
- The simple and standard way is through control Panel. We enter the option to remove programs, we find uninstall utility and click. After this, all components of the Dr.Web product are automatically deleted from a computer.
- Download a special program to remove antivirus on the site. Close all tabs and launch the downloaded application. In the process, the system can prompt for code– enter it (photo). And press the key removal.
The system may require reboot computer. To do this, we closed all windows and tabs before the procedure. 
As you know, antivirus programs often issue warnings that may seem unreasonable to the user. The fact is that their operating principle is related to the identification of even minimal threats to the security system, although in some cases they are not such. Sometimes even programs and applications required for installation are perceived as unwanted software. And antivirus Dr. Web (“Doctor Web”) is no exception.
Why do you need to disable your antivirus?
Let's look at how to disable Doctor Web and why this may be necessary. Among the most common situations are redirects or transitions to sites on the Internet that pose a potential threat, and antivirus detection of applications classified as dangerous or unwanted software.
In the first case, everything is clear. Indeed, the site may contain some malicious codes or links that are activated at the moment of clicking. On the other hand, an antivirus first scans the contents of a resource, after which it identifies it no longer as potentially dangerous, but as containing programs and components that are unwanted from its point of view and available for download.
The same thing occurs when downloading or installing some programs or games, and this applies to the so-called hacked licensed versions. Naturally, crackers of official software themselves don’t really bother about the names of activation files, so in illegal distributions you can often find files with names like Crack.exe, KeyGen.exe, etc.
It is clear that the antivirus rightly believes that such files may contain a threat to the system or are undesirable for installation, because it is unable to recognize which application they are intended for. This is where knowing how to disable Doctor Web comes in handy.
Disabling Dr. Web for a while
In the cases described above, the simplest solution to the problem is not a complete, but a partial stop of the relevant services. How to temporarily disable Doctor Web? Nothing could be simpler.
To begin, in the system tray you need to click on the program icon (right-click, right-click), after which in the menu that appears (depending on the product version), you can either select the “Administrative mode” line and answer in the affirmative to allow changes to settings, or go straight to to the line SpIDer Guard. It is this antivirus component that is responsible for monitoring threats in real time.
The drop-down menu contains the “Disable” command. Next, the user will be asked to enter a “captcha” (digital code) in a special field to confirm their actions. As is already clear, to enable the module you will need to perform the opposite action.
Completely disabling startup
Now let's look at the question of how to disable Doctor Web antivirus completely. This cannot be done in the settings of the program itself. You will have to use a universal and proven method - the msconfig command, which is entered into the “Run” menu field (Win + R buttons).
In the main General Settings window, select the “Normal Boot” option. After this, on the “Startup” and “Services” tabs, you need to find the lines of processes related to the operation of the antivirus, and simply uncheck all the boxes. After applying the new settings, you may be prompted to restart the system (for example, in Windows 7, when accessed with Administrator rights, this is not required).
Sometimes it's worth looking at the "Processes" tab. There you also need to find all antivirus processes and disable them. But you shouldn’t be naive and think that the most effective solution to the problem of how to disable Doctor Web has been found. Nothing like this. Some background antivirus services will still run. It’s just that in the settings, even using the above command, the user simply won’t see them.
Disabling additional components
We figured out how to disable Doctor Web. Sometimes you may need to disable some additional features such as SpIDer Gate, SpiDer Mail or the built-in firewall. In principle, such a shutdown is performed in exactly the same way as described earlier. It is not recommended to disable the self-defense function at all.
Modern antiviruses work in a complex way, blocking not only obviously malicious code, but also potentially dangerous files. This means that Doctor Web will block even those programs whose behavior it just looks dangerous.
Why do you need to disable your antivirus?
The dr.Web network firewall is much less tolerant of files and processes than the Windows firewall. As a result, the protection works much more often than security actually requires.
Doctor Web can block the following actions:
- Access to potentially dangerous websites, where only one or a few pages on the resource can potentially cause harm;
- The work of bootloaders, installers, programs for changing operating system settings and other software whose behavior resembles some viruses;
- Operation of applications with key generators and any hacked software (including any programs downloaded from torrents and other dubious sources).
When actively working with files on the Internet, such restrictions greatly interfere. To solve the problem, you can temporarily pause the protection or completely disable the antivirus for the desired period.
How to temporarily disable dr.Web
Temporary suspension of work a great way to get rid of the annoying protection of the dr.Web firewall, but without stopping the system completely. If necessary, it is enough to resume the program, instead of waiting for the system to start and check again.
Important: Security settings can only be changed in administrative mode. Switching between administrative and user modes is only possible if the PC user has administrator rights. The switch is made in the SpIDer Agent context menu (antivirus icon), which appears when you right-click on it.
To disable protection for a while you need to:
From this moment on, the antivirus will not work, although it will continue to be running. To resume work, you need to switch the sliders to the reverse position.
Which protection components can be disabled?
Dr.Web allows you to enable or disable individual protection components:
- Mail antivirus;
- Firewall;
- Parental control;
- Protection of mail, files, preventive PC protection and more.
For example, there is no need to enable parental controls if the computer or laptop is used by one adult. To be fair, most protection components actually do a good job, and disabling the antivirus for a long time jeopardizes the security of your computer.
Disabling the antivirus self-defense system
All latest versions of Dr.Web (10, 11 and later) have the ability to disable the self-defense system. The need for this may arise in case of conflicts with other antiviruses and other software.
To disable the system you need:
- Open Doctor Web, go to the settings section (click on the gear icon).
- In the new window that opens, select “Main” from the left menu.
- In the list that appears, you need to find the “Self-Defense” item and move the slider to the “Disabled” position.
From this point on, all self-defense components will stop working until the slider returns to its original position. The exception is when you restart the computer: in this case, the program will apply the default security settings. Both partial and complete disabling of protection will have to be done again.
How to completely disable Dr.Web via msconfig
If temporary measures do not help and the antivirus continues to block access to sites and interfere with life in other ways, you can disable it completely. To completely disable Dr.Web protection you will need to do several steps:
The described sequence of actions allows you to completely disable the antivirus without uninstalling it, including preventing it from starting when you restart the computer. But you should understand that any interference with the operation of the msconfig task system may be fraught with disruption of the antivirus and operating system if something is done wrong. If an antivirus blocks a site, it is better to use the provided functionality to disable protection for a while.
