How do I erase data from a DVD to prepare it for new recording? How to clean DVD. Methods for cleaning laser drives and disks How to wipe a disk so that it works
Many users prefer to buy rewritable discs in order to be able to record information on it several times. But before you clear a dvd rw disc of information, you should choose the most suitable way. This can be done using some disc burning programs, or you can use the tools installed on your computer. operating system.
If not installed programs To burn discs, you need to go to the “My Computer” section and in the window that opens, find the CD/DVD drive icon.
We move the mouse cursor over the drive icon that contains the disk that needs cleaning.
Click on it with the right mouse button.
In the drop-down menu that opens, find the line where it says “Erase this DVD-RW,” and then click on it with the left mouse button.
The “CD Burning Wizard” window will open, in which you need to click “Next”.
All files located on this disk are deleted. This process can take from a few seconds to several minutes, depending on the number of files written and the speed of the rewritable disc.
After cleaning the disk is completed, the “CD Burning Wizard” window will show information that the operation was successful and the media is now suitable for burning new files. Here we click the “Finish” button.
If it is not cleared after performing the above steps, the CD/DVD drive may be faulty, or the disc may no longer be suitable for future recording.
You can clean a DVD-RW disc very quickly and easily using UltraISO or NeroBurningROM.
To use UltraISO to clean the disk, you need to select the “Tools” menu in the open program window, and in the drop-down menu with the left mouse button select the line “Burn CD image”.
The “Write image” window will open, in which we click “Erase”.
If the NeroBurningROM program is installed on your computer, then to clean the DVD-RW disc, select “Recorder” in the open program window, and click on the “Erase rewritable disc” line in the drop-down menu.
In the window that will then open (Erase rewritable disk), select the drive, disk cleaning method and erasing speed.
After clicking the “Erase” button, the process of cleaning the rewritable disc will begin.
When cleaning DVD-RW discs, it is worth performing a complete erase of all files. This will help prevent old data from being read in parallel with new recorded information being read.
If the disk was not cleared immediately or not on the first try, you should not use it, as this may lead to the loss of information that will be written to it later.
A broken DVD or CD drive in laptops is the most common defect in devices that have been in use for more than 2-3 years. Dust, which will definitely settle on the focusing lens after many years of operation, will certainly, if it does not lead to a complete failure of the disk drive, make its operation less reliable and fast. The reason for a complete refusal to perceive or record information from a computer onto optical media may lie in both a hardware and software malfunction of the system. Remember: the optical drive in laptops may refuse to read information from DVD discs for so many reasons.
Firstly, it is necessary to 100% eliminate the possibility of a software failure in the operating system. You can simply insert a disk into the drive that can be used as a boot disk. Either an installation distribution with Windows or some kind of service disk designed to work with a hard drive, as well as for treating viruses, banners, preparing the system for installing an operating system from scratch, etc. will be suitable. The main thing is to set in the BIOS that the DVD drive is the first one to boot, i.e. It is from it, and not from the hard drive, that you need to boot. Probably, many who independently installed the operating system either from a disk or from a flash drive know what we are talking about. If loading such a disk is quite successful, then the problem should be looked for in the installed operating system, namely: in the drivers, as well as in software products, which can in one way or another change the system configuration of virtual and physical optical drives. Remove all dubious software for burning and copying DVDs, and also check in the device manager whether your drive is detected correctly or not. Of course, it is almost impossible to describe all software malfunctions in one article, but we can give universal advice: perform a system restore.
Secondly, if the drive refuses to accept boot disk, then most likely there is a hardware problem. Often the solution to the problem comes down to cleaning the focusing lens. Dust falling on this lens prevents the beam of the laser head from normally transmitting the signal reflected from the DVD disc. If at any stage of operation this led to read or write errors, then one “fine” day the drive may simply refuse to read a completely clean and new disk. The most correct way to solve this problem is to clean the focusing lens.
Nowadays, so-called cleaning discs have become widespread. The idea behind such discs is certainly good, but the technical execution is not always acceptable. Some samples can, instead of being useful, simply “finish off” the sensitive mechanisms and optics of the laser head. Also, incorrect use of cleaning discs can lead to the user simply completely destroying the drive. The instructions for such disks are often written in either English or Chinese, which makes understanding the principle of operation, purpose and use of such a disk simply inaccessible to a Russian-speaking person. The main mistake users make is incorrectly applying the cleaning liquid. As a rule, it needs to be applied only to certain cleaning bumps, and very little at that, placing the disk at approximately an angle of 45 degrees relative to the horizon line. Excessive amounts of this liquid simply flood the laser head, making reading information virtually impossible.
If we talk about Chinese cleaning discs in the 100-150 ruble category, then their purchase will not be justified both from a practical and economic point of view. And if your problem is not in the lens, then this is money thrown away. To protect the reputation of cleaning discs, we note that new contactless cleaning discs are now appearing. Their main difference is that they work like wind turbines, that is, they blow air through the laser head without direct contact. We recommend purchasing these cleaning discs without fear of damaging the sensitive elements of the optical drive.
How to clean a DVD drive without a cleaning disc
Many repairmen, although they themselves sometimes recommend using cleaning discs, never use them. The cleaning disc is a solution for novice users and housewives. You can clean the disk drive much more professionally and efficiently only when you remove it from the laptop and disassemble it. To disassemble the drive, no complex equipment or conditions are needed. All you need is a table, a set of screwdrivers, a paper clip, a needle, a syringe, ear sticks, and isopropyl alcohol.
How to remove a disk drive
First, you need to turn off the power to the laptop. Turn it face down and remove the battery.
No matter how funny and unreliable this may seem, the fact remains: on all modern laptops, the entire drive is secured to the laptop using one screw. We take a thin Phillips screwdriver and remove it.
Also this method You can use it when you urgently need to remove a disk, but the electricity is turned off and the battery is low. After inserting a needle or paper clip into the technological hole, the disk drive will obediently open, and you can pull it out completely by pulling the disk tray.
How to disassemble a disk drive
Turning open optical drive face down, you can see the rear panel cover, which hides many important elements of the laser system.
Remove the 4 retaining screws and the cover will obediently come off without the slightest effort on your part. After removing the cover of the rear panel of the laser drive, we have access to the back of the laser diode, as well as the optical system.
Then you can put on the cover and tighten the 4 mounting screws.
How to clean a focusing lens
The lens is very sensitive to touch, so it is better not to touch it again with your hands or tools. To begin with, you can try to limit yourself to blowing from a can of compressed air.
If this does not help, we recommend using an ear stick pre-moistened in 90% isopropyl alcohol to wipe the lens. Use the other dry and clean end of the stick to remove the remaining alcohol. Remember that using cologne, moonshine, or vodka for these purposes is simply unacceptable. You will only do harm. Isopropyl alcohol evaporates quickly, is relatively non-toxic, and also does not leave marks on glass and lenses, which is very important for the technical task at hand. Then you need to dry everything again using a can of compressed air. All that remains is to assemble everything, insert the drive and screw in the fastening screw. Assembly is simple and intuitive.
Finally, we note that in some cases, the breakdown still cannot be eliminated, since it may lie in a burnt-out LED laser, worn-out mechanics, burnt-out driver microcircuits, etc. Therefore, the last repair option is to completely replace the DVD drive.
You often come across the fact that a previously perfectly playable disc suddenly stops loading or the files loaded on it simply do not open, although the drive seems to have detected their presence. What happened in this situation? Is the drive broken or is it still time to throw this disk in the trash? There are several ways to try to solve this problem yourself without drastic measures to replace the drive or remove the disk itself from use.
- To determine whether the drive is the cause or not, you need to try playing several discs using it. And if he doesn’t read only a specific version, then it’s not his fault. If the situation repeats when discs stop reading or are problematic to play, then this is a problem with the drive.
- In the case of a problem disk, you must first clean it of dirt. There are many means for cleaning them, but from experience we can say that there is no point in spending money on any liquids - discs can be easily treated in warm water and soap. After this procedure, they must be blotted with a well-absorbing towel and allowed to dry before placing them in the drive again.
- In the case of a dirty laser read head of the drive, you can get by with purchasing a special “cleaning disk”. Or you can remove the drive from the computer and disconnect the protective cover by moving it backwards and upwards. Then you need to use something thin but strong, for example, a pin on the front panel through the hole to press the latch and open the tray that blocks access to the lens by pressing on it. It is necessary to blow off large dust from the surface of the lens using a can of compressed air or even an ordinary blower, but in no case with your mouth. The pear must be without talc inside, otherwise everything will become even worse. Using a brush and lens cleaning liquid, you need to rinse the lens thoroughly, making light movements that do not press on it at all. After this, the lens should dry, and to prevent dust from getting on it again, it is better to cover it with something during the drying period. If plaque forms after drying, it must be removed with a dry soft brush. After this comes the process of assembling the drive.
The disc itself may not only be dirty, but also heavily scratched, which also affects the ease of playback. It is possible to restore its surface by polishing. With large and deep scratches, it is unlikely that anything will work out, but if there are a lot of thread-like damage on it, this option can be “cured.”
The simplest method requires clean rags and goyim paste. The disc must be well wetted with water and a little paste applied to it, which must be spread evenly over the entire surface of the disc. Then, using a rag, you need to polish from the center of the disk to the edges until the paste simply disappears. The number of such processes will depend on the state of the disk after each stage. As soon as the disappearance of the most conspicuous scratches is noted, the disc can be considered to be polished. After polishing, the disc should be rinsed thoroughly, blotted and allowed to dry. After this, you can try to play back the recording.
And at the end, a little advice. If you need to download a driver for your printer, scanner, modem or laptop, you can always do this on the website www.hwdrivers.com or www.driver.biz.ua.
Related articles.
To burn discs correctly you need to use special programs. The most famous of them is called Nero, but, unfortunately, it is paid.
How to clean dvd rw disc
There are also free options - CDBurnerXP, BurnAware and others. They are no worse, but you need to find such a program on the Internet, download it to your computer, then install it correctly and learn how to use it.
What kind of discs are there?
Well, and, among other things, disks can be divided into “full” and “empty”. That is, those on which something has already been recorded (films, music, etc.) and those on which there is nothing.
Burning discs
Burning discs in Windows XP
Insert the RW disk into the drive.
And open the CD/DVD drive in it:
Burning Windows 7 discs
Copy them, that is, right-click on any of the selected files (folders) and in the list that appears, click on the “Copy” item.
Insert a blank disc into the drive.
How to erase a Windows 7 disk
How to clean a DVD disc
A mini-menu will appear on the screen in which the program will prompt you to determine the working drive. This should not be a problem, because, as a rule, in most cases there is no choice: in computers and laptops there is only one, if there is no connection to the equipment. external device. Click the "Open Drive" button and insert the disk, then click "Erase Disk" and wait for the erase to finish.
Unfortunately, there are some discs that cannot be cleaned.
But they can be rewritten! In any recording option, specify for the program the files that you want to save to disk. Knowing how to burn songs to discs and films, you will free yourself from unnecessary spending.
Now you know how to clear the disk from unnecessary files.
How to clean a DVD disc
As you have already understood from the article, “Disk Studio” is a convenient software for working with disks. You can quickly write absolutely any information to external media or rewrite old disks, filling them with new and useful data.
How to burn and erase a disc
In this lesson we will learn how to write files and folders from a computer to a blank disk. We will also talk about what types of discs there are and how they differ from each other.
In previous lessons we learned how to copy files and folders. Using copying, you can write files to your computer, to a flash drive, or copy them from your phone or camera. But not to disk. If we try to write something to an empty disk in this way, it will still remain empty.
To burn discs correctly, you need to use special programs. The most famous of them is called Nero, but, unfortunately, it is paid. There are also free options - CDBurnerXP, BurnAware and others. They are no worse, but you need to find such a program on the Internet, download it to your computer, then install it correctly and learn how to use it.
All these movements make sense if the user often needs to write information to disks. But there is another, simpler way - without any programs.
The good thing about it is that it is universal. That is, in this way you can write files and folders with files to an empty disk without additional programs and settings on almost any computer.
Among the disadvantages, it should be noted that on computers with Windows XP, this method can only be burned to a CD - not to a DVD.
What kind of discs are there?
Discs come in CDs and DVDs. Many people think that only films are recorded on DVDs, and everything else is recorded on CDs - music, documents, photographs. In fact, this is not true. They differ only in size.
A DVD contains four or even eight times more information than a CD. That is, if one movie can fit on a CD, and even then not in very good quality, then four movies or even more can be recorded on a DVD disc. Music, photos, documents and other files and folders can be burned to either a CD or DVD.
There are also R and RW discs. The difference between them is that information can be written to R only once, while information can be written to RW many times. We wrote it down, used it, and then erased it and wrote down something else.
Well, and, among other things, disks can be divided into “full” and “empty”.
Tip 1: How to format if the disk is write-protected
That is, those on which something has already been recorded (films, music, etc.) and those on which there is nothing.
Burning discs
First you need to find out what Windows version installed on your computer. To do this, open “Start”, right-click on “Computer” (My Computer) and in the list that opens, click on “Properties”.
A window will open in which it will be written which system is installed.
Burning discs in Windows XP
Select the files and folders you want to burn to a blank CD:
Copy them, that is, right-click on any of the selected files (folders) and in the list that appears, click on the “Copy” item.
Insert a blank disc into the drive.
Open the disk on your computer. To do this, open “My Computer”:
And open the CD/DVD drive in it:
Right-click on an empty space and click on "Paste".
The files and folders you copied will be pasted onto the disk. But this does not mean that they signed up for it. To do this, you need to right-click on an empty space and select “Burn files to CD” from the list.
The “CD Burning Wizard” window will open. You can type a name for the disc in the CD Name field, but this is not necessary. Click "Next" and wait.
When the disc is written (the green bar fills and disappears), a new window will open in which you need to click the “Done” button.
Even if such a window does not appear, the disc is still recorded.
Most likely, he will move out of the computer on his own. Thus, the computer reports that the recording was successful and the disc can already be used.
How to clean up a disk in Windows XP
You can clean the disk only if it is reusable. To do this, it must have RW written on it. If the letter R is written on the disk, then it cannot be erased; it is disposable.
Insert the RW disk into the drive.
Open it on your computer. To do this, open “My Computer”:
And open the CD/DVD drive in it:
Then right-click on an empty space (on a white field) and select “Erase this CD-RW” from the list.
A new window will open. Click on the “Next” button and wait until all information is erased. When this happens, a "Done" button will appear. Click on it. That's it, the disk is clean and you can write something on it again.
Burning Windows 7 discs
Select the files and folders you want to burn to disk:
Copy them, that is, right-click on any of the selected files (folders) and in the list that appears, click on the “Copy” item.
Insert a blank disc into the drive.
Open "Computer" (Start - Computer).
Open the CD/DVD drive. To do this, click on it twice with the left mouse button.
A small window will appear. You need to select the type of disc you are going to burn. There are two types available - “As a USB flash drive” and “With a CD/DVD player”.
The first option is more convenient and modern: you will get a disk very similar to a flash drive - you can write files and folders by normal copying, and erase them from it simple removal. But such disks may not open on some computers.
The second option - “With a CD/DVD player” - is classic, that is, the same as in Windows XP. It is suitable if you want to record music and plan to listen to it not only on the computer, but also on players (for example, in the car). This option is less convenient, but more reliable - a disc recorded in this mode will open on any computer.
Click on the type that suits you. Then click on the “Next” button.
If you selected As a USB flash drive, a warning will appear indicating that you will have to wait until the disk is prepared for recording. By the way, sometimes you have to wait a long time - more than ten minutes. Click Yes.
When everything is ready, the window will disappear and a new small window will appear in which the computer will “offer” to open the folder to view files.
But even if such a window does not appear, it’s okay, just open “Computer” again and open “CD/DVD drive”.
An empty folder will open. Right-click on an empty space and click on "Paste".
After some time, the previously copied files and folders will be added. That's all, the disc recording was successful!
If you selected type C CD/DVD player, a blank disc will open. Right-click on an empty space and click on "Paste".
The files and folders you copied will be pasted onto the disk. But this does not mean that they have already signed up for it. In order for this to happen, you need to right-click on an empty space and select “Burn to disk” from the list.
A new window will appear. You can type in the name of the disc, but this is not necessary. Click the "Next" button.
Now we need to wait. When the disc is written (the green bar fills and disappears), a new window will open in which you need to click the “Done” button.
But even if such a window does not appear, the disc is still recorded.
Most likely, he will move forward on his own. Thus, the computer “tells” us that the recording was successful and the disc can already be used.
How to erase a Windows 7 disk
We can erase a disk only if it is reusable and called RW. If the letter R is written on it, then the disc is disposable and cannot be erased.
Insert the disc into the drive and open it on your computer (Start - Computer - CD/DVD drive).
Try deleting the file or folder. To do this, right-click on the file (folder). A list will open. See if it has a “Delete” option. If there is, then delete the information through this item.
And if there is no such inscription, then right-click on an empty space (white field) and select “Erase disk” (or an item with a similar name) from the list.
How to clean a DVD disc
Burning files to disk is a proven method of saving important information in a safe place. True, there is one “but”: not always and everyone has a “blank” suitable for recording at hand. And if you are now faced with such a problem, do not rush to get upset ahead of time! After all, you can use absolutely any old scratch disk that you have to record data.
"Disc Studio" is a multifunctional disc burning program that will help you capture the folders you need from your computer and separate files or erase unnecessary information from already full disks. Read the article and you will learn how to clean up the disk in this application.
Step #1. Download the program from the website
To get started, visit the special page of our website, where you need to download a disc burning program to your computer. Once the download is complete, run installation file and follow the instructions. Select the location where you want to place the program and wait until the archive is unpacked. Then start working with the application by double-clicking on the software icon.
Step #2. Launch the program and specify the desired option
The main menu of “Disk Studio” will open in front of you, where you need to select and specify the operations that the program should perform. The application allows you to work with both CDs and DVDs. You can quickly figure out how to clear a DVD disc of old files, and then burn songs, videos or any other data onto the selected media. To delete information from the disk, click on the “Copy and erase” tab and select “Erase disk”.
Step #3. Clear your disk of unnecessary files
A mini-menu will appear on the screen in which the program will prompt you to determine the working drive. This should not be a problem, because, as a rule, in most cases there is no choice: in computers and laptops there is only one, if no external device is connected to the equipment.
How to burn and erase a disc
Click the "Open Drive" button and insert the disk, then click "Erase Disk" and wait for the erase to finish.
Step #4. Rewriting an old disc
Unfortunately, there are some discs that cannot be cleaned. But they can be rewritten! In any recording option, specify for the program the files that you want to save to disk. Knowing how to burn songs to discs and films, you will free yourself from unnecessary spending.
To overwrite an old disc, configure additional options: speed, the name that needs to be assigned to the disk, if necessary, request its verification and turn off the PC after recording is completed. Don't forget to insert the disc into the drive. When the program asks for confirmation to overwrite and delete files, click Yes.
Now you know how to clean your disk from unnecessary files. As you have already understood from the article, “Disk Studio” is a convenient software for working with disks. You can quickly write absolutely any information to external media or rewrite old disks, filling them with new and useful data.
How to erase a DVD/CD RW disc in Windows 7
To be able to rewrite data on a DVD, you must have a DVD writer (DVD+RW format) installed on your computer. In modern laptops and computers of the latest configuration, as a rule, such DVD-roms are already included in the equipment package.
There are two types of DVD discs - rewritable (RW) and non-rewritable (R). In the first case, you can use the drive several times, deleting and writing new data to it again; in the second option, information can be written to the disk only once. In our case, we need DVD RW. Before writing new information to a disk with data already on it, you must delete the old data (format the disk). This can be done using a special software, or using the operating system installed on your computer.
How to delete information from a DVD+RW or CD+RW disc
If your computer has Windows XP or earlier versions of the operating system installed Windows systems, then it is best to use special programs to format DVDs. For example, Nero Start Smart, which is one of the most popular among PC users. It allows you not only to clear the disk of old information, but also to write new data to it. The program is especially popular because, in addition to stable operation, it also has a very convenient and visual interface. 
You can download the Nero installation file for free on the Internet and then install it on your PC, following the installer's instructions step by step. After this, it is best to restart the computer, then insert into the DVD drive required disk and use the desktop shortcut to launch Nero Start Smart.
In the main menu of the program window that opens, find the “Advanced” function and click on it. In response to this, a dialog box will open in which you need to click on "Erase DVD", thereby activating the “Program Operation Wizard”. The wizard will display prompts on the screen, using which you can clear the disk of unnecessary information. Once the disk has been successfully formatted, a notification will appear on the monitor screen.
Use built-in disk cleaning programs
Operating systems Windows Vista and Windows 7 have intuitive and stable built-in capabilities for formatting DVDs. After the system independently detects the disk installed in the drive, a dialog box will appear on the monitor screen in which you need to click on the “Burn files to disk” function. In the new window that opens, you need to select the disk name, then click on “Show formatting options” to set the parameters for future recording to the disk. If the new information will consist of files of the same type (for example, movies or music), then you need to select the Mastered option so that the disc can be read well by the equipment that plays these files in the future. To collect different types of files on one disk, it is better to choose LFS. Having specified the desired parameter, click on the “Next” button. In response to this, the formatting process will automatically start, after which a corresponding message will appear on the monitor screen.
Useful video
We have prepared a video especially for you on how to clear data from a CD/DVD disk:
Each user during operation personal computer or laptop sooner or later begins to notice that his computer has begun to work much more slowly. There are many reasons for this, but the most common is the accumulation of system garbage and unnecessary temporary files. In this article we will tell you how to clean hard drive from unnecessary programs and files.
For cleaning hard drive we need a free utility called CCleaner.
This program is the best in its class, not only that, many paid analogues cannot compete with CCleaner.
Download CCleaner for Windows
So, download the utility, go through the installation procedure and launch the application.
At the very beginning, we will clear the hard drive of all unnecessary files, then we will eliminate registry errors, then we will remove all unnecessary programs from startup and completely remove them.
Hard disk cleaning
To clean the hard drive, we just need to click on the “Analysis” button.
In our case, 668 megabytes of system garbage were found, which is a rather modest result, since this computer is scanned regularly. If the hard drive has not undergone such a test for at least a month, then the amount of system garbage and temporary program files will amount to several gigabytes. In most cases, these files are the reason for the slow operation of the computer. To get rid of these unnecessary files, you need to click on the “Cleanup” button and wait a few minutes while the program cleans up your hard drive.
In order to achieve even greater results, you need to eliminate all errors in the system registry.
Cleaning the registry
To clean the registry, you need to open the “Registry” tab and click on the “Search for problems” button. Next, the error detection process will begin, which usually lasts several minutes. After the check is completed, you will see a list of all existing problems in your registry.
To correct all errors, click on the “Fix...” button, after which the program will offer to save backup copy your system registry. To avoid problems, we advise you not to ignore this suggestion and save a copy on your computer's hard drive. Next, click on the “Fix marked” button and wait for the error correction process to complete.
Startup management
Many programs are added to automatic start, which gives them the ability to start immediately after the operating system boots. If a large number of programs accumulate in autorun, then Windows boot takes much longer than it could have. Some of these programs are really necessary, but many are a waste of your computer's resources. To remove unnecessary programs from autorun, you need to select the “Service” tab, and then go to the “Startup” item.
Check out the list of available programs in startup, and disable all unnecessary software. To do this, click on the necessary program and click on the “Turn off” button.
Attention! Do not disable programs that are located in system folders (System32, Windows, Drivers and others). Disabling programs from these directories may adversely affect the stability of your computer.
Uninstalling programs
The presence of unnecessary software does not have the greatest impact on the performance of your computer, unless of course these programs are not in startup. But these programs take up disk space that could be used more usefully. To remove programs, you need to open the “Services” tab again, then select “Remove programs”.
Then select the program that needs to be removed and click on the “Uninstall” button.
Thanks to these simple steps, we can significantly increase the performance of your computer. Also slow work computer problem can be caused by severe fragmentation of the hard drive. To get rid of this problem, you need to defragment your hard drive.
To be able to rewrite data on a DVD, you must have a DVD writer (DVD+RW format) installed on your computer. In modern laptops and computers of the latest configuration, as a rule, such DVD-roms are already included in the equipment package.
There are two types of DVD discs - rewritable (RW) and non-rewritable (R). In the first case, you can use the drive several times, deleting and writing new data to it again; in the second option, information can be written to the disk only once. In our case, we need DVD RW. Before writing new information to a disk with data already on it, you must delete the old data (format the disk). This can be done using special software, or using the operating system installed on your computer using your own means.
How to delete information from a disc - DVD+RW or CD+RW
If your computer has Windows XP or earlier versions of the Windows operating system installed, then it is best to use special programs to format DVDs. For example, which is one of the most popular among PC users. It allows you not only to clear the disk of old information, but also to write new data to it. The program is especially popular because, in addition to stable operation, it also has a very convenient and visual interface.
You can download the Nero installation file for free on the Internet and then install it on your PC, following the installer's instructions step by step. After this, it is best to restart your computer, then insert the desired disc into the DVD drive and use the desktop shortcut to launch Nero Start Smart.
In the main menu of the program window that opens, find the “Advanced” function and click on it. In response to this, a dialog box will open in which you need to click on "Erase DVD", thereby activating the “Program Operation Wizard”. The wizard will display prompts on the screen, using which you can clear the disk of unnecessary information. Once the disk has been successfully formatted, a notification will appear on the monitor screen.
Use built-in disk cleaning programs
The Windows Vista and Windows 7 operating systems have intuitive and stable built-in capabilities for formatting DVDs. After the system independently detects the disk installed in the drive, a dialog box will appear on the monitor screen in which you need to click on the “Burn files to disk” function. In the new window that opens, you need to select the disk name, then click on “Show formatting options” to set the parameters for future recording to the disk. If the new information will consist of files of the same type (for example, movies or music), then you need to select the Mastered option so that the disc can be read well by the equipment that plays these files in the future. To collect different types of files on one disk, it is better to choose LFS. Having specified the desired parameter, click on the “Next” button. In response to this, the formatting process will automatically start, after which a corresponding message will appear on the monitor screen.
Useful video
We have prepared a video especially for you on how to clear data from a CD/DVD disk:
