Why a Packard Bell laptop won't turn on, the black screen of which indicates a problem, is almost impossible to determine with accuracy without proper knowledge. There is no point in waiting for computer equipment to start working if it just sits there for a while. Just like trying to solve a problem on your own.

When a Packard Bell laptop does not turn on, the user almost always begins to look for what to do about it. open access. But not everyone takes into account that the same laptop malfunction does not always depend on identical factors.

It is important to quickly restore the functioning of equipment if, for example, the safety of personal or work data depends on it. Moreover, interference in a mechanism or system by an unprofessional person can lead to the fact that it will simply be impossible to restore the equipment later.

Packard Bell laptop won't turn on. How to enable? First you need to figure out whether there really is a problem. If the laptop is infected, and nothing changes when connected to the network, then you should really seek computer help in Moscow.

Don’t worry that equipment repairs can cost a huge amount. Some users, having diagnosed the problem using the Internet, decide that their laptop cannot be repaired and begin saving for a new one.

We, in turn, guarantee that the equipment will work after our repair as well as new, but at the same time it will cost much less.

Packard Bell laptop won't turn on and no lights are on?

Our technicians will identify and resolve this problem quickly and efficiently. Moreover, we offer users not only a loyal pricing policy, but also a huge list of services that CopyMasters specialists can perform not only in workshops conveniently located in many districts of the capital, but also at their address.

The CompuMasters service center offers high-quality repair and diagnostic services for any computer equipment, regardless of the complexity of the work.

Our pricing policy, individual approach to each client and fast, and most importantly, high-quality service will pleasantly surprise users. You can rest assured that prompt assistance will be provided to you at the highest level.

Our workshops are located in almost all areas of Moscow near metro stations, which allows us to reduce the time spent searching for service and repair equipment in a matter of hours.

At the same time, to further save personal time in our computer service center There is a service to call a technician to your home. Thus, customers will not only be able to save time and effort, but also monitor the repair, as well as ask all their questions along the way.

Also, every user who is faced with any problem has the opportunity to receive all the necessary advice over the phone completely free of charge. Our specialists are always happy to provide computer help in any form.

Good afternoon.

Many problems on a laptop can be solved if you reset the BIOS settings to factory settings (sometimes they are also called optimal or safe).

In general, this is done quite easily, it will be more difficult if you set a password on the BIOS and when you turn on the laptop it will ask for this same password. Here you can’t do without disassembling the laptop...

In this article I wanted to look at both options.

1. Reset laptop BIOS settings to factory settings

To enter the BIOS settings, the keys are usually used F2 or Delete(sometimes F10 key). It depends on the model of your laptop.

Finding out which button to press is quite easy: reboot the laptop (or turn it on) and look at the first welcome window (it always indicates a button to enter the Bios settings). You can also use the documentation that came with the laptop upon purchase.

And so, we will assume that you have entered the Bios settings. Next we are interested in Exit tab. By the way, in laptops of different brands (ASUS, ACER, HP, SAMSUNG, LENOVO) the names of the Bios sections are almost the same, so there is no point in taking screenshots for each model...

Setting up BIOS on an ACER Packard Bell laptop.

Next, in the Exit section, select a line like “ Load Setup Defaults"(i.e. loading default settings (or default settings)). You will then need to confirm in a pop-up window that you want to reset your settings.

And all that remains is to exit the BIOS while saving the settings made: select Exit Saving Changes(first line, see screenshot below).

Load Setup Defaults - loading default settings. ACER Packard Bell.

By the way, in 99% of cases with the settings reset, the laptop will boot normally. But sometimes a small error occurs and the laptop cannot find where to boot from (i.e. from what device: flash drive, HDD, etc.).

To fix it, go to Bios again and go to the section Boot .

Here you need to change the tab Boot Mode :UEFI change to Legacy, then exit the Bios saving the settings. After rebooting, the laptop should boot normally from hard drive.

Changing the Boot Mode function.

2. How to reset BIOS settings if it requires a password?

Now let's imagine a more serious situation: it so happened that you set a password for the Bios, and now you have forgotten it (or your sister, brother, friend has set a password and is calling you for help...).

Turn on your laptop (in the example, an ACER laptop) and see the following.

ACER. The BIOS asks you to enter a password to use the laptop.

To all brute force attempts, the laptop responds with an error and after several incorrect passwords are entered, it simply turns off...

In this case, you cannot do without removing the back cover of the laptop.

You only need to do three things:

• disconnect the laptop from all devices and generally remove all cords that are connected to it (headphones, power cord, mouse, etc.);
• remove the battery;
• remove the cover protecting RAM And hard drive laptop (the design of all laptops is different, sometimes you may need to completely remove the back cover).

Overturned laptop on the table. You need to remove: the battery, the HDD and RAM cover.

Laptop without battery, hard drive and RAM.

There are two contacts under the RAM strips (they are also signed JCMOS) - these are what we need. Now do the following:

• close these contacts with a screwdriver (and do not open them until you turn off the laptop. This requires patience and accuracy);
• connect the power cord to the laptop;
• turn on the laptop and wait about a second. 20-30;
• turn off the laptop.

Now you can connect the RAM, hard drive and battery.

Contacts that need to be closed to reset the BIOS settings. Usually these contacts are labeled with the word CMOS.

ACER laptop bios has been reset.

We need to say a few words about the “pitfalls”:

• not all laptops will have two contacts, some will have three, and to reset you need to move the jumper from one position to another and wait a few minutes;
• instead of jumpers there may be a zero button: just press it with a pencil or pen and wait a few seconds;
• You can also reset the BIOS if you remove the battery from the battery for a while. motherboard laptop (battery looks like a tablet, small).

That's all for today. Don't forget your passwords!

Hello dear readers of my blog. In this article, I will most likely talk about preparing for installing Windows 7 on a Packard Bell EN LE639KB laptop, rather than the installation itself. So much has been written on the Internet about installing Windows 7.

Background

The other day, an acquaintance called me and asked me to look at the Packard Bell EN LE639KB laptop I had purchased. So to speak, evaluate the purchase, and install Windows 7 and necessary programs. Bring it, we'll check it out, we'll set it up - was my answer. The laptop looked nice, thin, and stylish. The filling is average for today's times: 4-core processor, 4 gigabytes of RAM, 320 screw and discrete video card. Good for work and play.

This is what the Linpus bootloader looks like
The most interesting thing about this laptop is the operating system. It is called Linux Linpus Lite version, and even in a console version. In general, you need to install something more familiar, namely Windows 7 64.

Linpus Command Line
Preparing to install Windows 7

We insert a flash drive with the Windows 7 installation distribution into the USB socket. How to choose to boot from a flash drive? On different computers and laptops differently. This could be the Esc, F2, F10, F11, F12 key. After trying all the keys and not achieving any results, I decided to go into the BIOS settings and look there. How to enter BIOS? There are no other inscriptions on the screen other than the beautiful Packard Bell logo. We will act using the brute force method or the “scientific poking” method. To enter the BIOS settings in our case, you need to hold down the F2 key when turning it on and hold it for a while.

Boot Menu disabled
The F12 Boot Menu function was disabled in the BIOS settings. Let's turn it on. Save the settings and reboot the laptop. We press F12, a boot media selection window appears, but the laptop’s hard drive is listed in first place and it is not possible to change its location. In addition, our bootable USB flash drive with Windows 7 is not on the list. What should we do? How to boot from our bootable USB flash drive with Windows 7? This question turned out to be the most difficult in our story about installing Windows 7 on a Packard Bell EN LE639KB laptop.

Boot Menu E
Boot Menu enabled
Solving the problem

After looking at more than one site on the Internet, collecting information bit by bit, and also using the “scientific poking” method, a solution to this issue was found. Namely, you need to change the UEFI parameter to Legasy in the BIOS settings. After that, our flash drive appeared in the boot media selection list and is available for selection. Select it as a download and continue installation in progress Windows 7. Problem solved.

Boot Mode UEFI
Moreover, when choosing a place Windows installations 7, you need to delete all partitions from the laptop’s hard drive and recreate the partition or partitions for Windows 7.

Boot Mode Legacy
It turned out that drivers for Windows 7 are supplied with the laptop on a disk. But I didn’t use them, but installed more recent drivers from the DriverPack Solution kit.

Selecting a flash drive with Windows 7 distribution
So, Windows 7 is installed on a Packard Bell EN LE639KB laptop, the owner of the laptop is happy, and I got another piece of experience. Everyone is glad and happy.

Next, you need to specify the user on whose behalf the recovery will be performed and enter a password for the selected user, if one has been set. Enter the required information and click OK. In the next menu, click “Recovery Management”. This will launch the Acer, eMachines or Packard Bell laptop recovery utility. There may be minor interface differences depending on the manufacturer. If you used the recovery option using the Alt+F10 key combination, the system recovery procedure will begin immediately from this menu. If you have previously saved all important data to external media, select “Restore factory settings” operating system" You will be warned about necessary measures precautions. To continue the procedure for restoring the laptop operating system, click “Next”. Then you will be shown information about the laptop's hard drive.

Packard bell system recovery

On the black screen that appears, select sequentially:

1. the “Run Recovery Center” option for Sony, or “Troubleshoot computer problems” for Toshiba, or “System Recovery” for HP;
2. menu item "Load Defaults BIOS".

Depending on the manufacturer, the name of the option may vary: “Load BIOS Setup Defaults”, “Load Safe-Fail Defaults”, but the words “Load” and “Default” will definitely be present. Preparation Prepare for a factory reset:

• Before you click on “Load Defaults BIOS”, save all the necessary information on removable media;
• Since the restore operation cannot be interrupted, connect the device to the network using network adapter nutrition;
• Please note that when returning to the original settings, all programs installed by the user after purchasing the device will be deleted.

How to restore a laptop to factory condition: acer, emachines and packard bell

Attention

Click Yes and then Start. The dialog box that appears contains information about the hard drive to which the operating system will be restored. Attention! If you continue with this procedure, all files on your hard drive will be deleted. 4. Click OK. Before the recovery begins, the computer will be rebooted, after which the files will be copied to the hard drive.

Info

This may take some time, but the Packard Bell Recovery Management window will show the progress of the process. Once the recovery is complete, you will be prompted to restart your computer.5. Click OK. The computer will restart. 6. Follow the on-screen instructions for initial system installation.

Recovering from a hard drive at boot time To reinstall Windows and all pre-installed programs and drivers, follow these steps:1.
Video: Factory settings of the laptop Where is Recovery located and its activation The hidden partition on the hard drive that stores all the files necessary to restore the system is called Recovery. It is created by default on all laptops, and is deleted or damaged in most cases as a result of incorrect user actions. See where it is hidden section, Can:

• in the Computer Management menu;
• Disk Management item.

There you can see the size that Recovery occupies on the HDD.
Typically this is 20-25 GB of system information and installation files. If you have a Toshiba laptop, then you have probably already noticed that on drive D there is a system folder called HDD Recovery. It also stores the information necessary to reset the system, so it cannot be deleted.

Instructions for returning a laptop to factory settings

Select a restore point, click Next, and then Finish. A confirmation window will appear. 4. Click Yes. The system will be restored using the specified restore point.

Important

The process may take several minutes and may require you to restart your computer when completed. Resetting the system to factory settings If you have problems with your computer that cannot be resolved by other means, you may need to reinstall all programs in order to return the system to factory settings. To reinstall, you can use your hard drive or pre-created recovery discs.

Attention! During full recovery all files on the hard drive are deleted and reinstalled Windows systems and all pre-installed programs and drivers. It is recommended to first create backups everyone important files, stored on the hard drive.

Bad request

Activating Recovery starts the process of resetting user BIOS changes, restoring factory settings, and reinstalling the OS and system programs and drivers. To activate Recovery, press a specific hotkey combination. This will allow you to enter the system menu, where you can select several system recovery options.

It should be remembered that each manufacturer has its own combination of hot keys; below we will look at the most popular ones. Restoring settings using hot keys In order to return the laptop to factory settings, you should remember several hot key combinations. When the system boots, you should press hot keys to access the BIOS Setup menu, from where you can start the process of restoring parameters.

How to restore a packard bell laptop to factory settings

Restoring a Packard Bell system is a typical question asked of professional sysdamins. Restoring the system on a Packard Bell laptop is not a very complicated procedure; you can do it in no time, without going to specialized workshops. The main thing is that you will get a unique chance to improve your skills, and besides, you can save a small amount and spend it on ice cream.

Packard Bell system recovery is necessary when the laptop starts to work too slowly or refuses to turn on at all. Such consequences can be caused by incorrect operation of programs, exposure to computer viruses etc. It is impossible to go through all the options, so we will immediately move on to a practical solution to this problem.

How to reset a Packard Bell laptop to factory settings

Turn on D2D Recovery, save the changes and reboot. Immediately after the reboot, click on the F8 key to bring up the next menu. Select the very first item, as noted in this example. After this, the downloading of special files and preparation for the important procedure will begin.
Next, we will need to enter the language settings and username. In the next menu “rehabilitation of a Packard Bell laptop”, select the latest Recovery function. Next, the main stage of our “laboratory work” will begin.

Select the option with factory settings. Of course, the program will warn us that all information will be erased and blah, blah, blah... Then a window will open with data about the hard drive partition. We check and move forward. Then another warning may pop up, click OK and watch as the laptop returns to its original state.
For every important event in the operating system, points are created here. Select the desired “moment” and click “Next” again. If in doubt, it is better to choose the “oldest” point. Packard Bell system recovery begins immediately after clicking “Finish”.
The last window displays the system partition for which recovery is available. The actual process will begin upon reboot. Please note that the computer will turn on very slowly. This indicates that the “rehabilitation” of the laptop was started even after the final Windows boot, a corresponding message will appear on the display. Safe Mode In a similar way, you can restore the Packard Bell system, even if the car does not turn on at all. This is exactly what “Safe Mode” was created for. If you still don’t know, then I’ll give you instructions. This is a special Windows startup mode that includes a minimum of programs and services.

There are several methods, which we will take a closer look at. The option to reset settings may be needed if:

• you experience frequent malfunctions of the installed operating system;
• the installed OS does not boot;
• you need to reset passwords for BIOS and OS (Windows);
• your laptop is “cluttered” with unnecessary computer programs, which often conflict with each other;
• you changed the BIOS settings, after which the device began to work incorrectly.

What are the factory settings? Factory parameters are set by the manufacturer for specific model computer or laptop. They store BIOS settings and computer configuration parameters.

When you turn on the computer, before the operating system starts loading, hold Alt and press the F10 key. If the recovery does not start, you need to activate the D2D Recovery option in the BIOS settings. You need to be aware that changing other BIOS settings may cause your laptop to malfunction.

If you have never worked with BIOS settings before and have a vague idea of ​​what it is, then it is better for you to run the system recovery environment in a longer, but more in a safe way, standard for many computer manufacturers. To do this, immediately after turning on the laptop, select a special boot mode for the operating system by pressing F8. The “More Boot Options” menu will appear on the screen. Select Troubleshoot your computer and press Enter.

The files will begin downloading. Then select your language settings and click Next.
Sometimes a computer owner is faced with the need to clean the system of various bugs that interfere with normal operation. This can be done by reinstalling the operating system, or using special utilities. But there is a method that has several undeniable advantages over them.

Resetting the settings to factory defaults will help restore the device to functionality in most cases, even if you cannot start the OS. This method is especially relevant for those who do not want to waste time reinstalling the OS. When restoring factory settings, the OS will be reinstalled automatically.

You will not need to enter the OS activation code again. That will be restored Windows version, which came with the laptop upon purchase. By rolling back the BIOS, you will eliminate the problems listed above. In this article we will look at how to return a laptop to factory settings and restore its functionality.

So, you need to boot from a flash drive or other device, for example, to install an operating system or scan the system for viruses. To resolve this issue, there are two options. For the first method, you first need to enter the BIOS, then go to the boot menu, and there set the device from which you want to boot the computer. The second method does not require entering the BIOS, you just need to call the boot menu directly, this is done by pressing keys when starting the computer.

Keys to enter BIOS and Boot Menu

Typically, the keys for entering the BIOS and Boot Menu (POST keys) are indicated at the initial stage of booting the computer; in the screenshot, these keys are indicated at the bottom of the screen.

In our case, to get to the boot menu you need to press a key, and to get to the BIOS you need to press a key.

BIOS entry keys for laptops and PCs

Manufacturer - BIOS - Hotkey.

Acer (Altos 600 Server) - ++ or
Acer (Aspire, Power, Veriton, Extensa, Ferrari, TravelMate, Altos) - or
Acer (Older PC) - or ++

AMI (American Megatrends AMIBIOS, AMI BIOS) -
AMI (American Megatrends AMIBIOS, AMI BIOS) - Old Version - or

Award BIOS (AwardBIOS) -
Award BIOS (AwardBIOS) - Old Version - ++

Compaq (Older Computers) - , or
Compaq (Presario, Prolinea, Deskpro, Systempro, Portable) - - at the moment the logo is displayed.
Compaq (Presario, Prolinea, Deskpro, Systempro, Portable) - - cursor in the upper right corner.

Dell (Older 486 Models) - ++
Dell (Older Laptop Models) - + or +
Dell (Some Models) - Reset - press the button twice
Dell (XPS, Dimension, Inspiron, Latitude. OptiPlex, Precision, Vostro) -
Dell Dimension L566cx System -

eMachine (Some Older Computers) -
eMachines (eMonster, eTower, eOne, S-Series, T-Series) - or

Gateway (Some Older PCs) -
Gateway Using Phoenix BIOS (DX, FX, One, GM, GT, GX, Profile, Astro)

Hewlett-Parkard (HP Alternative) - or
Hewlett-Parkard (HP Pavilion, TouchSmart, Vectra, OmniBook, Tablet) -
Hewlett-Parkard (HP) Tablet PC - or

IBM (Older Computers or Notebooks) -
IBM (PC, XT, AT) -
IBM ThinkPad using IBM BIOS (Early Models) - ++ - when the cursor is in the upper right corner.
IBM ThinkPad using IBM BIOS (Later Models) - - press and hold
IBM ThinkPad using Phoenix BIOS - ++ - from DOS command line

Lenovo (Older Products) - ++, ++ or +
Lenovo (ThinkPad, IdeaPad, 3000 Series, ThinkCentre, ThinkStation) - or

NEC (PowerMate, Versa, W-Series) -
NEC Versa Notebook - - press and hold.

Packard Bell (8900 Series, 9000 Series, Pulsar, Platinum, EasyNote, imedia, iextreme) - , or
Packard Bell (Early 386 and 486 Dodels) - ++[S] - sequentially.

Phoenix BIOS (Phoenix-Award BIOS) -
Phoenix BIOS (Phoenix-Award BIOS) - Old Version - ++[S], ++, ++ or +[S]

Sharp (Notebook Laptops, Actius UltraLite) -
Sharp (Old PCs) - Requires diagnostic disk to enter BIOS.

Sony (VAIO, PCG-Series, VGN-Series) - , or
Sony Vaio 320 Series -

Tandon - ++
Tandon 386 - ++

Toshiba (Portege, Satellite, Tecra with Phoenix BIOS) -
Toshiba (Portege, Satellite, Tecra) -

After pressing the keys, the BIOS system menu will open. The appearance of the BIOS system may differ depending on the manufacturer and BIOS version.

But every BIOS version has Boot menu(boot) This is exactly the parameter – Boot, which we need to find if we need to set it to boot from a flash drive, for example. Next, let's look at entering the boot menu without visiting BIOS.

Keys for calling up the boot menu on laptops and personal computers

At the beginning of the computer boot, you can see a key combination or key (POST hotkeys) by pressing which you will be taken to the boot menu directly bypassing visiting the BIOS. On some computers, Boot Menu hotkeys may be disabled by default in the BIOS. To be able to use hotkeys, you need to enable it in the BIOS settings. Opposite the F12 Boot Menu column you need to set the Enabled parameter.

Good afternoon.

Many problems on a laptop can be solved if you reset the BIOS settings to factory settings (sometimes they are also called optimal or safe).

In general, this is done quite easily, it will be more difficult if you set a password on the BIOS and when you turn on the laptop it will ask for this same password. There is no way around this without disassembling the laptop...

In this article I wanted to look at both options.

1. Reset laptop BIOS settings to factory settings

To enter the BIOS settings, the keys are usually used F2 or Delete(sometimes F10 key). It depends on the model of your laptop.

Finding out which button to press is quite easy: restart the laptop (or turn it on) and look at the first welcome window (it always indicates the button to enter the Bios settings). You can also use the documentation that came with the laptop upon purchase.

And so, we will assume that you have entered the Bios settings. Next we are interested in Exit tab. By the way, in laptops of different brands (ASUS, ACER, HP, SAMSUNG, LENOVO) the names of the Bios sections are almost the same, so there is no point in taking screenshots for each model...

Setting up BIOS on an ACER Packard Bell laptop.

Next, in the Exit section, select a line like " Load Setup Defaults" (i.e. loading default settings (or default settings)). Then, in a pop-up window, you will need to confirm that you want to reset the settings.

And all that remains is to exit the BIOS while saving the settings made: select Exit Saving Changes(first line, see screenshot below).

Load Setup Defaults - loading default settings. ACER Packard Bell.

By the way, in 99% of cases with the settings reset, the laptop will boot normally. But sometimes a small error occurs and the laptop cannot find where to boot from (i.e. from what device: flash drive, HDD, etc.).

To fix it, go to Bios again and go to the section Boot .

Here you need to change the tab Boot Mode :UEFI change to Legacy, then exit the Bios saving the settings. After rebooting, the laptop should boot normally from the hard drive.

Changing the Boot Mode function.

2. How to reset BIOS settings if it requires a password?

Now let's imagine a more serious situation: it happened that you set a password for the Bios, and now you have forgotten it (or your sister, brother, friend has set a password and is calling you for help...).

Turn on your laptop (in the example, an ACER laptop) and see the following.

ACER. The BIOS asks you to enter a password to use the laptop.

To all brute force attempts, the laptop responds with an error and after several incorrect passwords are entered, it simply turns off...

In this case, you cannot do without removing the back cover of the laptop.

You only need to do three things:

• disconnect the laptop from all devices and generally remove all cords that are connected to it (headphones, power cord, mouse, etc.);
• remove the battery;
• remove the cover protecting the RAM and hard drive of the laptop (the design of all laptops is different, sometimes you may need to remove the back cover completely).

Overturned laptop on the table. You need to remove: the battery, the HDD and RAM cover.

Laptop without battery, hard drive and RAM.

There are two contacts under the RAM strips (they are also signed JCMOS) - these are what we need. Now do the following:

• close these contacts with a screwdriver (and do not open them until you turn off the laptop. This requires patience and accuracy);
• connect the power cord to the laptop;
• turn on the laptop and wait about a second. 20-30;
• turn off the laptop.

Now you can connect the RAM, hard drive and battery.

Contacts that need to be closed to reset the BIOS settings. Usually these contacts are labeled with the word CMOS.

ACER laptop bios has been reset.

We need to say a few words about the “pitfalls”:

• not all laptops will have two contacts, some will have three, and to reset you need to move the jumper from one position to another and wait a few minutes;
• instead of jumpers there may be a zero button: just press it with a pencil or pen and wait a few seconds;
• You can also reset the Bios if you remove the battery from the laptop motherboard for a while (the battery looks like a tablet, small).

That's all for today. Don't forget your passwords!

Social buttons.

Let's look at this example to see how easy it is to configure the BIOS to boot from a flash drive or drive. And at the same time, we will also enable the boot selection option.

But everything is in order. This Packard Bell P5WS5 laptop model has a simple BIOS, without any UEFI or other bells and whistles.

Well, let's begin.

First we need to enter the BIOS. As always, enter using the "F2" key.

And here we see brief description laptop. Such as core frequency, connected devices (hard drive and drive), BIOS version.

But we are not interested in this.

And having admired the characteristics of the Packard Bell P5WS5 laptop, we go to the “Main” tab.

Here we enable the "F12 Boot Menu" option and don't touch anything else!

P.S.: Do not switch “Sata mode”; if you switch, your OS simply will not start. There will be an eternal reboot with code 7B.

Did you do as written above? Let's move on to the next tab "Boot".

This is where we see the connected devices. In this example, I set the priority for launching from a flash drive, but if the flash drive is not inserted, it will boot from the hard drive, etc.

The priority is set using the "F5" (lower) and "F6" (increase) keys.

Have you chosen what we will launch from? Then Press the "F10" key and a window will appear in front of us with the question: "Are you sure you want to save the settings?"

Naturally yes, select “Yes” and press “Enter”.

At this stage, we saved the settings of the given boot priorities and enabled the “Boot menu” option - in Russian words “Boot menu”.

To enter the boot menu, you need to press the "F12" key when turning it on (when the logo appears, in no case after, since the boot will occur).

The boot menu looks like this.

IN boot menu Just use the arrows to select what you want to boot from and press "Enter".

That's all for setting up the BIOS of a Packard Bell P5WS5 laptop to boot from a flash drive or drive and enabling the boot menu.

In this article I will tell you how to configure the BIOS on your laptop yourself Acer - Packard Bell ENTE11 to boot from a flash drive.

Create bootable USB flash drive, for installation Windows 7, 8, XP , you can do it yourself, using THIS instructions.

This may be necessary to reinstall the operating system, or to treat viruses by booting from a flash drive and running an antivirus.

Our first step will be to get into the BIOS.

To do this, turn on the laptop and immediately press the F2 key.

Having entered the BIOS, we find ourselves in a tab with brief information about the laptop.

Then go to the "Boot" tab and in the first item "Boot mode" select the "Legacy BIOS" mode.

Now go to the “Exit” tab and select the first item - exit with saving changes “Exit Saving Changes”.

If there is no flash drive or CD, booting will be done from the hard drive.

For greater clarity, you can watch a video on setting up the BIOS.

Video instructions By BIOS setup laptop Acer-Packard Bell ENTE11 to boot from the installation flash drive.