Resetting smart hdd. How to fix SMART error on hard drive or SSD
Equipped with a special self-diagnosis firmware S.M.A.R.T. (self-monitoring, analysis and reporting technology). This technology allows you to monitor the condition of the HDD, analyze its operation and predict failure. “SMART” monitors over 40 parameters, the result for each of which is entered into a special table. Analysis of S.M.A.R.T. statistics allows you to detect vulnerabilities and predict the exit hard drive out of order.
This article will tell you how to view the SMART of a hard drive, decipher its readings, and what parameters should be given special attention. It is worth noting that the information is presented in a structured manner, but special software is required to extract data from it.
How to view S.M.A.R.T. hard drive. Decoding parameters.
To check the “SMART” parameters, this function must be enabled in the system. This is true for computers manufactured before 2010. They have the HDD S.M.A.R.T option in the BIOS. Capability, the inclusion of which allows you to fully monitor “SMART”. On new PCs the question is “how to enable S.M.A.R.T. on your hard drive? not relevant – everything is enabled by default.
To view HDD status parameters, you need a special utility for working with HDD (Victoria, HD Tune, HDD Scan) or comprehensive diagnostic programs (Everest or its “successor” Aida64). They allow you to display the table in an easy to understand form.
Let's analyze the parameters using Victoria as an example. As you can see from the image, the hard drive (in this case a Seagate 200 GB with an outdated IDE interface) does not support all “SMART” commands and fixes some parameters.
In the table header you can see the parameter ID, its name, the values of VAL, Wrst, Tresh and Raw, as well as the Health evaluation column.
- ID – parameter number in the general list of analyzed criteria.
- VAL is its current value in abstract units (usually a percentage of the ideal value).
- Wrst is the worst value the hard drive has ever achieved.
- Tresh is a conditional threshold for the VAL value, upon reaching which the system notifies of the impending “death” of the HDD.
- RAW – expression of the VAL parameter in numerical format (number of operating hours/failures/errors/bugs).
The Health parameter allows you to assess the condition of the HDD for people unfamiliar with the intricacies of computer hardware or English. He assigns the usual score from 1 to 5 points to each of them.
When analyzing hard state disk, you should pay attention to VAL (comparing with the Tresh column) and RAW (for an objective assessment). In the above example, it can be seen that the hard drive has experienced many read errors (for Seagate, Fujitsu and Samsung you don’t have to look at this column - all errors are recorded here) and has a long operating time (parameter 9). The table shows that the number of hardware error corrections (parameter 195) is quite high. The remaining “SMART” values are normal or close to it. It is important that parameter 5 (Reallocated Sectors Count) is normal. This means that the number of bad sectors is small (11 in this case) and the disk itself is not in danger yet.
If parameter 5 has alarming values, the health of the HDD is at risk. In the above screenshot, the Reallocated Sectors Count graph indicates that the hard drive is close to failure. In this case, this is a system failure (the discrepancy between the zero RAW value and the critical VAL value indicates this), and SMART restoration of the hard drive is required to bring it back to normal. But usually such information indicates that the HDD is about to break down and can no longer be used normally.
How to reset or restore S.M.A.R.T. hard drive
We cannot tell you in detail how to reset the SMART hard drive. Although this action is not criminal (unlike changing the IMEI of a smartphone), it can help unscrupulous traders sell faulty hard drives under the guise of new ones. But for users who need to know how to restore the SMART hard drive in order to return it to operation after a software failure, we will explain the situation in general terms.
- To reset S.M.A.R.T. (just like other service tasks) a hard drive connection via the COM interface is required. To do this, manufacturers equip the HDD with a special connector of 4 or 5 pins. It is located next to the sockets for data cables and power supply. New computers often do not have a COM socket on the rear panel, so its functions are performed by a special USB-COM card.
Hard drive interface connectors
Threat name
Executable file name:
Threat type:
Affected OS:
Win32 (Windows XP, Windows Vista, Windows Seven, Windows 8)
Smart HDD infection method
Smart HDD copies its file(s) to yours hard drive. Typical file name .exe. Then it creates a startup key in the registry with a name and value .exe. You can also find it in the process list with the name .exe or.
If you have additional questions regarding Smart HDD, please fill out and we will contact you shortly.
Download the removal utility
Download this program and remove Smart HDD and .exe (download will start automatically):
* SpyHunter was developed by the American company EnigmaSoftware and is capable of removing Smart HDD in automatic mode. The program was tested on Windows XP, Windows Vista, Windows 7 and Windows 8.
Functions
The program is able to protect files and settings from malicious code.
The program can fix browser problems and protects browser settings.
Removal is guaranteed - if SpyHunter fails, free support is provided.
24/7 anti-virus support is included in the package.
Download the Smart HDD removal utility from the Russian company Security Stronghold
If you are not sure which files to delete, use our program Smart HDD removal utility.. The Smart HDD removal utility will find and completely remove all problems associated with the Smart HDD virus. Fast, easy-to-use Smart HDD Removal Tool will protect your computer from the Smart HDD threat that harms your computer and violates your privacy. Smart HDD Removal Utility scans your hard drives and registry and removes any manifestation of Smart HDD. Conventional antivirus software is powerless against malicious programs such as Smart HDD. Download this simplified removal tool specially designed to solve problems with Smart HDD and.exe (download will start automatically):
Functions
Deletes all files created by Smart HDD.
Removes all registry entries created by Smart HDD.
The program can fix browser problems.
Immunizes the system.
Removal is guaranteed - if the Utility fails, free support is provided.
24/7 antivirus support via GoToAssist is included in the package.
Our support team is ready to solve your problem with Smart HDD and remove Smart HDD right now!
Leave detailed description your problem with Smart HDD in the section. Our support team will contact you and provide you with step by step solution problems with Smart HDD. Please describe your problem as accurately as possible. This will help us provide you with the most effective method removal of Smart HDD.
How to remove Smart HDD manually
This problem can be resolved manually by deleting registry keys and files associated with the Smart HDD, removing it from the startup list and de-registering all associated DLL files. In addition, missing DLL files must be restored from the OS distribution if they were damaged.
To get rid of it, you need:
1. Terminate the following processes and delete the corresponding files:
Warning: you need to delete only files whose checksums are in the list of malicious ones. Your system may have necessary files with the same names. We recommend using this to solve the problem safely.
2. Delete the following folders:
3. Delete the following registry keys and/or values:
Warning: If registry key values are specified, you should delete only the specified values and leave the keys themselves intact. We recommend using this to solve the problem safely.
4. Reset browser settings
Sometimes it can affect your browser settings, such as replacing search and home page. We recommend that you use the free "Reset Browsers" feature in "Tools" in the program to reset all browsers at once. Please note that before this you need to delete all files, folders and registry keys belonging to the Smart HDD. To reset browser settings manually, use these instructions:
If you are using Windows XP, click Start, And Open. Enter the following in the field Open without quotes and press Enter: "inetcpl.cpl".
If you are using Windows 7 or Windows Vista, click Start. Enter the following in the field Search without quotes and press Enter: "inetcpl.cpl".
Select a tab Additionally
Under Reset settings Internet browser Explorer, click Reset. And click Reset again in the window that opens.
Select checkbox Delete personal settings to delete history, restore search and home page.
After Internet Explorer has completed the reset, click Close in the dialog box.
Warning: Reset browser settings V Tools
For Google Chrome
Find the folder Google installations Chrome at: C:\Users\"username"\AppData\Local\Google\Chrome\Application\User Data.
In a folder User Data, find the file Default and rename it to DefaultBackup.
Launch Google Chrome and it will be created new file Default.
Google Chrome settings reset
Warning: In case this doesn't work, use the free option. Reset browser settings V Tools
For Mozilla Firefox
Open Firefox
From the menu, select Help > Problem Solving Information.
Click the button Reset Firefox.
After Firefox finishes, it will show a window and create a folder on your desktop. Click Complete.
Warning: This way you will lose your passwords! We recommend using the free option Reset browser settings V Tools in the Stronghold AntiMalware program.
Surely many LG Smart TV owners have encountered such a problem as: “Not enough memory. Please reload the page or go to another site." This notification pops up on the TV screen at the moment when the user tries to open some multimedia file for viewing, and it does not matter whether the Internet connection is via cable or wireless connection. The thing is that the TV does not have enough memory to load multimedia content. At the same time this problem does not always arise, and not immediately. If there is insufficient memory, a corresponding notification pops up.
It is clear that this problem only occurs when your TV is connected to the Internet (everything is fine during normal channel viewing), and you use the TV’s built-in browser to watch any online video. When playing music or launching games, this error may also occur.
The problem is in no way tied to a specific site, i.e. The error message can pop up on any site. Moreover, this message about the problem does not always appear and not immediately. Suppose you watched multimedia content for about 10 minutes and suddenly everything is interrupted and a notification about low memory is displayed on the display. Reloading the page allows you to correct this situation, but most likely not for long - for a few minutes.
Memory Features
It turns out that there is no way to expand the device's memory. Memory card or more precisely external hard disk won't help here. Samsung TVs also have this problem. This situation occurs when you try to download a streaming video. The TV memory is full because... The image loads slower than online video and the required amount of memory simply does not always have time to be freed. It is recommended to open those sites in which the video in a common file is saved in blocks - then memory overflow does not occur.
There are not many options, because... You cannot expand the memory of a TV, as is the case with a computer. The only way out of this situation may be to install special applications on the TV that will allow you to get rid of this problem and watch movies, various videos, and listen to music from the Internet through them.
You can try updating your TV's software. There is hope that in later versions there will be no such “jambs” and memory will be used and distributed more correctly and more economically. After all, technology does not stand still, and this also applies to the development of the TV market. How can you clean the memory of an LG Smart TV easily and without problems?
Algorithm of actions:
- Connect the TV to the Internet, no matter how. Possible with using Wi-fi, modem or cable.
- Switch to Smart TV mode using the button on the remote control.
- A browser window will open; you need to select a tab in the upper right corner, which will have several lines.
- Select the line “Clear cache”. Click on the line and confirm this action and wait for the cleaning to complete.
TV capabilities
Using LG Smart TV, the user can open pages on the Internet, just like on a smartphone, laptop or desktop PC, using the browser built into the TV. “Surfing” the Internet using a remote control is not very convenient, although it is possible to purchase a keyboard for this purpose. But managing built-in Internet services using the remote control is very convenient, because they open instantly.
The range of these services available on smart TV depends on the country of residence of the owner and on the firmware version of the software. Usually this is Skype, Twitter, Facebook, YouTube, various TV channels. There is also access to multimedia resources.
Winchesters Seagate Barracuda very popular among users personal computers. Many discs last 5-10 years and have excellent “health” at this age. By the word “health” I mean both the functioning of the hard drive itself, its speed and stability, and the performance of its self-diagnosis and recovery system S.M.A.R.T.. Often, over many years of operation, the self-diagnosis system indicators S.M.A.R.T. change from the moment you start using the hard drive. In these indicators, the hard drive itself remembers such parameters as: the maximum temperature of the hard drive, the operating time of the hard drive (hours of operation), the number of turns on and off, the number of head parkings, etc. However, the most undesirable indicators that may appear after many years of hard drive operation are number of bad sectors.
Reasons for appearance bad sectors there are different ones. The main reason is time. Over time, areas with unstable reading of recorded information may appear on a disk, even of very high quality, especially if this information was recorded a very long time ago and the disk has not been used for a long time. Among the reasons may be the low quality of the hard drive platters themselves, poor-quality assembly, or the use of cheap materials in the manufacture of the HDD by the manufacturer.
However, there are times when bad sectors appear not because of the hard drive itself. I mean cases when the power is turned off while information is being written to the disk, or there is a defect in the SATA cable, or errors in SATA controller on motherboard computer, or unstable operation of the PC power supply (voltage surges along the 5V and 12V lines). In these cases, the self-diagnosis system can find on the surface of the hard drive from several pieces to several thousand so-called "software bads", i.e. areas where information cannot be read, because don't match checksums with the information itself that is recorded in these blocks. The diagnostic system often identifies them as unstable or bad and changes the system parameters S.M.A.R.T. not for the better. System S.M.A.R.T. It may even replace these blocks with good ones and display them in its indicators as Reallocated (moved), although the blocks themselves may be very good. This happens quite often, but not always.
The photo below shows a screenshot of the Victoria program with indicators S.M.A.R.T. problem disk. You can see more than a thousand sectors that have already been moved and hundreds that are preparing to move.
So what can we do to try to get the S.M.A.R.T numbers back? back to normal? We can reset the S.M.A.R.T. or transfer bad sectors to a hidden area of the self-diagnosis system, the so-called P (Slip) list. This operation does not guarantee that after resetting the indicators, these indicators will not appear again after a few days or weeks. If the disk really has bad sectors, the self-diagnosis system will identify them and mark them after using the disk for some time. So you most likely will not be able to make a “candy” out of a truly “dead” hard drive.
This guide outlines the procedure for resetting S.M.A.R.T. For hard drives Seagate Barracuda 7200.11, Seagate Barracuda 7200.12, Seagate Barracuda ES, Seagate Barracuda ES.2. On others hard drives Seagate Barracuda I haven't checked, maybe the procedure is similar.
First, we need to get an RS232-to-TTL adapter. You can assemble an adapter based on the MAX232 chip as shown in the diagram:
Note on the diagram: If it is possible to connect to a stabilized voltage of +5V, then the circuit can be simplified by removing the 7805 stabilizer with two capacitors from it.
Alternative RS232-to-TTL adapter circuit.
The TV's built-in browser is capable of storing all your actions, and when you use various services, the TV's memory becomes full.
As a result, the owner of the TV cannot use it for its intended purpose. To avoid such inconveniences, you need to figure out how to clear the memory on an LG Smart TV so that the TV’s functions are restored.
During its operation, the owner of the device can perform many different functions that are available thanks to the capabilities of the TV, for example:
- watch movies and listen to music;
- use Smart TV through a browser;
- viewing various files and photos;
- use a keyboard for ease of use of Internet content;
- manage TV applications.
All this leads to the accumulation of information in the internal storage device of the equipment, and as a result leads to the fact that there is not enough memory for further normal playback of various films and music on TV.
In this regard, periodic updating of the system is simply necessary to avoid overload.
Important: you should remember that this error occurs only if the Internet is connected to the TV; in the case when you watch channels in normal mode, such failures are excluded.
Failures can also occur when connecting to a computer, using a flash drive, or listening to music. At the same time, the occurrence of an error with information overload is in no way tied to any specific page. A corresponding message may appear when watching a movie or listening to music on any website, completely unexpectedly for the user.
You can reload the page, but this option will help for a few minutes, then the problem will make itself felt again.
At the same time, it is necessary to understand that it will not be possible to solve the current situation by increasing the memory, as can be done in the case of a computer.
A lot of smart technology faces such problems nowadays, since there is not yet a single constructive solution that would relieve the user of problems at the initial stages and solve the situation when it arises in one click.
For example, Samsung TV also faces a similar problem when there is a need to download streaming video. It experiences memory overflow due to slower image loading compared to online streaming.
I had to clean it. Therefore, to avoid the problem, it is recommended to use other applications only in those options where the video is posted in blocks.
How to clear memory on LG Smart TV
The occurrence of an error message indicates that the memory of the smart TV is overloaded; in order to cope with the temporary problem, you need to clear the cache in the lg smart TV browser.
This process is performed in 2 ways:
- Clear cache of all applications:
To do this, you need to press Smart on the remote control to open the main menu;
in one of the upper corners, depending on the version of the TV, use the “Change” button;
select one of the online services that is not used and click “Delete” in the window that opens. - Cleaning the browser only:
by pressing the same “Smart” button, switch to Smart TV mode;
launch the browser and open its settings in the upper right corner;
Select “Clear cache” from the drop-down list and confirm the action.
After some time, the memory cleaning will be completely completed, the image playback speed will be restored, and the memory will be freed of unnecessary content along with the full message.
If this does not happen, you need to reload the page or go to reboot the TV.
In addition, you can prevent the problem without cleaning by wisely using the functionality of the TV and connecting to Windows using special applications that will prevent the memory from being overloaded and will ensure comfortable viewing and listening to any content.
At the same time, you can connect to the Internet at any time via Wi-fi by setting up a router.
The problem cannot be solved in any other way, even LG service specialists cannot give a detailed answer to the question of how to clear the memory, since all options that apply to the computer are excluded here, only the use of special applications that block the oversaturation of memory with information is available.
You can, of course, try to update the software on the TV and hope that after the update the situation will be resolved in a favorable direction, but this option does not always work for long.
Conclusion
The TV's memory overflow occurs due to the use of online content or listening to music. Solving this problem is quite easy, and there are several options - cleaning the browser or applications, and the third option is the smart use of the TV's resources so that there is no memory overload.
Unfortunately, at the constructive level, this problem has not been solved by the developers at the moment, but one can hope that new versions of the technology will still get rid of it, since progress is in constant development.
Smart TV technology continues to actively develop on modern televisions. But still it is not without problems. Today we will talk about a problem that occurs on some models of LG TVs and not only. Its essence lies in the fact that when you, using the built-in browser of the TV, try to launch videos, music, or games online, an error pops up stating that there is not enough memory for this.
In general, not only owners of TVs with , it can also appear in equipment from other manufacturers. Although we will focus on LG products, owners of other TVs may also find this article useful.
In what cases can you encounter this error?
This error typical for the case when the TV is connected to the Internet, and using its browser you are trying to launch any online video (for example, on Youtube). Sometimes this error can also appear when trying to listen to music in the same way, or start a game (on VKontakte).
The error is in no way related to a specific site. Its appearance can occur on absolutely any resource. But the trick is that usually such a message does not appear immediately. You can watch a video for about ten minutes and then, suddenly, everything will be interrupted and a message will be displayed on the screen about lack of memory. The only way to fix this is to reload the page itself, and then continue watching for the next ten minutes.
Agree, this causes great discomfort! The error text itself may be displayed slightly differently in different cases. But in general, the meaning is always the same - there is not enough memory to perform this operation.
What can cause insufficient memory in the browser?
It turned out that the browser is not allocated too many resources and is not particularly designed for this.
But what can be done?
The answer from LG support tells the reason for this phenomenon, but does not show what can be done in such a situation.
We don’t have many options, because a TV cannot expand its memory, as it could with a computer. The only way to get rid of this error is to install special applications on your TV and watch videos from the Internet through them.
You can try to update the software for your TV. There is a possibility that more new version There is no such error and the TV memory is allocated more correctly.
And if you also encountered a similar problem and found a more original solution for it, then you can unsubscribe in the comments, telling your story
Sequence of actions in the presence of S.M.A.R.T. hard drive or SSD errors. How to fix a disk and recover lost data. When you boot your computer or laptop, S.M.A.R.T appears. Hard drive or SSD error? After this error, your computer does not work as before, and you are worried about the safety of your data? Don't know how to fix the error?
Relevant for OS: Windows 10, Windows 8.1, Windows Server 2012, Windows 8, Windows Home Server 2011, Windows 7 (Seven), Windows Small Business Server, Windows Server 2008, Windows Home Server, Windows Vista, Windows XP, Windows 2000, Windows NT.
What to do with a SMART error?
Step 1: Stop using the failed HDD
Receiving an error diagnosis message from the system does not mean that the disk has already failed. But if there is S.M.A.R.T. errors, you need to understand that the disk is already in the process of failure. Complete failure can occur within a few minutes or after a month or a year. But in any case, this means that you can no longer trust your data to such a drive.
You need to take care of the safety of your data, create backup copy or transfer files to another storage medium. Along with the safety of your data, it is necessary to take action to replace the hard drive. The hard drive on which the S.M.A.R.T. errors cannot be exploited - even if it does not completely fail, it can partially damage your data.
Of course, a hard drive can fail without S.M.A.R.T warnings. But this technology gives you the benefit of warning when a drive is about to fail.
Step 2: Recover deleted disk data
If a SMART error occurs, it is not always necessary to recover data from the disk. In case of an error, it is recommended to immediately create a copy of important data, since the disk may fail at any time. But there are errors in which it is no longer possible to copy data. In this case, you can use a recovery program hard data disk - Hetman Partition Recovery.
To do this:
- Download the program, install and run it.
- By default, the user will be prompted to use File Recovery Wizard. Pressing the button "Next", the program will prompt you to select the drive from which you want to recover files.
- Double-click on the failed disk and select the required analysis type. Choose "Full Analysis" and wait for the disk scanning process to complete.
- After the scanning process is completed, you will be provided with recovery files. Select the files you need and click the button "Restore".
- Select one of the suggested ways to save files. Do not save recovered files to a disk with an error.
Step 3: Scan the disk for bad sectors
Run a scan of all hard drive partitions and try to fix any errors found.
To do this, open the folder "This computer" and right-click on the disk with the SMART error. Select Properties / Service / Check in section Checking the disk for errors.
As a result of scanning, errors found on the disk can be corrected.
Step 4: Reduce disk temperature
Sometimes, the cause of the “S M A R T” error may be exceeding the maximum permissible operating temperature of the disk. This error can be resolved by improving the ventilation of the computer. First, check if your computer is equipped with sufficient ventilation and that all fans are working properly.
If you have identified and corrected a ventilation problem, after which the disk operating temperature has dropped to a normal level, then the SMART error may no longer occur.
Step 5:
Open the folder "This computer" and right-click on the disk with the error. Select Properties / Service / Optimize in section Disk optimization and defragmentation.
Select the drive you want to optimize and click Optimize.
Note. In Windows 10, disk defragmentation and optimization can be configured so that it occurs automatically.
Step 6: Buy a new hard drive
If you are faced with a SMART hard drive error, then purchasing a new drive is only a matter of time. What kind of hard drive you need depends on your style of working with a computer, as well as the purpose for which it is used.
What to look for when purchasing a new drive:
- Disk type: HDD, SSD or SSHD. Each type has its own pros and cons, which are not critical for some users and very important for others. The main ones are the speed of reading and writing information, volume and resistance to repeated overwriting.
- Size. There are two main drive form factors: 3.5 inches and 2.5 inches. The disk size is determined in accordance with the installation location of a particular computer or laptop.
- Interface. Main hard drive interfaces:
- SATA;
- IDE, ATAPI, ATA;
- SCSI;
- External drive (USB, FireWire, etc.).
- Specifications and performance:
- Capacity;
- Read and write speed;
- Memory buffer or cache size;
- Response time;
- Fault tolerance.
- S.M.A.R.T. The presence of this technology on the disk will help identify possible errors in its operation and prevent data loss in time.
- Equipment. This item includes the possible availability of interface or power cables, as well as warranty and service.
How to reset SMART error?
SMART errors can be easily reset in the BIOS (or UEFI). But the developers of all operating systems categorically do not recommend doing this. If the data on your hard drive is not valuable to you, then the SMART error output can be disabled.
To do this you need to do the following:
- Restart your computer, and by pressing the key combination indicated on the boot screen (they are different for different manufacturers, usually "F2" or "Del") go to BIOS (or UEFI).
- Go to: Advanced > SMART settings > SMART self test. Set value Disabled.
Note: The location of disabling the function is indicated approximately, since depending on the BIOS or UEFI version, the location of this setting may differ slightly.
Is HDD repair worthwhile?
It is important to understand that any of the methods for eliminating SMART errors is self-deception. It is impossible to completely eliminate the cause of the error, since the main reason for its occurrence is often physical wear and tear on the hard drive mechanism.
To eliminate or replace malfunctioning hard drive components, you can contact service center special laboratory for working with hard drives.
But the cost of work in this case will be higher than the cost of a new device. Therefore, it makes sense to perform repairs only if it is necessary to restore data from an already inoperative disk.
SMART error for SSD drive
Even if you have no complaints about your job SSD drive, its performance gradually decreases. The reason for this is the fact that the memory cells of an SSD disk have a limited number of rewrite cycles. The wear resistance feature minimizes this effect, but does not eliminate it completely.
SSD drives have their own specific SMART attributes that indicate the state of the drive's memory cells. For example, “209 Remaining Drive Life”, “231 SSD life left”, etc. These errors can occur if the performance of the cells decreases, and this means that the information stored in them may be damaged or lost.
In the event of failure, SSD disk cells cannot be restored and cannot be replaced.
Is the SMART error fixed? Leave feedback and ask your questions in the comments.
Threat name
Executable file name:
Threat type:
Affected OS:
Win32 (Windows XP, Windows Vista, Windows Seven, Windows 8)
Smart HDD infection method
Smart HDD copies its file(s) to your hard drive. Typical file name .exe. Then it creates a startup key in the registry with a name and value .exe. You can also find it in the process list with the name .exe or .
If you have additional questions regarding Smart HDD, please fill out and we will contact you shortly.
Download the removal utility
Download this program and remove Smart HDD and .exe (download will start automatically):
* SpyHunter was developed by the American company EnigmaSoftware and is capable of removing Smart HDD automatically. The program was tested on Windows XP, Windows Vista, Windows 7 and Windows 8.
Functions
The program is able to protect files and settings from malicious code.
The program can fix browser problems and protects browser settings.
Removal is guaranteed - if SpyHunter fails, free support is provided.
24/7 anti-virus support is included in the package.
Download the Smart HDD removal utility from the Russian company Security Stronghold
If you are not sure which files to delete, use our program Smart HDD removal utility.. The Smart HDD removal utility will find and completely remove all problems associated with the Smart HDD virus. Fast, easy-to-use Smart HDD Removal Tool will protect your computer from the Smart HDD threat that harms your computer and violates your privacy. Smart HDD Removal Utility scans your hard drives and registry and removes any manifestation of Smart HDD. Conventional antivirus software is powerless against malicious programs such as Smart HDD. Download this simplified removal tool specially designed to solve problems with Smart HDD and.exe (download will start automatically):
Functions
Deletes all files created by Smart HDD.
Removes all registry entries created by Smart HDD.
The program can fix browser problems.
Immunizes the system.
Removal is guaranteed - if the Utility fails, free support is provided.
24/7 antivirus support via GoToAssist is included in the package.
Our support team is ready to solve your problem with Smart HDD and remove Smart HDD right now!
Leave a detailed description of your problem with Smart HDD in the section. Our support team will contact you and provide you with a step-by-step solution to your Smart HDD problem. Please describe your problem as accurately as possible. This will help us provide you with the most effective Smart HDD removal method.
How to remove Smart HDD manually
This problem can be resolved manually by deleting registry keys and files associated with the Smart HDD, removing it from the startup list and de-registering all associated DLL files. In addition, missing DLL files must be restored from the OS distribution if they were damaged.
To get rid of it, you need:
1. Terminate the following processes and delete the corresponding files:
Warning: you need to delete only files whose checksums are in the list of malicious ones. There may be files with the same names on your system. We recommend using this to solve the problem safely.
2. Delete the following folders:
3. Delete the following registry keys and/or values:
Warning: If registry key values are specified, you should delete only the specified values and leave the keys themselves intact. We recommend using this to solve the problem safely.
4. Reset browser settings
Sometimes it can affect your browser settings, such as changing your search and home page. We recommend that you use the free "Reset Browsers" feature in "Tools" in the program to reset all browsers at once. Please note that before this you need to delete all files, folders and registry keys belonging to the Smart HDD. To reset browser settings manually, use these instructions:
For Internet Explorer
If you are using Windows XP, click Start, And Open. Enter the following in the field Open without quotes and press Enter: "inetcpl.cpl".
If you are using Windows 7 or Windows Vista, click Start. Enter the following in the field Search without quotes and press Enter: "inetcpl.cpl".
Select a tab Additionally
Under Resetting Internet Explorer browser settings, click Reset. And click Reset again in the window that opens.
Select checkbox Remove personal settings to delete history, restore search and home page.
After Internet Explorer has completed the reset, click Close in the dialog box.
Warning: Reset browser settings V Tools
For Google Chrome
Locate your Google Chrome installation folder at: C:\Users\"username"\AppData\Local\Google\Chrome\Application\User Data.
In a folder User Data, find the file Default and rename it to DefaultBackup.
Launch Google Chrome and a new file will be created Default.
Google Chrome settings reset
Warning: In case this doesn't work, use the free option. Reset browser settings V Tools in the Spyhunter Remediation Tool program.
For Mozilla Firefox
Open Firefox
From the menu, select Help > Problem Solving Information.
Click the button Reset Firefox.
After Firefox finishes, it will show a window and create a folder on your desktop. Click Complete.
Warning: This way you will lose your passwords! We recommend using the free option Reset browser settings V Tools in the Spyhunter Remediation Tool program.
Without a doubt, owners of LG TVs have faced the problem of lack of memory. An error code appears on the screen as soon as the user tries to play any media content. Moreover, regardless of the type of Internet connection: cable or wireless.
How to clear the memory on an LG TV, thereby restoring the correct operation of Smart TV? There are several proven methods, which we will now discuss. If you have an error on your LG TV "Not enough memory", you first need to determine what caused the software failure.
Causes of a memory full error
Not surprisingly, the alert software glitch lights up on the TV screen only when you connect to the Internet. That is, standard television viewing will be available. The TV's built-in browser is used to play multimedia content. Sometimes an error appears when you try to start an audio track or enter a game.
Please remember that the occurrence of this error is in no way related to incorrect work a specific website. In addition, the software failure code may not appear immediately. For example, you first started a video, but after a few minutes it is interrupted and a notification appears on the LG Smart TV screen stating that the TV does not have enough memory.
The error appears when the user tries to play a streaming video. Gradually free space There are fewer temporary files to store, which means the image will take much longer to load. To avoid software failures, try to use web portals where files are saved in blocks. As a result, it will be possible to avoid cache overflow in Smart TV.
There are several ways to solve the problem. As noted earlier, expand internal memory impossible. Therefore, it is necessary to install additional software, which will prevent the error from occurring. As a result, the content will be played through such programs.
The second method is to update WebOS ( operating system smart TV). It is possible that such glitches will be fixed in later versions. Because the software is constantly being improved by the developers of the equipment manufacturer.
How to clear cache
The system requires the user to clear the cache to reduce the load on RAM. However, it is absolutely not necessary to delete temporary files of absolutely all applications; it will be enough to clear the cache of the browser you are using.
Remember that deleting temporary files of absolutely all applications will cause the settings in them to be reset to default settings. You will need to sign in to your account again.
How to clear memory on LG TV? All you need is a remote control remote control. Follow the simple step-by-step instructions:
- First you need to go to the main menu of Smart TV. To do this, press the “Smart” button on the remote control.
- On the right or left (depending on the version of the installed OS), click on the “Change” button.
- Select the software you are using and click on the “Uninstall” command that appears in the window that opens.
This is how you clean the memory of your LG TV. Consequently, temporary files of absolutely all applications will be deleted.
If you would prefer to clear the cache exclusively of the built-in browser that you use directly to play content, then follow these step-by-step instructions:
- Click on the "Smart" button to switch to Smart TV mode.
- Launch the built-in browser, and then in the right corner click on the settings menu icon.
- Select a team "Clear cache", and then confirm the action again.
After a short period of time, the files saved by the browser will still be deleted. After the cleaning is complete, absolutely all videos and audio will begin to play correctly, and the error will disappear. It is advisable to reboot the TV immediately after cleaning.
Uninstalling apps
Not only temporary files are saved to the internal memory, but also applications installed by the user. Therefore, sometimes, in order to free up space, you have to delete applications from Smart TV that you do not use. You can do this in 2 ways.
How to clear the memory of an LG Smart TV? First, hover over the app you want to delete, then you need to open context menu and select a team "Delete". Confirm the uninstallation again. This is how games, movies, various widgets and all kinds of programs are removed.
In addition, there are other ways to delete applications. Open the directory "My Applications" and then transfer unnecessary files to the right corner of the screen until uninstallation begins. To complete the process, just confirm the action.
