How to set up wifi from computer to phone. Connecting a smartphone to a PC using Wi-Fi on iOS
Internet via a mobile phone or smartphone that supports 2G and/or 3G communication technology can be configured on the user’s computer.
Let's consider everything available methods such settings.
Connect your PC to the Internet via a smartphone (Wi Fi hotspot)
If you use your PC and urgently need access to the Internet, but you don’t have a cable or router at hand, you can set up your smartphone as an access point.
It will work like a router and you can connect to it from your computer.
Follow the instructions below to connect your laptop or PC to your smartphone with mobile internet:
- Enable the wireless network in your computer's settings;
- Now go to the settings of your smartphone or tablet;
- Select menu wireless network and then the “access point” item. In earlier versions of Android, click on the item “Modem and router mode”;
- In the window that opens, click on router settings;
- In the window that opens, create a name for the access point (any) and a password (minimum 8 characters). Click save and then move the slider that turns on the hotspot;
- Now from your PC, connect to your mobile router just like you would to any other wifi router.
Connecting a smartphone to a computer as a modem
To connect, you must have a USB cable (to connect your smartphone to your PC).
Follow the instructions:
- Immediately after connecting the smartphone, a dialog box appears on its screen asking you to select a connection mode. Ignore this window and close it;
- Go to the main menu of the device and then go to the phone settings;
- Open the USB modem setup window and set it to “Enabled” mode, as shown in the figure;
- After enabling modem mode on your smartphone, the computer will automatically begin installing the necessary driver software. Several dialog boxes will appear during the driver installation process.
The user must check permission for subsequent connections to the modem, and also indicate desired type connection networks); - After installing the driver, the PC will be connected to the network. A network connection icon will appear in the notification area of your operating system.
Pay attention! Computers with older versions of the operating system, for example,WindowsXP/Vista cannot automatically start installing the necessary drivers. In this case, you need to download the software from the official website of the smartphone manufacturer.
To make your Internet connection faster, in the settings mobile internet smartphone, select 3G connection technology.
Internet access from a computer via a regular cell phone
You can go online from your computer by connecting to it the most common cell phone.
There are several requirements for a mobile phone:
- it must support 3G, GPRS or EDGE connection technology,
- presence of a phone driver installed on the PC,
- SIM card with configured Internet and funds in the account,
- also needed USB cord to connect your cell phone to your PC.
Follow the instructions to find out how to connect the Internet on your computer via your mobile phone:
- Install the modem driver to personal computer. You can download it from the website of the mobile device manufacturer;
- After installing the driver, you need to initialize the modem. To do this, connect your mobile to your PC and open the device manager;
- In the modems tab, select cell phone, right-click on it and open the properties tab, then find the field additional parameters initialization and write the following line in this field: AT+CGDCONT=1,"IP","active". Click OK;
- Now you need to create a connection. Open Network Management window and shared access and select create new network, as shown in the figure below;
- Enter the dial-up number in the window that opens (usually *9**#, the number must be checked with the operator mobile communications);
- Enter the information you received from the operator in the window shown in the screenshot below and click on the Create button.
Everyone knows that connect your phone to your computer possible by USB cable. And it doesn’t matter whether it’s Android or Apple - the difference is in the methods of transferring files, and not in principle. However, there is another opportunity to download files from a smartphone to a computer and vice versa without a cable - via WiFi.
To do this, we will use one universal program for connecting your phone to a computer, which is available for both Android and iOS - WiFly.
In order to connect your smartphone to your computer via WiFi, you must have a home local network configured through a router, to which all devices will be connected, between which files will be exchanged. By the way, you can exchange data not only with a computer, but also with another tablet.
Method 1 - QR code
So, install the WiFly program on your phone or tablet and launch it. On the first page we will be asked to go to wifly.me on the computer and receive a QR code, which we can then scan with our phone and thereby gain access to it.
Let's do this:
- go to the site
- press the “Scan” button on your phone
- and scan the QR code from the monitor screen
After this, a page with folders and files contained on the smartphone will open on your computer.
Method 2 - IP address
However, it happens that this site is not accessible and there is simply nowhere to scan the code to connect a smartphone through a computer. In this case we will go a different way.
Click on the “Advanced” button (on iPad).
Or go to the tab with the icon in the form of a student's cap, if you have Android.
A new window will open in which information will be provided to connect the computer to the smartphone via WiFi network- this is its IP address and port, as well as access data via FTP client.
Open a browser on your computer and go to the specified IP address. In my case it is http://192.168.1.2:4885.
And we see the same result as in the first method - files and folders on the smartphone, depending on whether you have full access to your phone and what OS is installed on it. In the event that your smartphone is without Root is right or without jailbreak, if we are talking about iPhone, then it will appear empty window, and you will only have the opportunity to add files from the photo and video archive here. If you have full access to the smartphone system, then you will immediately display all the folders present on it and you can add absolutely any documents to the program.
Adding files to the program
As you already understand, on a hacked device, all files will automatically be at your fingertips. But on a smartphone and tablet that has a closed system, such as an iPad or iPhone, you will have to add documents for exchange manually. To do this, in the lower menu, switch to the tab with the folder icon. And click on the plus button.
We add files from our media library here, after which they will also appear in the browser on the computer.
Transfer files between phone and PC
So, we have the documents, now let's try to transfer them between devices.
Connecting a computer to a phone via FTP
Let's consider another option for connecting your phone to a computer - through an FTP client. To do this, you need to install the appropriate program on your PC, for example, the free FileZilla. We enter into it the connection data provided at the very beginning - address ftp server, login and password.
We connect and get the opportunity to transfer files back and forth directly.
Even though it's common now computer literacy, yet not everyone can solve many difficulties with technology. If you are interested in how to connect your phone to a computer via WiFi, then you should read the information in this article.
This procedure is simple. The main thing is that there is a WiFi module available. If it is on your computer, then you can connect other devices to it, for example, a tablet, smartphone or laptop.
Definition
What is WiFi? This is a wireless system that provides access to the Internet. It uses radio channels to transmit data. But for this system to work, an access point is needed. In homes for this purpose, a router is often installed, which provides constant access to the Global Network within the premises.
WiFi is considered a convenient feature, because thanks to it you can use the network from several devices, and not from one, as happens with wired Internet.
Where to start?
Before you find out via WiFi, you should understand what such a Network will be used for, since different methods are used to routinely synchronize a mobile phone with a PC and gain access to the Internet. Last method is more complex. But using simple tips, you can achieve your goals.
The easiest option
When the user has a modern laptop and smartphone, connecting devices is easy and simple. To do this, you need to perform several steps:
- Enable the WiFi function on your computer.
- Activate the wireless search option.
- When your phone indicates a laptop, “exchange” pins.
But this method will not work if the computer does not have the appropriate drivers. To eliminate this drawback, you need to install the software on your laptop. For example, after the AirDroid program assigns an IP address to your smartphone, you should enter it in the address field of the computer. This completes the synchronization.
Sending data when you need to send information to a PC may raise the question of how to connect your phone to your computer via WiFi. And the above method can be used if you need to save multimedia or digital files in the phone’s memory on the hard drive.
When copying the phone book to hard drive It will not be possible to find out the contents of the container. For this you need special program, the use of which will more fully answer the question of how to connect your phone to a computer via WiFi.
Unlimited Internet
To use wireless technology WiFi, there are 2 options. According to the first, connection to the Network occurs regardless of the router, which is recognized as an access point. If you need to use the second method, then computer hardware is used for this.
Using a router
How to connect your phone to your computer via WiFi for the Internet? To do this, special software is used, which must first be downloaded to your smartphone. Only the operating system must be Android. If it is different, then installation of third-party software is required.
As an example, you can take “ES Explorer”. This program is considered free, it is installed through the Play Market:
- Once the installation is complete, you need to find the LAN section.
- Then you should load the SCAN function.
- Then find a local PC.
- Click the “Create” button.
- And be sure to set the connection parameters.
After this, the user can view files and recordings located in the phone's memory. On a PC you can perform other actions - use computer folders on mobile device. It should be noted that this is very convenient service when, for example, there is one computer in a family.
Other things to consider
Before connecting, the user needs to configure the local network in advance: enable the network discovery option for different network profiles. You must check the box automatic configuration, and also disable password protection.
There should be no restrictions on smartphone folders. They must be removed so that they can be used freely. If a network is detected, but pages on the network do not open, this most often indicates that the device is not configured correctly.
In general, having a router in the room allows you to use the Internet on any device. You just need to configure them correctly and connect them.
Another method
How to connect your phone to your computer via WiFi without a router? You need to download the VirtualRouter Plus system. When it is opened, you should indicate the connection name, enter the password and working network.
The user needs to click the Start Virtual button. After this, he will have access to the Internet, since the laptop will serve as a router. But for this, the computer must be connected to the network using a cord.
Conclusion
After familiarizing yourself with the listed methods, you will understand how to connect your phone to your computer via WiFi. Windows 7 and other versions of the operating system can work using both methods. And thanks to this, users will have access to the Internet on two devices.
If to connect to a point Wi-Fi access, created using mobile phone, you will be using a computer, make sure that it has a Wi-Fi network card or an appropriate USB module for connecting to wireless networks. If you don't have the necessary equipment, your computer won't be able to connect to the hotspot, so you'll need to purchase one of the devices to use Wi-Fi. After purchasing the module, install it into the USB port of your computer and install the driver by inserting the disk with software, which comes with the device.
If you purchased network card Wi-Fi, insert it into the appropriate PCI slot on motherboard computer, and then install the drivers from the included disk. If all settings have been made correctly, you will see the corresponding icon, similar to the mobile signal reception level indicator on your phone. To use a laptop as a means of accessing the Internet, you do not need to additional settings, since most devices initially have the necessary Wi-Fi module.
Phone setup
To create a Wi-Fi hotspot from your Android phone, go to Settings - Modem Mode. Some devices on this operating system The menu item may be called “Wi-Fi Access Point”. Go to the “Access point settings” section to change the password and set the name of the future network. Then check the box next to “Wi-Fi access point” and wait for the connection to be created. A similar menu is available on iPhone and iPad devices in the “Settings” - “Modem Mode” section. To create a connection in devices on Windows Phone go to “Settings” - “ Shared Internet" and switch the slider to the "Enabled" position.
Connection
On your computer screen, click on the signal strength indicator, which is located in the lower right corner of the Start panel. From the options provided, select your phone's name or the name you assigned to your access point. Enter the specified password and click “OK”. The connection will be completed within a few seconds and you will be able to use your network connection. If you can't navigate to the sites you need, check the mobile Internet connection (EDGE, 3G or 4G) on your phone. If necessary, try disabling and then re-enabling the hotspot on your phone to connect from your computer again.
For those people who are alien to cluttering their workspace with wires, and who prefer wireless mice and keyboards, we will now reveal an option on how to connect the phone to the computer using Wi-Fi, so that it is possible to transfer files between gadgets.
Transfer files between Android and PC
We will consider this option on - devices. For example, to connect a smartphone to a laptop using Wi-Fi, you need to make sure that all devices are connected to the required wireless network, for example, to the same router.
Some explanations (not everyone knows this). Your Internet provider has installed a cable to you, through which you receive Internet. This cable connects to the computer and you are online. But you can connect this cable to a router - a device that emits a radio signal with packets (in other words, distributes the Internet) into space. This is what it looks like. And now you can catch this signal (usually within the apartment) with various devices: laptop, smartphone, TV, etc.
Next, you need to use the file manager in your smartphone “ES Explorer”, which has a lot of necessary functions, including the function of connecting the smartphone to a PC via Wi-Fi. The ES Explorer application can be downloaded absolutely free from the Play Market. 
Let's take a step-by-step look at how to connect a phone and a computer via Wi-Fi, what manipulations need to be done on the smartphone, and what on the computer.
Attention!
Nowadays there are a lot of smartphones and everyone has them different versions Android, so the steps described below may differ greatly, but the main thing remains is to install the “ES Explorer” application on your smartphone and turn on the network.
On your phone you need to do the following:
— connect to the router, as well as the computer;
For example, on your smartphone, click “Settings”. 
Next WI-FI 
And then select the desired router (in the picture you can see different routers - that is, the neighbors also have them turned on)
That. The smartphone is connected to the router under the name foxbat.
— activate the “ES Explorer” application;
— in the main menu of the program, make a “swipe” (sliding your finger across the smartphone screen) from left to right, so that the auxiliary menu appears;
— find the “Network” section;
- click on “Remote access”.
For example, on my phone it is done like this:
In “ES Explorer” click settings (three sticks). 
A screen opens and in the “Network” section, select “Remote Access”. 
If all the necessary manipulations have been performed correctly, a new window appears with the “Enable” button, you need to click on it. 
After clicking the “Enable” button, a line appears with the IP address (for example, ftp://192.168.0.52:3721/), you need to go to this address from your computer to your phone. 
We've sorted out the phone, let's move on to the computer.
On your computer you need to do the following:
- go to “Explorer” or “My Computer”;
— in the address bar (which is located at the top of the window) enter the IP address that was displayed on the smartphone (our example is ftp://192.168.0.52:3721/). Then you need to press the “Enter” key on your keyboard. 
After all these manipulations, the files and folders located on the phone will become available to us. We can remotely copy, play, move, rename and delete files located on the phone directly from the computer. 
For all subsequent computer connections to the phone, this IP address will be saved unchanged. Thanks to this, for greater convenience, you can make a bookmark with it on your computer (when using a browser) or a shortcut on the desktop (when using Windows Explorer), because you don’t want to point your finger at the keyboard every time you type the IP address manually.
As you have seen, there is nothing complicated about connecting a computer and phone via Wi-Fi. On the contrary, all these actions turned out to be quite simple and quick. Now you can transfer your valuable files between devices at high speed and without any wires.
With this we have completed our task. Now you can teach this to all your friends and acquaintances...
