How to put ipad into recovery mode. Recovery mode on Apple mobile devices

Like any operating system, Android has a special boot mode when the device turns on, but the system itself does not boot. This mode is called Recovery Mode, or recovery mode in Russian. This mode is present in any Android device and allows you to reset parameters, change firmware, restore firmware from a backup, or simply in case of a freeze. It is noteworthy that, unlike root rights, using Recovery Mode is not dangerous, and therefore is not blocked by the developer in any way. This function can be used by absolutely everyone and completely officially. Let's take a closer look at how to enter recovery on any device running Android, and what each menu item is responsible for.

Recovery Mode provides access to the system functions of the device

Ways to enter Recovery mode

On the device itself

Standard method. The principle of entering Recovery Mode is the same for all devices - when you turn it on, you need to hold down several buttons. Most often this is volume up, but the following options may also occur:

• Samsung - power on + volume up + Home.
• LG - power on + volume down.
• Google Nexus, HTC - power on + volume down, then tap Recovery.
• Certain Lenovo, Motorola models - power on + volume up + “Home”.
• Sony - power button, after double vibration, hold down the volume up.

If for some reason you cannot enter Recovery Mode using standard means, try checking the instructions. The listed combinations are valid in almost all cases and will work both to enter the standard recovery menu and the custom one. In addition, you can run it even when the tablet does not boot or the system freezes.

If you have root rights you will need installed application Terminal Emulator (https://play.google.com/store/apps/details?id=jackpal.androidterm). After installation, you will need to enable superuser rights and enter two commands: first su and then reboot recovery. The device will reboot.

Via computer

A prerequisite is that USB debugging mode is enabled (Settings - For developers - USB debugging, or select the appropriate item when connecting to a PC). Therefore, if this mode was previously disabled, the tablet will not start and you will not be able to use it.

You will need the ADB Run program (http://cloud-androidp1.in/Android/PC/Project_Site/AdbProgramm/), a cable and a working device.

1. Connect your device to your computer.
2. Launch the ADB Run program.
3. In the program menu, press 4 and then 3 in sequence.

The device will reboot into Recovery Mode. You can perform the procedures you need.

How to use Recovery Mode

As we have already said, there is both a standard recovery and a custom or custom one. Many experienced users claim that the capabilities of the first one are quite scarce, so it is better to install the unofficial one. We'll talk about them a little later, but now let's look at what Recovery Mode menu items you can find on your device.

Install zip from sdcard - installation of an archive with updates saved to a memory card. Through this menu, root rights are obtained and the firmware is installed.

Wipe data/factory reset - wipe data/reset settings to factory settings - completely clear the system partition, reset all settings to their original state. All apps and settings will be removed, but your media files will remain intact. Used for critical errors, system failures, or when new firmware is being updated. Especially effective remedy in cases where the device does not turn on.

Wipe cache partition - clearing the system cache - the system partition in which temporary files and all program settings are stored. It is recommended to do this when the firmware is changed.

Backup and restore - backup systems and restoration from previously created backups.

Mounts and storage - for correct operation, all sections of the system must be correctly mounted and connected. Often, this procedure is performed automatically, but sometimes something has to be corrected manually. You can also clear one of the partitions. We advise you to use this method only in case of specific need, otherwise file system will not boot and the tablet will not work.

Advanced - additional settings, including rebooting Recovery Mode, clearing the dalvik cache, resetting system application permissions. Most often used by professional programmers.

Management, unless otherwise indicated, is carried out through (moving through the list) and power (selecting a menu item). In some cases, selecting is done with the volume up, and scrolling is done with the volume down. In any case, the system must indicate exactly how to manage menu sections. There are designs with touch control.

Unofficial Recovery

As mentioned above, the standard Recovery Mode very often has somewhat limited capabilities, so it is best to use third-party, unofficial developments. The most popular are two of them - ClockworkMod recovery (abbreviated CWM) and TeamWin Recovery Project (abbreviated TWRP). Both developments have excellent functionality and allow you to very quickly and conveniently modify or change the firmware, get root rights, reset settings to factory settings or restore backup copy.

Among many brands cell phones one of the most popular is still Apple. This company has long established itself as a reliable and quality manufacturer, and not just cell phones, but high-tech devices.

It should be noted that popularity and mass production make this brand increasingly vulnerable to malware. And each new model already contains one or another flaw.

Therefore, users increasingly have to learn how to perform iPhone recovery mode.

What is Recovery mode and why is it needed?

Any manufacturer's phone has a special menu that allows you to restore factory settings. The function may be required when problems arise with the device and you need to return it to normal operation.

On devices that use iOS, the recovery mode is called Recovery mode. Not only the iPhone, but also the iPad and iPod have this capability.

This mode will help the device if a problem occurs in the program. If any glitches occur, a factory reset will be able to restore the phone to normal functioning. The advantage of such a recovery is that when using it, the warranty obligations manufacturer.

How to activate recovery mode

Recovery on all devices, including Apple, is launched using buttons. In the case of the iPhone, the choice of button set is small. Touch phones When freezes occur, they can drive the user into a stupor. After all, on the one hand, the absence of many buttons and manipulation only using the sensor is convenient, but on the other hand, if problems arise, there is a misunderstanding of where to press.

Therefore, it is better to familiarize yourself with the correct entry of the phone into recovery mode:

How to disable recovery mode

The user needs to remember that it is required not only to correctly enter Recovery mode, but also to be able to exit it.

This can be done in several ways:

1. When the iTunes icon and cable image appear on the screen, you need to hold down 2 buttons: “Home” and “Power”. You need to keep them in this state for about 10-15 seconds. Then turn on the phone using “Power”.
2. The method may not help if the user is in the “Recovery loop” mode. Then installation will be required special programs to exit Recovery mode. These could be programs such as TinyUmbrella, redsn0w, RecBoot.

What is a recovery loop

Recovery loop is iPhone condition, in which, after a forced reboot, the phone does not start working normally, but continues to show the user a black screen with the iTunes logo and a cable image. The reason for such a hit may lie in an erroneous iOS recovery or software glitch. This could also be a situation where, when changing software The cable was accidentally pulled out. You can get out of this state using the special programs described above.

For example, to get out of a loop using TinyUmbrella, you would:

1. Connect your phone to your computer via a USB cable.
2. Start launching the TinyUmbrella program.
3. Put your phone into DFU mode.
4. Click “Fix Recovery” in the program.
5. The phone should turn off and on on its own.

With redsn0w:

Using RecBoot:

1. After connecting the smartphone stuck in the loop to the computer, the RecBoot program is launched on the latter.
2. Having carried out recognition mobile phone, in the program you need to select “Exit Recovery”.
3. The device should reboot normally.

Sometimes programs are powerless. Therefore, you will have to restore the phone using firmware. It's important to remember to make backups to ensure you have the data you need.

What are the differences between DFU mode and recovery mode?

When it is not possible to restore a smartphone using the listed methods, DFU is used.

The disadvantages of this method are:

• update operating system iOS (although this may be a plus for some users);
• All user data will be deleted from the device (this is why it is so important to create backup copies of the phone - you can avoid this problem if something goes wrong with the device).

After connecting the device to the computer, you must turn off the phone. For 10 seconds, you should hold down 2 buttons: “Power” and “Home”. Then “Power” must be released, and “Home” must continue to be held. You must wait until the computer detects the device.

To enter the phone into DFU mode, it must be connected to the computer. iTunes identifies DFU as a recovery mode. But the computer reflects the device in DFU mode as a firmware update for the device.

You can remove the phone from DFU mode using a “cold restart”. It is performed using the same keys - “Power” and “Home” - within 10 seconds. Then you need to quickly press the “Power” button. The result should be the appearance of the Apple brand logo.

DFU mode - useful feature, which allows you to return the device to life in a variety of situations and failures. You can use it to restore or update iOS firmware, when it is impossible to perform manipulation in normal mode. In cases where the phone refuses to boot in normal mode, DFU is the way out.

Conclusion

Before you start using your phone, you must carefully study the instructions for use to avoid unnecessary damage caused by ignorance. In addition, when downloading any application from the Internet (including various toys), you should make sure that the download is safe for the device, that is, it will not bring any viruses with it.

If, nevertheless, the phone could not be saved and it freezes or constantly reboots on its own, then resetting the settings can return it to normal operation. If this does not help, then you should contact service center, because Perhaps the problem lies in the breakdown of some parts. In this case, the recovery mode is powerless - technical repairs will be required, which are best left to specialists.

There are times when, due to a firmware update via Wi-Fi or a system failure, your iPhone, iPod or iPad refuses to boot normally. If such a problem occurs, do not be upset, you can solve it yourself in almost any situation, if it arose at the software level - you only need to restore the firmware. On devices with operating system iOS update and restoring the firmware can be done simply by switching it to Recovery or DFU Mode.

In this article we will tell you what Recovery Mode is and how to enter and exit this mode. ABOUT DFU mode You can read in our article How to boot iPhone and iPad in DFU mode

Recovery Mode- this is a software mode for flashing the device, in which the main system files are not affected, only their integrity and recovery are checked, iOS settings and parameters are reset, and when updating, changes are made, if any.

If you see an image of a USB cable and the iTunes program icon on the device screen, then your gadget is in Recovery Mode. The device enters this mode as soon as you begin the process of updating or restoring iOS c using iTunes on the computer or put the iPhone and iPad into Recovery mode themselves.

How to enter Recovery Mode

You can put your iPhone, iPod or iPad into Recovery Mode from absolutely any state of the device.

Step 1 Turn off your iOS device. Pinch and hold Power button until a slider appears on the screen with the word Turn off, then drag it from left to right to turn off the device

Step 2 Click Hardware Home button and without releasing the button, connect the iPhone/iPod/iPad to the computer using a USB cable. An image with the iTunes icon and a USB cable will appear on the screen of your iOS device, indicating that the device is booted into Recovery Mode

Step 3 On your computer, launch iTunes to make sure your device is in recovery mode

Now you can easily reset and restore, as well as flash the gadget’s firmware.

How to exit Recovery Mode

Exiting recovery mode is quite easy. To do this, press and hold the Power button until the device turns off, then press the same Power button again to turn it on again in normal mode.

It also happens when an iPhone, iPod or iPad refuses to exit Recovery Mode. The device enters Recovery Mode Loop mode. In this case, to remove the device from this mode you need to use special utilities, such as TinyUmbrella, redsn0w, RecBoot.

Read more tips in our public pages at social networks, and also add the article to your bookmarks

After the release of iPhone 8, problems arise as a result of this. There is often a problem with them - they appear on the screen USB cable and the iTunes icon, which means the iPhone, iPad and iPod are in recovery mode. Well, how to get it out new iPhone 8 from recovery mode? Today we will tell you.

What is recovery mode

First, we need to find out that this is a recovery mode, and then find ways to withdraw. Recovery Mode is a condition in which device diagnostics cause software or hardware errors, and after a forced reboot they cannot be eliminated.

How is it different from DFU mode?

In Recovery Mode, you can reflash your phone via iTunes using the firmware.ipsw file. This solves many problems.

DFU (Device Firmware Upgrade) mode differs from Recovery Mode in that it bypasses the iPhone operating system and directly reflashes the firmware. This is an effective method and it allows you to solve problems such as the inability to flash through iTunes in Recovery Mode, the inability to unlock the phone, etc. I would recommend using it always in order to avoid unnecessary fuss with flashing and unnecessary problems.

How to manually exit iPhone from recovery mode

You can exit Recovery Mode yourself using forced reboot, just by pressing the Home + Power button and without releasing these buttons for 10-15 seconds. After this, your device will reboot. If this doesn't help, try the following ones.

How to get your iPhone out of recovery mode using Tenorshare ReiBoot

Before exiting recovery mode, you must download and install it on your computer. In fact, Tenorshare ReiBoot allows iPhone, iPad and iPod to recover from 1-click recovery mode for free.

Connect your iPhone/iPad/iPod touch to your computer using a USB cable. Then Tenorshare ReiBoot recognizes your device in recovery mode, click the “Exit Recovery Mode” button. Wait a moment and the device will reboot safely. Do not disconnect the device during this process.

In addition, if the gadget freezes on the apple, freezes when making a call, the screen goes blank or the display does not respond to pressing, the button does not work, the device reboots cyclically, the apple is on fire and others, Tenorshare ReiBoot helps you eliminate these errors. It supports rolling back from iOS 11 beta to iOS 10.3.3 without data loss, another important feature is that if you forgot your lock password, through deep recovery the program can reset the password and reconfigure it.

How to exit recovery mode using redsnow

Download and run the program, in the next window click “Extras”, and then “Recovery Fix”, then switch the device to DFU mode according to the instructions, and you safely remove the iPhone from recovery mode.

Getting iPhone out of recovery mode using tinyumbrella

The first thing you need to do is download and install tinyumbrella on your computer from the official website, and run it. Connected the iPhone to the computer using a standard cable.

1. Click on unidentified device, in our case – 1114116

2. On the right side of the TinyUmbrella program, click the button – Exit Recovery.

As soon as we pressed the Exit Recovery button, our iPhone rebooted. Thus, we still managed to exit recovery mode and return the iPhone to its previous working state.

Getting iPhone out of recovery mode without using a computer

Without a computer and want to get your iPhone 5s out of recovery mode, this is impossible. Force reboot iPhone 5s - if it's effective, then you don't need Windows or Mac.

Getting iPhone out of recovery mode via iTunes

Using iTunes, iPhone output 6 of recovery mode is in the usual way, which can update your device to the latest version to restore iOS system. But the fact is that by restoring an iPhone or iPod in iTunes, we will lose all information and all data, since before restoring it is necessary to create a backup copy. Next, we'll find out how to exit recovery mode using iTunes.

• Then you can open iTunes, connect your device to PC using a USB cable.
• Wait for it to appear on the screen iPhone images with cable connected.
• Click the “Restore” button in iTunes. The device will start working like new again.

How to log in to Recovery? Many instructions for upgrading and Android firmware require you to perform actions from the Recovery menu. What kind of mode this is and why it is needed you will learn from this article. What is Recovery? Recovery is a special Android boot mode in which:

• perform full reset Android data
• flashing a smartphone
• get Root rights

How to log in to Recovery? The Recovery menu, as a rule, is found in all Samsung smartphones and tablets, but not available in other brands of Android smartphones, but it can be easily added by flashing this section to your Android device.

If in Android smartphone there is a Recovery menu and it has not been changed, then it is called STOCK, but if it was not there or third-party Recovery menus were installed, it will be called CUSTOM.

Custom Recovery comes in mainly two types CWM And TWRP, less common 4ext,Philz C.W.M., (different development teams).

How to log into Recovery

ATTENTION! If the Recovery menu is missing or not installed, then it is IMPOSSIBLE to enter it!

Method for Samsung

Before transferring your smartphone or tablet to recovery, disconnect Samsung from charger or USB cable!

New models

Turn off Android and hold down Central button + button Volume Up+ button On/Off

Turn off Android and hold down the Center button + Volume Up button + On/Off button

in a universal way(read below).

For Samsung Galaxy S8 - S9

1. Press and hold the dedicated Bixby button and Volume Up + Power
2. After the splash screen appears on the screen, lower the power button, but continue to hold the Bixby button and Volume Up
3. Hold these buttons until the Android logo appears on the screen with a blue background
4. Release the buttons
5. In a few seconds Galaxy smartphone The S8 will boot into Recovery mode.

Older models and some tablets

1. Turn off Android and hold down Central button and button On/Off
2. Turn off Android and hold down the button Volume Up and a button On/Off

or in a universal way (read below).

Method for HTC

Switch to bootloader mode, then:

If suddenly it doesn’t work out, use in a universal way(read below).

Method for Google Pixel and Nexus

Turn off Pixel/Nexus and hold down the buttons Volume DOWN + ON/OFFIn the menu, use the volume keys to find the Recovery menu and confirm the selection with the ON/OFF button:

If suddenly it doesn’t work out, use in a universal way(read below).

Method for SONY

Turn it off, turn it on and when appear on the screen logo Sony or When the indicator will light up —PUSH/Press(possible options):

• Volume DOWN
• Volume Up
• Click on the logo
• Or turn off Sony, hold down the “Power” button, wait for a couple of vibrations, release the power button and hold down the “Volume Up” button

in a universal way(read below).

For select Motorola and Lenovo models

• Turn off Android
• Press the “Volume Up” + “Volume Down” + “Power” buttons simultaneously

For other versions of Motorola and Lenovo - turn off Android and press “Volume Down” + “Power”

If you can't use in a universal way(read below).

Universal method for all Android devicesvia PC and ADB

(Asus, HTC, Lenovo, Sony, HTC, LG, Samsung, Motorola and others, provided that recovery is available in this device)

Adb Run Program - Method 1

Using the site's proprietary Adb Run program (don't forget to enable USB Debugging)

ADB RUN working window

From the command line - Method 2

Another option for getting to the Recovery menu is using standard means ADB and ADB programs RUN:

Connect Android to PC and type command adb reboot recovery

Example in ADB RUN:

From the command line - Method 3

As practice shows, on some devices (and more specifically on LG), it is not possible to transfer an Android device using the command adb reboot recovery , in this case you should use the following command

adb shell

reboot recovery

There is also a command to switch to Recovery mode for LG, you need to enter the command

adb reboot --bnr_recovery

After which the device will begin to reboot in a few seconds!

A universal method from an installed terminal with Root rights

(Asus, HTC, Lenovo, Sony, HTC, LG, Samsung and others, provided that recovery is available in this device)

1. Download and install from Google store Play app Terminal ;
2. Go to the newly installed application;
3. Type the following commands:
   su
   reboot recovery
4. After a couple of seconds, Android will begin to reboot.

Management in the Recovery menu

Volume keys Up and down— move through the menu Key On/Off— selecting an item in the menu. There are some Android devices in which no keyvolume, in this case you will need OTG cable And computer mouse. As soon as you start putting Android into Recovery mode, connect your mouse.

This concludes the article. If you don’t know how to use it and what items in Recovery are responsible for, then read the article

• If you encounter errors while installing the update - Status CWM

That's it! There is nothing complicated! Read more different articles and instructions in the section. Stay with the site, it will be even more interesting!