How to set up computer headphones. How to connect headphones with a microphone to a computer: step-by-step instructions

Interactive communication and game worlds are increasingly replacing reality, so for these purposes you can find many devices in stores that allow you to completely immerse yourself in the atmosphere of your favorite game, piece of music, or when talking on Skype. Today, almost everyone has music or gaming headphones that can be easily connected to a computer, laptop, tablet and phone.

Windows 7 OS is loved by users thanks to its stylish interface and advanced functionality. In addition, the “seven” independently installs drivers for most external devices, which significantly saves the time of those who like to surf the Internet. However, not everyone manages to produce correct connection headphones to the computer the first time, since it is not always clear which connector you need to connect the audio device to.

Connecting headphones

The headphone plug is a standard rod (jack) with a diameter of 3.56 mm. Moreover, it is equipped with two or three black stripes (contacts). The type of device differs from their number. Two rings indicate that this is just headphones, but if there are three contacts, then this is already a headset, that is, headphones with a microphone. In the latter case, there may be one or two plugs (one for the microphone and one for the headphones).

If you connect headphones to desktop computer, then you will find the corresponding sockets for the device on the front and rear panels of the system unit. Typically the ear jack is green and the microphone jack is pink.

Laptops often have a combined headphone and microphone jack.

Healthy! If you want to connect dual-jack headphones to a single-jack laptop, purchase an additional adapter or an external sound card.

Once you have connected your audio device to your computer, you can proceed to the settings.

Setting up headphones on a computer and laptop

If you are using headphones that work via USB, then as soon as you connect them, Windows will automatically start looking for drivers for them. If this does not happen or we are talking about a headset with a standard jack, then you will need to find software for the devices on the Internet on the website of the headphone manufacturer.

After that, you will need to go to the Start menu, go to Control Panel and find the Hardware and Sound tab and then select Manage sound devices.

Then in the window that opens:

Go to the “Playback” tab.
Make sure there are no red checkmarks or exclamation marks next to the playback devices that are displayed.
Click on “Speakers”, then the “Configure” button will become active, which you need to click on.

The window that opens should be set to stereo mode.
Return to the Playback tab.
Select required device(headphones) and right-click on it.
In the window that opens, in the “General” tab, you can see data about the connection socket and other information.

Healthy! Sometimes Windows does not name the headphones according to the device model; in this case, you need to determine the ears by a method of elimination. For example, standard speakers in the case of ASUS laptop are usually called Realtek High Definition Audio, and the Philips USB Headset will be called simply "USB Audio Devices".

Advice! If the headphones are not displayed, right-click and enable the displayed disabled devices.

Also in the headphone properties, you can go to the “Advanced” tab, where you can make more “fine” settings. The Levels tab allows you to make the microphone quieter or louder. If you don’t know how to increase the volume in headphones on a computer, then in the same menu there is a sound level.

This is not the only way to make sounds quieter and louder. You can also open the master volume mixer by clicking on the corresponding icon in the bottom panel (on the right, next to the clock). Another way to answer the question of how to increase the sound in headphones is to go to the toolbar, where you need to go to “Hardware and Sound - Volume Settings”. In addition, many manufacturers equip headphones with a volume control.

In some cases, after all the settings, users are faced with the fact that Windows does not see audio devices or the sound does not come through the headphones. Let’s look at the most common problems.

Problems connecting headphones to a computer

If headphones do not work on a computer, there are many reasons, starting from the most basic. For example, you set the volume on your laptop, but on the control of the audio device itself, the switch is in the Min position. In addition, you need to make sure that the headphone plug is connected to the correct green jack. At the same time, it holds tightly and is installed all the way.

More serious reasons why headphones do not work on a computer may be:

Malfunction of the connector for connecting to the sound card. To make sure that this is not the problem, try connecting any other headphones or speakers to this jack. If they don’t work either, it means the problem is in the connector itself. Most often, such problems arise if the sockets are located on the front panel of the computer’s “system unit”. Some manufacturers leave them completely unconnected during the assembly process of the system unit.
Incorrect or missing headphone drivers. Even if Windows kindly installed the software for the headphones without your participation, it is still better to download them yourself. If you don't have boot disk, then just visit the manufacturer’s website and select latest version drivers.
Drivers are not working properly sound card. This problem is most often encountered by those who reinstall Windows 7 on their own. After updating the software of your computer or laptop, you must download all the drivers that go with it. specific model. In order to install them, you need to go to your PC manufacturer's website and download the latest updated drivers.

Before changing computer settings, it is recommended to test the headphones on another device, such as a smartphone or tablet. It is quite possible that you simply came across defective “ears”.

Speaking of using headphones on your phone. Smartphones usually do not require drivers to be installed. However, if you are tormented by the question of why the phone does not see the headphones, then it is possible:

This model is not compatible with your phone.
You need to purchase a plug connector.
You forgot to turn on Bluetooth when it comes to connecting a wireless headset.

In conclusion

In most cases, Windows connects the device without any problems and the cause of apparent malfunctions is simple inattention. To make sure that you did everything correctly, it is recommended that you read the included set or download the instruction manual for the “ears” yourself, which will indicate all the features of the device.

Recently, laptop manufacturers are increasingly following the fashion set by the smartphone market: instead of two separate audio jacks - for headphones and a microphone - they install a combined one. In some ways, this is logical: there are now a huge number of headsets on the market that users will willingly use for conversations on Skype or other services. And watching videos or listening to music in them is just as convenient.

However, this twist does cause some compatibility issues. It's not always possible to connect your headset to your computer easily, especially if it was made several years ago and has separate plugs for the microphone and headphones. But buying a new one is not always an option, especially if your headset is not a budget one.

How to connect headphones with a microphone to a computer so that they work?

Let's look at all possible combinations of computer connectors and headphone plugs.

1 plug, 1 connector

The situation is when you want to connect a headset from a smartphone to a laptop with one output. The simplest one: inserted it and it worked. Manufacturers specially make a combined output so that you can work with it so simply.

1 plug, 2 connectors

The smartphone headset must be connected to the computer, where the audio output is divided in the old fashioned way. In general, you have three options:

Connect a headset to the headphone output and use the built-in microphone of your laptop or webcam. Of course, if you have another microphone.
Connect a headset to the microphone input and use third-party headphones or speakers. Again, if you have them. In addition, these two options require setting up Skype or other conversation programs: you must separately select the sound source and microphone input.
Use an adapter. Sometimes such adapters are included with headsets, especially expensive ones. They have two plugs and one input connector: sometimes they can be connected by wire, and sometimes they can be soldered into one housing (like an airplane adapter).

Before connecting headphones with a microphone to your laptop, check the functionality of the headset. Try using it for a conversation, for example, on a smartphone or tablet via Skype.

Two plugs, one connector

Again, you have two options for connecting headphones with a microphone to your computer even like this:

Use the headset in only one capacity - headphones or microphone. The wiring of the standard headset allows you to work with it in both versions. And the second device will have to be connected separately or use the built-in one (webcam microphone or laptop speakers).
Use a splitter adapter. As a rule, they cost about two or three dollars (especially if bought in foreign online stores). The splitter usually has two outputs with markings indicating which one to connect the microphone plug to and which one to connect the headphone plug to.

Two plugs, two connectors

Everything here is extremely simple, the main thing is to remember that the headphone plug and jack are usually painted green, and the microphone jack is pink.

Tips for all occasions

After connecting, be sure to check for sound and input signal from the microphone. This can be done through the Windows system mixer (speaker icon in the lower right corner, in the tray). Right-click on the icon, select “Playback Devices” to check the headphones or “Recording Devices” to check the microphone. Opposite the device you need, a flashing green volume indicator is shown during operation. Make this device your default choice.
Listen to your own voice in headphones and adjust (in the mixer) a comfortable microphone volume level.
You can buy an external sound card for ridiculous money and connect it via USB. The sound quality of an inexpensive card will be approximately the same as on the built-in one, but there are always separate microphone inputs and headphone outputs. Special drivers for such cards in Windows 7 or later are not needed.

And let's hope that laptop manufacturers will not follow the bad example of Apple and abandon wired connections altogether.

Headphones are a device for personal listening to sound files. They are used in cases where playing music or other audio information through external speakers may disturb people around. To use these gadgets on your PC, you need to know how to connect headphones to your computer.

Connection via wire

Typically, sounds are played back from a PC to headphones using a sound card. The connection to the computer is made through connectors located on the rear wall of the system unit, but sometimes they are also placed on the front panel. Because the inputs are different colors and the plugs are colored similarly, so it’s quite difficult to make a mistake.

Rear Panel Connections

To connect headphones to the rear panel, the green plug (speakers) must be inserted into a connector of a similar color. If you need to connect an accessory with a microphone, otherwise called a headset (for example, A4Tech Bloody G500), then you also need to combine the pink (microphone) plug with the connector. This should be enough to listen to music.

Important! The absence of sound indicates that you need to check that the drivers installed for your sound card are up to date.

This is done as follows:

Device Manager opens;
select “Sound, game and video devices”;

if the audio card is not displayed, new drivers are downloaded and then installed.

If after performing the manipulations the sound does not appear, you should perform the following actions:

by clicking on the speaker icon in the tray (lower right corner of the monitor) select “Playback devices”;

if the headset is not displayed, configure the display of disconnected devices;

through the context menu, enable the headphones, and then set them as the default device.

Front Panel Connections

Connection through the front panel is carried out in the same way.

If there is no sound, you need enable system level inputs, for example, through Realtek Manager HD. This is done by the following steps: open the “Control Panel”, find “Realtek HD Manager”, select the “Speakers” tab (“Sound inputs and outputs” for Windows XP), click the folder icon at the top right, where you select “Disable detection of front panel jacks” "

Advice! If there is still no sound in the headphones, and you need to connect them specifically to the front panel of the system unit, you need to disassemble it and connect the connectors to system board manually.

Connection via USB port

To connect a headset (for example, SVEN AP-U980MV) via USB output, you should select one of the most convenient connectors and in the future use only it to prevent the settings from being reset.

Next you need to connect the headphones to the computer. If they do not have a microphone, the PC will recognize them as one device. If this is a headset, then variations are possible depending on the manufacturer - the device will be listed as one device or two. In the latter case one device will be shown for main audio and the other for chats With voice communication, for example, Skype. After connecting, the PC will install the drivers. If this does not happen, you need to download them yourself.

Headset SVEN AP-U980MV

Connecting a wireless headset

Connecting a Bluetooth headset is carried out differently, depending on the adapter included in the kit.

Connection via supplied module

To connect a headset of this type, the Bluetooth adapter must be plugged into a USB port. If the automatic installation of drivers does not start, you will need to download and install them manually. Next, in the tray through the Bluetooth context menu you should select “Add a new device” and then turn on the headphones for pairing. Once detected, they will appear in the list of devices. In some cases, you will need to specify a password to connect (the default is “0000”).

Connection without adapter

If the Bluetooth module is not included, you can connect wireless headphones(eg JBL E40BT or DENN DHB101) via Bluetooth adapter purchased separately. In this case, you will also have to download and install drivers for the purchased device yourself, if the OS does not prompt you to do this automatically when you connect it.

After installation, a Bluetooth icon will appear in the tray. By right-clicking, you need to select “Add a new device” and turn on the headset for pairing. As soon as the computer detects it, the name will appear in the list of found devices. To connect, you need to click on it and, if necessary, enter the password “0000”. Other connection nuances wireless gadgets- in the material ““.

Nuances when connecting

Were considered classic methods connecting headphones to computers. However, there are various variations of this process, for example when connecting to a laptop or when different versions installed OS.

Features of connecting to a laptop

Unlike PCs, laptops most often have a combined microphone and headphone jack.. Therefore, you can connect to them either headphones from your phone with a combined plug, or a headset for your PC via a separately purchased special adapter. This is the case when connecting a wired accessory. And for Bluetooth headphones, the connection is similar to the procedure described above through the included module, taking into account that you do not need to insert an adapter, since it is already built into the design of the laptop.

Features of connecting a headset with a microphone

If the user plans to use a microphone, you need to:

open “Recording Devices” through the speaker icon in the tray;
configure the display of disabled devices if there is no microphone;
turn on the microphone and set it as the default device;
open “Playback”;
set the headset as the default device.

Difference in connection via Windows 7, 8 and 10

If you don't take into account different path to access sound settings in different OS versions, setting up a headset in Windows 7 and 10 versions is very similar.

Note! Windows 10, like Windows 8, is better at automatic installation drivers, especially for sound cards or audio devices. On Windows 7, these steps are best performed manually.

Features of old, professional and gaming headphones

If you use professional headphones used on TV or radio stations, you will find that they are equipped with a larger plug (6.5 mm). That's why to connect them you will need an appropriate adapter. The same difficulties may arise when trying to connect very old models with an ONTs-VG type plug. Adapters are also available for these.

Most headphones for gamers with a USB connection type are defined by the PC as two devices: for audio playback and for chatting. For them you need to separate tasks to eliminate mistakes. The primary (with the “Speakers” status) will be used by default, the secondary – as a communication device.

Setting up headphones

Adjusting the sound

To configure the sound, you need to follow a number of simple steps:

open the speaker context menu in the tray;
select “Playback devices”;
open headphone properties;
in the “Levels” tab, set the desired volume and adjust the balance;

open “Improvements”, where there is an equalizer with fixed sound settings depending on the genre, the ability to turn on surround sound and other parameters;

in the “Advanced” tab, set “Studio recording” with a frequency of at least 96000 GHz to ensure maximum sound quality;
Click on the “Check” button to make sure correct setting sound, if necessary.

Setting up speakers and headphones to work simultaneously

The easiest way to set up speakers and headphones to work simultaneously is purchase a splitter with one 3.5 mm input and two outputs, connect it to the system unit, and then insert the plugs into it. In this case, the sound will be played simultaneously in two devices.

If the user needs the devices to be connected to different connectors, but at the same time play sound simultaneously, the following steps should be taken:

open “Control Panel”;
select "RealtekHD Manager", "Speakers" tab, then " Additional settings devices";
click “Mute rear output device”;
Click “Merge input jacks of the same type”;
commit the action by clicking “OK”;
select the envelope icon at the top right;
In the window that appears, check two boxes.

Now the sound will go simultaneously to both devices connected to different connectors.

Advice! Thanks to the described method, the user will be able to switch the sound from headphones to speakers and back without pulling the plugs out of the connectors, thereby extending their service life.

Checking the headset for functionality

If, as a result of connecting the accessory to the computer using the methods described above, sound is not played through the headphones, you should check them for serviceability. This can be determined connecting the gadget to a smartphone. If you hear sound, you need to look for a problem in your PC. The absence of an audio signal will indicate a breakdown of the device.

To diagnose the headset, you should connect the microphone from the headphones and use one of the online applications, for example MicTest. This service will ask you to provide access to the microphone and speak a few words into it. After this, a loudness rating will be given.

Possible connection difficulties

If the headphones are connected, the drivers are updated, but there is no sound, you need to first check the mechanical control on the headphones, and then the sound volume in the tray. Next, you should open the volume mixer through the context menu, where you can adjust all applications. You need to find the app that is currently playing video or audio and make sure it is not muted or muted.

Thus, you can connect not only regular headphones to your PC or laptop, but also a computer or telephone headset. The main thing is to correctly connect the plugs into connectors of a similar color or with the appropriate designations. If there is no sound, you need to update the drivers and make a number of necessary settings. And if the headphones are in good working order, then high-quality listening to sound files is guaranteed. And what PC devices are best to buy - in the material ““.

The most popular headphones of 2019

Headphones JBL T500BT on Yandex Market

Headphones Pioneer SE-MS5T on Yandex Market

Headphones JBL Everest 310 on Yandex Market

Jabra Elite 65t headphones on Yandex Market

Headphones Sony MDR-7506 on Yandex Market

If you spend most of your time in front of a computer monitor, communicate with friends or colleagues on Skype, or just want to listen to your favorite songs, then you cannot do without a special headset. A very common question is how to connect headphones with a microphone to a computer. After all, at first glance, there is nothing complicated in this process: connect the plug to the desired socket - and everything is ready. Unfortunately, it's not that simple! First, there are several types of headphones. Secondly, you need to choose the right headset for your operating system. Thirdly, most often you cannot do without manual settings. In general, this procedure will require your attention and patience.

Basic rules

The first thing you need to do is determine whether you have an audio card installed on your computer. Its usual location is motherboard or a separate connector in the system unit. If it is missing, then this device you need to purchase it, because without it the headphones will not work. After purchasing a sound device, you need to install the appropriate drivers. By the way, an inexpensive model is quite suitable for communication, the main thing is that it has socket connectors for the necessary headset.

Then you need to carefully read the instructions in order to identify where the headphone jack is located. Usually there is a special icon next to each connector. Also, each socket has its own color: the microphone is pink, and the headphones are green.

So how to connect headphones with a microphone to a computer?

First of all, you need to insert the connectors from the headphones and microphone into the corresponding sockets on the rear panel. By the way, in new computer models the connection is made through the front wall of the system unit. Sometimes after these manipulations the headset starts working, but in most cases you need to manual settings. The next step in the settings is to check for the presence of a driver for the sound card. Every program installs them by default, but the best option is to install native software. If you are convinced that special program is on your PC, but the headset still doesn't work, here's what you need to do. Go to the recording devices tab and set the microphone as the default device. If this column is not displayed, then right-click and select “Show turned off devices”.

If the headset does not respond when connected through the front wall of the system unit, then you need to go to the audio card driver and perform the following steps:

if your PC has an audio driver from Realtek installed, then you need to select the “Disable front panel input definitions” function;
if your software is from VIA, then go to the front panel settings and specify AC97 instead of HD Audio.

Connecting different types of headphones

It doesn’t matter what kind of headset you use, the main thing is to figure out which connector to connect it to. And if necessary, select an adapter that eliminates the occurrence of a short circuit and, as a consequence, damage to the device.

Connection different types sound equipment will be discussed below.

A device with a microphone. This model has two connectors. In order to connect them to a PC, you need to find a socket labeled mic. Another important point: for high-quality headphones to work, you need to configure them correctly. software on the computer. You can do this in this simple way: select the Start window, go to “Control Panel” and open the “Sound” function. Then open the "Record" window and check if the microphone input is enabled; if not, connect it.
Professional devices. This refers to headphones that are used on radio stations and television. Its main difference is the plug, which has a diameter of about 6.5 mm. Such devices can be connected to a regular connector, but do not forget to purchase a special adapter. According to experts, such a connector puts a lot of stress on the socket, which threatens its failure. There is another way when you can make an adapter yourself. This requires a plug with a diameter of 3.7 mm and a socket of 6.5 mm, which must be connected using a wire with a copper core.
Old equipment. Headphones that have an old 5 din plug (ONTs-VG) cannot be connected to a PC without an adapter. You can make it yourself. Radio engineering specialists know that similar connectors are located on old TDS brand headsets. And although this technique is outdated, its sound quality is not inferior to many modern models. To do this you will need a tool such as an ohmmeter. With its help, you need to check the pinout of the connector contacts: if it is connected between the input and the common channel of one of the two contacts, then clicks will be heard in one. If you hear characteristic sounds in two channels, then they have a suitable connection. Once you have identified the channels corresponding to the stereo connector, start making an adapter. All you need is a regular ONTs-VG connector, which has 5 contacts and a jack plug with a diameter of 3.6 mm.

So we figured out how to connect headphones with a microphone to your computer, no matter what equipment you want to use.

Rear connection

This type of headset has become very popular lately. This fact is explained by the fact that more and more users communicate via Skype and use such equipment for similar programs. Also, these devices help keep in touch with partners network games. However, there is a problem: they often do not want to work on older PCs that are not equipped with the appropriate socket connectors.

How to connect headphones with a microphone to a computer (Windows 7) to the back panel? First, to do this you need to determine whether the system unit has a jack for a stereo headset. After this, you need to make sure that you have connected the correct cord to the stereo jack. This guarantees high-quality sound and long-lasting operation of the device.

How can this be checked? To do this, you need to look carefully at the plug; there should be 2 black lines on it. If you do not notice them, then there is no need to connect the device, as a short circuit may occur, which could result in equipment failure. If you use regular headphones, be sure to buy a special adapter that eliminates the risk of fire. You can buy it at a radio equipment store or make it yourself.

The most suitable option for connecting to the rear panel is a standard stereo device with a 3.6 mm jack cord. In this case, the headset can be connected directly to the green jack on the audio card. If the connectors do not have a color difference, then you can navigate by the Phones icon, which is always located near the desired socket.

Front Panel Connection

The sockets for audio devices on modern system systems are most often located on the front wall. And this is very convenient, because all the connectors are visible and it’s easy to find the one you need.

Before connecting an audio headset to your PC, regardless of the operating system, you need to install software from Realtek. These are the most popular electronic devices controls that can be found in almost every system unit.

How to connect headphones with a microphone to the computer on the front panel? The procedure is as follows:

First, pay attention to the jacks: the one for headphones has a corresponding icon next to it. The microphone must be connected to a different connector. As already mentioned, you will see special icons next to the nests. In addition to the images, you can distinguish the plugs by color: the headphones are green, and the microphone is pink.
The second step is to launch Realtek, which you will find in the tray. For those who don't know, the tray is the notification area or one of the toolbar elements on the desktop. In the window that appears on the right you will see sockets for connecting audio devices. Active connectors will be highlighted in a bright shade, while disabled ones will be slightly blurred. To activate them, you need to open the folder with the parameters of the socket connectors, which is located at the top of the menu. After opening it, you get access to their management. Then you need to select the “Disable front panel jack detection” function, after which you can determine the jacks to which you want to connect headphones.
Then you need to connect the microphone. Open Device Selection and select the headphone or microphone icon from the list. It is highly recommended to test a new headset, for example on a smartphone. Since there is a risk that you will spend a lot of time connecting faulty audio devices.
Simultaneous connection of headphones and speakers. There is an opinion that they can only be connected to special sockets, but this is not so. This problem can be solved using a fairly inexpensive splitter, to which you can connect two or more audio devices at once. But before that, make sure that your amplifier can withstand this voltage.

Setting up a headset on Windows 7

This operating system is very popular in this matter. How to connect headphones with a microphone to a computer (Windows 7)? The step-by-step instructions are as follows:

First, you need to determine the purpose of the jack connector: is it stereophonic or not. If this is so important to you, then connect a suitable stereo plug to the audio jack. Best option- headphones with a 3.6 mm jack connector. In this case, the connection goes directly to the green socket. If you purchased a professional headset, then you need to make or buy an adapter, because such equipment can damage the audio jack. If the headphones are old, then you also cannot do without an adapter device, which you need to make yourself.
Then you need to configure the software. For this operating system, the driver from Realtek is best suited. After it starts, activate the disabled connectors. Then, through the “Connector Options” option, check the “Turn off detection of front panel connectors” checkbox. After these manipulations, you will find the sockets to which you need to connect audio devices.
If everything is in order with the software, but the headset still does not work, then you need to perform the following steps. Go to your tray folder and open Recording Devices, where the default device is a microphone. Otherwise, activate the “Show turned off devices” option.
If the headset does not work through the front panel of the system unit, then you need to go into the audio card program and fix something. If your driver is from Realtek, then you need to select the “Disable installation of front panel connectors” function, and if VIA, go to the settings and instead of HD Audio, specify AC97.

Setting up a headset on Windows XP

Headset settings vary for different operating systems. But there are several points that need to be completed, regardless of which Windows is installed on your PC. First of all, you need to check whether your computer has an audio card. If you don't have a sound device, you need to purchase one and install the appropriate software. If you only need an audio headset for communication, then you can buy a standard, inexpensive model with connectors for audio devices.

Then, based on the identification images or color differences, you need to determine the placement of sockets for sound devices. Next, connect the headset and start communicating, listening to music, etc. If the headset does not respond, you need to make settings.

How to connect headphones with a microphone to a computer (Windows XP):

First, you need to set up your microphone. To do this, go to the “Control Panel” and open the “Sound and Audio Devices” item, after which you need to open the “Speech” option.
Then, through “Volume”, go to “Options” and go to “Properties”, where you need to select the “Microphone” item.
Check if the microphone is turned on, then you need to go to “Recording Level” and adjust the sound through the “Settings” item.
After the dialog box appears, you need to select the inscription “Microphone Gain”. If noise or a characteristic whistle occurs, you need to move the talking device away from the speaker.
Return to the “Speech” tab and check the operation of the equipment. Ready!

Setting up a headset on Windows 8

This operating system is relatively new and therefore incomprehensible to many. This is the reason why setting up audio devices seems like a daunting task. However, this is not true.

How to connect headphones with a microphone to a computer (Windows 8):

First, you need to find the appropriate connector for the connector, and you can find it using a special image. If you connect the headset through the back wall of the system unit, then be guided by color.
Then you need to go to “Search”, to do this, move the mouse cursor to the upper right corner of the screen. Find the “Sound” option in the context menu and open the “Recording” tab, where you will see the active recording devices.
Under these devices you need to find an empty column, which you should right-click on. After of this action 2 items will open: “Show turned off devices” and “Show disconnected devices”. They need to be activated, after which you can check the functionality of the sound device.

This will be the answer to the question of how to connect headphones with a microphone to a computer (Windows 8).

Connection via bluetooth

The only model that uses Bluetooth technology is the wireless headphones. In addition, your PC needs to have a special adapter, which is usually sold in a set with audio equipment.

So how to connect headphones with a microphone to a computer (Windows 7) via Bluetooth?

There are 2 types of adapters: external, which connects to a USB port, and internal, which requires driver installation.

To do this, go to the Windows 7 control panel, find the “Device Manager” column and open it. You will see a list where you need to find a Bluetooth device. Then, using a supporting program (utility), activate the adapter on your PC. To do this, you can use the Blue soliel program, which is suitable for this operating system. Next, following the instructions in the instructions, connect the headphones. And finally, check if they appear in the list of Bluetooth devices. Then you can check their performance.

So we figured out how to connect headphones with a microphone to a computer (Windows 7).

Connection for Skype

Popularity of this service is increasing every day as it is a very convenient method of communication. For its normal operation, you can do without high-speed Internet, but you can’t do without sound equipment.

The most popular operating system today is Windows 7. That is why users are increasingly asking the question: how to connect headphones with a microphone to a computer (Windows 7) for Skype? Step by step instructions:

First of all, you need to connect the plugs to the required connectors: headphones to green, and microphone to pink.
There are wireless audio devices that have a radio transmitter that you plug into a USB port. Then you need to turn on the headphones, after which a notification will appear on the monitor that the device is turned on and ready to use. If the equipment kit contains a disk with special software, then it needs to be installed and launched.
If after this procedure the microphone does not work, then you need to perform the following steps. In the control panel, select “Recording equipment” and open the “Recording” tab. Find “Microphone” in the list and activate it.
Additional settings can be made in the Skype program settings.

So we figured out how to connect headphones with a microphone to a computer for Skype.

Possible problems

As unfortunate as it may be, difficulties in the operation of audio equipment arise quite often. Thematic forums discuss the most common problems associated with PC headsets. And among the questions the leader is “How to connect headphones with a microphone to a computer on Windows 7?” . And all because annoying problems arise quite often on a PC that runs on this operating system.

Typical headset problems:

No sound . Solution: Check the plugs when purchasing.
The socket doesn't work. Solution: you need to check the socket; to do this, connect working headphones or speakers to it.
Incorrect settings on the mixing console. Solution: Go to the tray, open the “Sound” option and configure it.
The PC does not find the audio device. Solution - go to the “Task Manager”, open the “Sound, Video and gaming devices controls" and click on the "+" sign. If you see a question mark next to a device in the list, then you need to update the audio card software.

Hello.

Quite a lot of questions always arise with the sound: sometimes it’s not there, sometimes it’s hard to hear, sometimes the connectors are not right to connect the plug, or something else...

In this article I would like to dwell on the issue of connecting and setting up computer headphones with a microphone (approximately the same as in Fig. 1). After all, without them it’s quite difficult to imagine normal work on a PC: you won’t talk to friends and relatives on the Internet, you won’t listen to music or watch a movie in the evening (so as not to disturb anyone), etc.

if your sound is too quiet and you want to boost it:
if you have no sound on your computer -

Fig.1. Headphones with microphone // as an example (not advertising!)

Types of connectors and plugs / adapters

The most common classic computer headphones with a microphone have two plugs: green and pink (see Fig. 2). Green is for transmitting a signal to the headphones, and pink is for the microphone.

Rice. 2. 2 plugs on classic computer headphones (they are also called mini-jack)

Actually, if you look at the back wall of the computer system unit, you will see 3 connectors (Fig. 3). Their colors are usually always standard: pink (for a microphone), blue (line-in for connecting audio devices), and green (line-out for headphones, speakers, etc.).

By the way, such connectors (as in Fig. 3) may not exist if you do not have an audio card installed on your PC. You can find out its model and determine whether it is installed from this article:

Rice. 3. Outputs on the back of the computer

Actually, if everything is so, you just need not to confuse the colors and connect the plugs to the right connectors. It's simple...

As for laptops, their connector is not always marked with a color: often the headphone or microphone icon is simply drawn. By the way, please note that on newer laptops - it occurs headset jack(see Fig. 4). Those. If there are 2 classic audio outputs, then when you are dealing with the headset jack, there is 1 (it has a characteristic icon, see the difference in Fig. 4)!

If you have classic computer headphones, and your laptop has just such a headset jack installed, you have several outputs:

buy a special adapter (see Fig. 6). It is not expensive and is sold in many computer stores;
buy a small audio card that connects to a USB port (there are also cheap options);
you can buy new headset headphones (or swap with someone ☻);
if you don't need a microphone, you can try connecting the green plug from the headphones to the headset jack. In most cases, headphones will work for you (although this is not recommended!).

By the way, please note that the plug on headset headphones has 4 pins (the plug on classic headphones has 3 pins). Even by this sign you can easily determine what kind of headphones you are buying...

Rice. 6. Adapter for connecting classic computer headphones to the headset jack (by the way, there are also reverse adapters to connect headset headphones to classic audio outputs)

Another article to help you!

One input for headphones and microphone in a laptop - how to connect them -

One more moment!

Expensive (most often studio) headphones have a Jack plug (on classic headphones Mini Jack). If you don’t have a Jack connector on your computer/laptop, you can buy a small adapter from Jack to Mini Jack (see Fig. 7) and easily use these “ears”...

Rice. 7. Plugs (Jack and Mini-Jack). Adapter

If you have one line output for headphones and speakers

Sometimes people ask me what to do if you need to connect both headphones and speakers to the computer, but it has only one line output (i.e. one audio jack) on the back wall of the system unit. I'll try to give a couple of recommendations on this matter.

1. Use audio output on speakers

Many speakers have dedicated audio jacks for connecting headphones. When you connect headphones to them, the sound from the speakers will disappear. It may not be very convenient if the plug accidentally comes out of the socket (especially if it happens in the evening when everyone is sleeping ☻). Therefore, see the second option.

2. Buy a splitter (special adapter)

You can connect speakers and headphones in parallel to the audio connector (splitter, see screenshot below). Using a splitter, in my opinion, has its advantages:

the sound goes to both speakers and headphones at the same time;
if you don’t need speakers, just turn them off (this way, even if the headphone plug falls out of the socket, there will be no noise from the speakers!);
the price of the issue is a pittance...

3. Use the front panel on the system unit

On some system units, on the front panel, there are additional multimedia connectors (if you don’t have such a socket, you can also get one; many service centers easily connect it). Actually, you can easily connect headphones and a microphone to such a socket (and many other useful things ☻).

Checking drivers for an audio card

We will assume that we have dealt with the plugs and connectors directly, the “wires” are now connected ☻. The next step is to check and configure the drivers. And I must say that drivers sometimes cause quite a lot of problems with sound. Most often, there are simply no drivers, or they are not installed. current version, causing conflicts.

To see if the system has a driver for your audio card, open device Manager (to do this, press the WIN+R button combination and enter the command devmgmt.msc).

Rice. 8. How to open the device manager // WIN + R (Run window).

Rice. 9. Sound, gaming and video devices

If there is a yellow exclamation mark next to your device, it means there is no driver in the system. By the way, usually those devices for which there are no drivers are located in the "Other devices" .

Rice. 10. There is no driver for the audio device! Needs to be updated!

How to install the driver for sound. Search for audio drivers (using Realtek as an example) -

Driver update programs -

How to install drivers on a computer, laptop -

Setting up Windows and audio driver. No sound in headphones

If the headphone plug is connected correctly (to the right connector), the drivers are installed, you should already have sound (even if it’s not of very high quality yet). If you have no sound at all, I also recommend that you read this article:

First thing to do- this is to check the volume control on the headphones themselves. Such a regulator is found on most computer ears (see Fig. 11).

Rice. 11. Turn the microphone on/off; increase/decrease volume

Then pay attention to the volume level: click on the sound icon in the tray. Often such a banal thing is the reason for the lack of sound ☻...

After this, I recommend that you also check the volume mixer (it is quite possible that you have the volume turned down in a particular application). To open it, just right-click on the sound icon in the tray, select from the menu that appears "Volume Mixer", as in Fig. 13.

In the screenshot of the volume mixer in Fig. 14, for example, system sounds are reduced (or rather, even disabled). For initial testing and setup, I recommend moving all the sliders higher.

After that, open the panel Windows management chapter "Equipment and Sound"(valid for Windows 7/8/10). In this section, open the “Sound” tab, see fig. 15.

In it, be sure to check that there is a green checkmark next to your playback device - i.e. it was selected by default!

Note: The default device for sound playback can be selected by Windows, which is generally disabled! And then there will be no sound! If you don’t know which device to set as the default for sound playback, try each one in turn, after turning on some song/movie...

To check the sound quality, select the desired device: right-click on it, and select “Test” from the menu. A short melody should sound first from one speaker, then from the second.

And one more thing!

Don't forget to check and set the sound settings in your audio drivers. You can open their settings using the tray icon (next to the clock, if there is an icon there), or in the control panel in the section "Equipment and Sound", as in Fig. 17.

Actually, the driver setup itself will depend on the specific manufacturer. It is quite difficult to give any specific recommendations here...

An example of such fine tuning of headphones is shown in Fig. 18: you can turn down the volume of the left or right ear, set the volume of the headphones and microphone, check the operation of the audio connectors, set the desired sound effect and much more...

Microphone check

Your interlocutor hears you poorly (or does not hear you at all), there is extraneous noise, hissing, etc. “charms” - and other problems may be due to the fact that fine tuning microphone in Windows and the conversation application you use (Skype, Viber, etc.).

In Windows, you can configure the microphone in the "Sound" tab (you can open it in the Control Panel, in the "Hardware and Sound" section). To set basic parameters, open the microphone properties, see fig. 19.

In general, I recently had an article on my blog about checking and setting up a microphone in Windows, so I won’t repeat it here (link to the article below).

How to check the microphone on headphones (it’s hard to hear me...) -

PS: additions in the comments are welcome...

Well, that’s all, quick and successful setup everyone.