Recover deleted files in Windows 10. How to recover files deleted from your hard drive
Windows Update 10 October 2018 Update (build 17763, version 1809) mysteriously deletes user profiles along with all their data on the computer after installation. Dozens of complaints, hundreds of gigabytes of lost personal and work files and complete uncertainty - this is how the situation looks now.
Today, October 6, Microsoft began an internal investigation and temporarily rolled out the Windows 10 October 2018 Update to all users, but has not yet told those affected how to fix the problem. The company's recommendation is to never install Windows 10 October 2018 Update, even on your own through installation media.
Even though no one knows why files are deleted, they can be recovered. The editors of Trashbox, based on reviews from some foreign publications, have prepared appropriate instructions.
How to avoid deleting files before installation
- Search for "Change" group policy" and open the Local Group Policy Editor utility when prompted.
- In the left pane, go to the Computer Configuration → Administrative Templates → System → User Profiles node.
- In the right pane, select the policy option “Delete user profiles on system restart after a specified number of days.”
- Make sure it is set to Not Configured or Disabled.
How to recover deleted files after installation
- Download the free Recuva utility from the official CCleaner website and install it on your computer.
- Launch the Recuva utility and select the drive on which the deleted files were stored.
- Click on the "Analysis" button and wait for the scan results.
- Select the files you want to recover from the list and click the “Recover” button in the lower right corner.
The methods described above have been tested by several users, however, they do not guarantee one hundred percent that you will recover deleted files. If you have not yet installed Windows 10 October 2018 Update, we recommend that you back up everything in advance. operating system.
In this article we will look at two effective ways recovering data deleted from the recycle bin!
The basket is one of the important tools in the operating room. Windows systems, intended primarily for temporary storage deleted files. This convenient operating principle allows it to become an indispensable element. GUI for any user. Agree, placing a now unnecessary file in the trash with the possibility of its further recovery looks much more favorable than instant and permanent erasing.
There are two types of document deletion:
- DELETE key. “Erases” the file(s) you specify, thereby placing it in the trash for further storage and, if necessary, complete deletion.
- SHIFT + DELETE key combination. Deletes information file system and the location of the file, but at first glance this looks like a permanent loss of the document. However, nothing disappears without a trace - the erased data is still stored on the device, even though the path to it has been forgotten.
Note:
We strongly recommend that you do not install new large applications on your computer until you complete the recovery process. Such actions can lead to overwriting of “deleted” files and the impossibility of further work with them.
If you accidentally deleted a document that is important to you and are afraid that you will no longer be able to see it, do not rush to panic! Any data can be returned with minimal effort and virtually no time.
How to recover deleted files from the Recycle Bin?
The first method is perhaps the simplest and familiar to everyone. You just need to open the window Baskets, right-click on the desired file and press Restore. Let's take a closer look:
Useful articles
1. Open Cart.
2. Select required file or select several at once.
3. Right-click on the document.
4. Now press the key Restore.
Quick solution: The cart is missing. What to do?
1. Right-click on an empty space on your desktop.
2. Open the parameter Personalization.
3. Go to section Topics.
4. Scroll down the page and open Desktop Icon Options.
5. Check the box next to the option Basket.
How to recover permanently deleted files?
Many factors can lead to the loss of important documents:
- Infecting your computer with malware.
- Voltage drop.
- Hardware damage.
- Factory defect.
- Unintentional deletion (for example Shift + Delete).
However, it is important to remember the following - regardless of the reasons for the failure, any erased file can be recovered. This whole concept is based on the basics of the functioning of the file system, which is something like a library that stores a huge number of all kinds of books.
Each book (document) lies on a certain shelf and, when you access it, the file system helpfully finds the necessary data and brings it to you. By deleting this or that document, you erase nothing more than the path itself. This brings us to the fact that not a single file ever disappears without a trace.
We recommend not to forget the note we left in the first section: under no circumstances do not download large amounts of information on the PC strictly until you complete the restoration of the necessary files. Otherwise, there is a high risk of permanent data loss due to overwriting.
Unfortunately, Windows does not provide built-in specialized software that can solve this issue, so the only effective solution is to use third-party software.
Starus Partition Recovery- an application that can effectively recover a file of any format, and a convenient and intuitive interface will help you avoid unnecessary waste of time studying long and boring tutorials.
The program has strong tools - fast and deep scanning functions. They will help you thoroughly study each individual sector hard drive and collect bit by bit even large files that previously seemed irretrievably lost.
Another feature of Starus Partition Recovery is signature search. Regardless of the scan type you choose, the application will recover any document even in the harsh conditions of a completely destroyed file system, since it works exclusively with their formats.
We hope the article was useful to you and helped you find answers to your questions.
As you know, small files deleted from the hard drive are first moved to the trash, and only then, after emptying it, disappear from view forever. In this article we will look at a situation where you deleted a file from the recycle bin through negligence and now want to get it back. First, let's look at the process of deleting such a file.
Right-click on the file and select “Delete”.
We are asked if we really want to move this file, we agree, and it ends up in the trash.
In order to recover deleted file from recycle bin, we go into it, find the desired file, right-click on it and select “Recover” from the drop-down menu.
The file is restored to the location from which it was placed in the trash. If you click on the “Empty Trash” button, the file will disappear from the Trash forever. If after some time you want to restore such a file, you will have to rely on luck and perform some actions.
If System Restore () is running on your Windows OS, then you can try the following. Right-click on the folder in which the deleted file was located and select “Restore previous version.”
I clicked on the “Desktop” folder and, as you can see, early versions of this folder opened. If you open the folder data, you can easily find and copy a previously deleted file, or click on the “Restore” button and completely restore the previous contents of the entire folder.
Attention! This method only works on those system drives that have System Restore enabled.
Let's look at the following method, which involves using backup copy(backup copy of Windows 7), if you have it.
Go to “Start – Control Panel”, set View: “Category”. Click on the “System and Security” item.
Find the archiving and recovery section and click on the “Recover files from archive” link. Let me remind you that you will only get the file if archiving is configured and if you have the archive itself:
Recovering deleted files using programs
Recovery program Recuva
Another way to recover files deleted from the Recycle Bin is to use the program Recuva. Download it from the official website: http://www.piriform.com/recuva, or look for it yourself on the Internet.
Here I will give you some tips. If you want to restore a file using this method, then:
1. Do not install or remove anything from the partition from which the required file was deleted.
2. Disable all processes related to using the hard drive directly, such as defragmentation.
3. If possible, disconnect hard drive from your computer and search for the lost file on it from another computer.
And so, launch the program, select the file type - “All files” and click the “Next” button.
Select “In Trash” to place the file and click on the “Next” button.
You can enable in-depth search and click on the “Start” button
The program finds the files, look for the date and file size we need, highlight it with a bird and click on the “Recover” button
Select the location where you want to restore the deleted file.
Advice! Don't choose the same place he was in, otherwise you risk losing him. Better create it for him separate folder and restore there, and create the folder on another partition of the hard drive.
Specify the location and click the “OK” button.
File restored:
Disk Drill recovery software
A program with a large set of functions, but still the main purpose when created was Recovering deleted files. The interface is simple and clear, anyone can figure it out without any problems. Available in different languages.
Disk Drill is produced for two operational Mac systems OS and Windows, take this into account when choosing the program version.
In some cases, it allows you to recover files even after formatting, unless, of course, multi-pass deep formatting of the disk was used.
Recovering deleted files on Windows 10
Windows 10, inherited from its predecessors, has received a powerful set of functions aimed at protecting the user and preserving his data as much as possible. Of course, there are situations when not even every recovery program can recover data, but for the average user standard set the tools may be quite sufficient.
What methods are there?
Set of built-in Windows tools 10 for backup and recovery of data and operating system consists of the following:
- file history;
- system backup and recovery;
- oneDrive;
- returning the computer to its original state;
- system image;
- special download options;
- recovery disk.
Each of them has its own function and purpose. But if we talk about restoring files and folders specifically, then the File History tool is designed for this. Using File History, you can recover both damaged and accidentally deleted files.
Setting up File History
To be able to recover files using File History, this function needs to be configured and enabled.
How to run the recovery function
The most in a simple way Using the File History function, you will simply go to the folder the files from which you need to restore. In the Home tab, find the Open section and click the Journal button. As a result, File History will enter recovery mode. 
Recovering file versions
Let's assume that changes were made and saved to the file, after which it became necessary to return the previous saved version of the file. To do this, select the required file and click the Log button described earlier. In the File History window that opens, all previously saved versions of files and folders will be displayed, sorted by date of saving.
Recovering individual files
Another recovery method provided by File History is to recover files or folders if they are deleted.
To do this, as already stated earlier, go to the folder from which the file (folder or group of files) that needs to be restored was deleted and click Log.
The File History window that opens will display previously saved versions of the folder’s contents. Find the one that contains the desired file, select it and press the green button. 
The file will be restored to the folder from which it was deleted.
To restore a deleted folder, you need to perform the same steps.
Recovery in case of hard drive failure
If your hard drive fails or fails, you can restore all files from File History. To do this, after replacing the hard drive and installing Windows 10 on it:
- connect to computer external hard the disk on which the File History was saved;
- go to Settings (from the Start menu) / Update & Security / Backup;
- Click the “Add Disk” button described earlier and add a disk from the File History previously saved to it.
From this moment on, the user will have access to the File History that was saved before the hard drive failed. It can be restored using the method described above.
Windows 10 file recovery programs
If File History is not configured on your computer and you learned about its existence from this article, then you should not be upset either.
Today there are a sufficient number of programs for recovering deleted files and folders. With their help, you can recover both accidentally deleted files and those that were lost after hard formatting disk or reinstalling the operating system.
Their operating principle is approximately the same. They differ from each other in the presence or absence of individual functions and interface.
As an example, we can consider the process of recovering data from a hard drive using Hetman Partition Recovery.
As you can see, data loss today has ceased to be a global problem for PC users. Microsoft has provided a number of functions in its operating system, using which correctly, the user’s files will always be protected. But in case you didn’t worry about this in advance, there are other developers of data recovery programs with which you can recover them.
It's common to accidentally delete an important file and then end up with a lot of hand-wringing. Whether you deleted an important file while you were in all-files-junk mode or you had to completely format your hard drive, it may not be the end of the world. There is still a possibility that you will be able to recover your deleted data if you follow the right steps and use the right tools.
You can use a third-party data recovery tool or even a special service that will help you recover deleted files. In this post, we will show you how you can recover deleted files on Windows 10 using two different methods.
Note. The instructions below work for everyone Windows versions, so you can safely use them even if you have a different version of Windows installed.
Why can data be recovered?
You might think that all your data is deleted as soon as you delete it, in reality the data is simply marked as "deleted" and tricks the OS into thinking it's not there. The data is still available on the hard drive, but as data is added it will be overwritten over time. If it has not already been overwritten, then the recovery tool can retrieve this data and allow you to recover it. You might also be wondering, does this happen with all your personal data? The answer is yes, so you should use software to shred files for permanent removal of personal data.
Find deleted file
Before we start "recovering" the data, it's best to make sure that the data is actually deleted and there are no backups. The recovery process is more difficult and risky, so it would be better if we could retrieve the file in any other way. Below we have listed some common places where your file may be hiding.
Check your cart: This may seem a little obvious, but some less experienced professionals are still unaware of the cart. When you delete a file, it goes directly to the Recycle Bin rather than being completely deleted. The basket must be on the worker Windows desktop 10, just open the trash and find the file there. If you find it, right-click on it and select "Recover" to restore the file.
Checking backups: if you are using the built-in Windows backup feature or a third-party backup tool, check external storage and see if you can find the important file there.
Checking cloud storage. If your important file was saved to a cloud storage folder like OneDrive or Google Drive, then there's a good chance it's still available in the Recycle Bin. Just go to the service cloud storage and see if your important file is available in the Trash folder. Most cloud storage services retain your deleted files for 60 days, so act quickly.
Find it: there is a chance that you may have lost the file, or another user on your PC has moved it to another location. In this case, enter the exact name of your file in the “search bar” and Windows 10 will show it to you.
Recover deleted file
But what to do if you deleted a file and there is no backup copy to restore it. So, let's start recovering your precious data using a data recovery tool. Recuva is the perfect tool for this purpose, it is simple and powerful. It has a free and a paid version, but the paid version only offers virtual hard disk support. automatic updates and premium customer support. There are no restrictions on the features of the free version, so it is wise to use free version and recover data (unless you need to recover data from the virtual hard disk).
Recuva can be used in two ways to recover data, more in a fast way and in a safe way.
What to remember before data recovery
Below are some things you should consider when recovering data:
You can only recover data from a magnetic hard drive, SSDs completely erase data and recovery software will not work on them.
Try not to add any more data to your hard drive to prevent your important file from being overwritten.
The recovery program can also recover overwritten files, so there is a chance that you may be able to recover some parts of the file.
Method #1: A More Secure Method for Very Important Files
If the file you want to recover is extremely important and you don't want to take any risks, please turn off your computer right now and read this post from another device. The more you use your computer, the more data is written to the hard drive. Even while browsing, you are adding data to your hard drive, such as local cache, temporary files and downloads, etc. Data is written randomly, so even if one part of your file is overwritten, it can corrupt the entire file.
It will also be risky if you download Recuva directly to the hard drive containing your important file, it may overwrite the file data. You can download portable version Recuva to an external drive and use it to recover data. Download the portable version on another PC and transfer it to an external hard drive such as a USB flash drive (you should remove it first).
Now connect the external drive to the computer containing your important file and run Recuva portable version from the external drive. The Recuva wizard will launch, it will guide you through the entire recovery procedure and help you recover your data more easily, click on continue to start the process.
On the first page you need to select the file type. To make it easier and faster to find your file, it is best to select the file type category to which your file belongs. Otherwise, you can also select “all files” - this will search for all files (good for several types of deleted files).
After selecting the file type, you will be prompted to select the exact location from which you deleted the file. You can select the Recycle Bin, Documents, Discs and even external drives. If you are not sure of the exact location, select “I'm not sure” and click “Next”.
On the next page, you will see the option “Enable Deep Scan” and run the scan. It is recommended to use only "Deep Scan" in case the Quick Scan cannot recover the deleted file. Deep scanning takes a long time (even hours), so it's better to let quick scan try to work. Without enabling deep scanning, click on “Start” and Recuva will begin scanning.
It will only take a few seconds to complete the quick scan and you will see all the recovered files in the Recuva interface. You should see a circle next to each recovered file indicating whether they can be recovered or not.
Green circle: means the file is fully recoverable and no data has been overwritten.
Orange circle: means that some of the data will be overwritten, but the file can be recovered and can work normally.
Red circle: means that most of the data has been overwritten and it is very unlikely that you will be able to recover the file or use it.
You can also check the box next to the files you want to recover and then click the “Recover” button below to try to recover them. If you want more options, you can also click on the “Switch to Advanced Mode” button.
In advanced mode, you can search for a file by name and also scan different locations with full control. You can also change the basic settings by clicking the Options button in the top right corner.
If the quick scan doesn't show your deleted file, repeat the process again and select "Enable Deep Scan" this time. It will take a long time, but your deleted file will definitely appear (even if she is not able to recover it).
Method #2: Faster method, but may overwrite important data
If you are not in the mood to go through the lengthy process mentioned in the first method, then you can also directly download Recuva and start the recovery process. In the process you will browse the web, download Recuva and then install it. If the data from any of these steps overwrites an important file, it may corrupt it. However, the chances are very low and if you recently deleted the file, it will most likely not be overwritten with any data. I was even able to recover data from 2 years old, so there's a good chance you won't have any problems (but there is a risk). Just download Regular as a minimum installation file and install it. Run the file and the rest of the steps are the same as mentioned in the first method.
Tip: If you are unable to recover your file using the above methods, you can also get help from a professional data recovery service. They can be very expensive, but in most cases they can recover even a completely overwritten file.
Conclusion
Recuva can save your data and allow you to use your file again. Data recovery is a matter of luck, if any of the new data overwrites your file it may become corrupted. So it's best to always have a backup of everything important files, so that you never depend on a recovery tool. You can use Windows 10's built-in backup solution or try many third-party backup solutions to protect your important data.
Were you able to recover your important data using Recuva? Share your story with us in the comments below.
Many articles have already been written about the possibility and methods of recovering data from a computer, and many users know that such a possibility exists. But as statistics show, most PC users do not use the tools built into the operating system that can be used to restore files or prevent their loss by creating a backup copy.
Data recovery and backup tools built into the OS
There are many such tools in Windows 10.
The only tool that every user regularly uses to recover a deleted file or folder is the Recycle Bin.
In order to recover an accidentally or mistakenly deleted file or folder, simply go to it. Select the file or folder that needs to be restored, right-click on it and select “Recover”.
The file or folder will be restored to the location from which it was deleted.
Using the File History feature, you can restore previous versions of files. In this function, you can configure the frequency of saving copies of files, from which they can be restored if the need arises.
To restore a previous version of a file from File History, go to Control Panel / File History / Recover Personal Files and select the desired version of the file to restore. At the top of the window the version date of the files is indicated. At the bottom of the window there are arrows that can be used to switch between file version dates.
System Backup and Restore
The name of this function speaks for itself. With its help, you can restore personal data of users from a previously created backup copy, as well as the performance or state of the operating system at the previously saved moment. Just go to Control Panel / Backup and recovery and back up files or create a system image or recovery disk.
OneDrive is a cloud storage service that is integrated into latest versions Windows operating system. It is not a data recovery tool, but as a result of its integration into Windows, by storing data in it, the user can access it from any Microsoft device, or copy it back to the computer after reinstalling the system or formatting the disk. On the computer, in the default file manager there is a OneDrive folder, saving files to which files are copied to the cloud.
As Microsoft points out, a system image is a copy of the disks needed to Windows operation. It can also include additional disks. The system image can be used to restore your computer if it malfunctions.
That is, the user has the opportunity to create an image of the operating system of his computer, along with disks. If necessary, using such an image you can restore the functionality of the operating system, as well as the disks that were included in the image, or restore individual files from the system image.
To create a system image, go to Control Panel / Backup and Restore / Create a system image.
Third party programs
Windows 10 also includes system troubleshooting features. If your computer is unstable, you can use System Restore to return it to operational state. And for those users who have not taken advantage of the standard features of Windows, programs for recovering data from a hard drive will be useful.
For example, in any of the cases: hard drive failure, reinstalling or resetting the operating system, formatting the local hard drive, run Hetman Partition Recovery and scan the disk. The program will detect and display all files that can be recovered.
Transfer them to the “Recovery List” window, click Recover and save the files to a convenient folder or copy them to a USB flash drive or memory card.
