Login to bios asus. How to run BIOS on a Lenovo laptop

Good day!

ASUS laptops are one of the leaders on today's market (good value for money). Well, since they are in demand, there are always enough questions about them...

In today's article I want to touch on one of them - namely, entering the BIOS (or UEFI on newer device modifications). Most often, this needs to be done to boot from an installation flash drive (for example, to update/install Windows OS), to disconnect some devices, view the model of components, etc.

Note : The article is replete with explanatory screenshots. Some details that you see on the screenshots may differ slightly from yours, depending on the software version of your device (but all steps will be the same for laptops of this brand).

Method 1

1. First, turn off the laptop;
2. Then hold down the F2 button;
3. Without releasing the F2 button, turn on the device;
4. Do not release the F2 button until the main BIOS/UEFI page appears.

Note: instead of holding down the F2 key, you can press it often immediately after turning on the laptop. The action will be similar, you should also see the main BIOS settings page.

As for choosing the media to boot, you need to open the "BOOT" section. Below I will consider the 2 most popular software options.

Newer ASUS laptops use UEFI instead of BIOS: there are several links at the bottom of the screen - click on "Advanced Mode (F7)" (you can also press F8 to select the media, the boot menu will open, where you can select all available drives to boot).

In the "BOOT" subsection in the "Boot Option #1" line you can select and specify the media from which you want to boot. After changing the settings, do not forget to save them (F10 key or select "Save and Exit" from the menu (i.e. save settings and exit)).

In older laptops, you will find the usual BIOS: here you can immediately open the BOOT section and specify the required drive (flash drive) in the “Boot Option #1” line. Saving settings can also be done using the F10 key.

Method 2

This method is somewhat different from the first: the fact is that we will not open the BIOS itself, but the boot menu: from it you can quickly select the flash drive or disk from which you want to boot (very convenient, and there is no need to change any BIOS settings).

I note that in boot menu There is also a link to enter the BIOS. So, if you have a problem with the F2 key, try using ESC!

1. First of all, we also turn off the laptop;
2. Then hold down the ESC key;
3. Without releasing ESC, turn on the laptop;
4. We hold the ESC key until the boot menu appears in front of us.

The boot menu is a simple list of devices (disks, flash drives, etc.) from which you can boot.

In my example below, there are 3 lines:

1. Enter Setup - enter the BIOS/UEFI settings.

Method 3: For Windows 10 users

If the previous methods did not work for you (for example, this may happen if there are problems with the keyboard), then you can resort to others. Below are a couple of options for those who use the modern Windows 10 OS.

Option 1

1. Open the START/Settings menu;
2. Then the "Update and Security" section;
3. This section should have a "Recovery" tab;
4. Look for the heading "Special boot options" and click the "Restart" button.

After rebooting the device, it will automatically pop up blue screen with special download options. Select an option , and then . See screenshots below.

Option 2

1. Press a combination of buttons WIN+R;
2. In a pop-up window "Run" enter the command powercfg.cpl ;
3. The "Power Options" settings window should open: in the menu on the left, select the "Power button actions" option.

Change settings that are currently unavailable

Now the shutdown options should become active: you need to uncheck the "Enable" quick start". Then save the settings and restart your laptop.

Disable fast startup

After reboot you will see a blue screen with several options: click option "Select other options" , or immediately "Troubleshooting" , if such a download option is immediately available (See two screenshots below).

UEFI Firmware Settings

Agree to reboot. After this, the laptop will automatically open home page(Main) BIOS settings.

That's all, actually. I hope one of the options will definitely work for you...

Additions, as always, are welcome...

That's all, good luck everyone!

ASUS is a Taiwanese manufacturer of computer equipment, components and laptops. At least a quarter of all computers in the world are assembled on the basis of motherboards from this company. This manufacturer equips its boards different versions BIOS. Therefore, there are several ways to enter the BIOS on Asus.

Instructions

The simplest case is when you need to go to the BIOS personal computer. Turn on the computer and press the DEL button several times as soon as the screen lights up. On modern motherboards ASUS boards The most commonly used key to enter system settings is DEL.

If the computer was turned on, restart it. Also click the restart button if you have already seen the Windows logo. Sometimes the computer boots up so quickly that it becomes difficult to catch the right moment and enter the BIOS. Please note that BIOS is the basic input and output system. That is, when you press the power button, the components are immediately polled and loaded operating system.

Press the F10 or F12 button when starting your PC if you have old computer(motherboard).

To enter the BIOS on an ASUS laptop or netbook, press the F2 key after turning on the power. These devices usually have a more complex BIOS and can boot even faster than a regular PC. The firmware of a laptop computer often contains advanced security settings, touchpad controls, that is, a mouse substitute, as well as an additional operating system with “instant boot”. The vast majority of models known today use F2 to access the computer’s system settings.

In very rare cases, a key combination is used. If you couldn’t get into the BIOS by pressing F2, most likely this is your case. Then, immediately after turning it on, press the Ctrl button and, without releasing it, press F2 several times. Remember that the screen prompting you to press a button and enter the BIOS can flash very quickly, so try pressing the key several times when starting your computer or laptop.

If you have new laptop or a computer and you have not yet installed the operating system, but cannot enter the BIOS by pressing Del, F2 or Ctrl+F2, then replacing the keyboard may help. Connect an external keyboard and try the above options again.

A component such as the BIOS on an asus laptop is an extremely complex memory component that monitors the general state of the entire computer and promptly informs the user about any problems in its operation. The abbreviation itself stands for basic input and output system. It is present on every laptop, regardless of model and country of origin. This is exactly what software Before starting the computer, it checks all its components, and if one of the components in the laptop is faulty, then it simply stops starting. Naturally, the user is not happy with this scenario, but the BIOS itself on the laptop works properly. After all, it was created to track problems with component devices.

How to access BIOS?

Answering the question about how to enter such a component as, I would like to note that absolutely all computers are individual. That is why each BIOS on a laptop starts differently and the question of how to enter it can only be explained superficially. If we look at the BIOS on a laptop in more depth, we will have to go through a lot of options before we can find the answer to the question of how to enter it.

So, what is the initial algorithm of actions when answering the question of how to enter the BIOS component:

Description of each action

For those who, for some reason, were unable to enter the BIOS, it makes sense to consider each step separately.

*When you turn on the computer itself, problems are unlikely to arise and the first step towards entering the BIOS will be overcome. In fact, anyone can press the power button.

Continuing to answer the question of how to enter this component, I would like to dwell in more detail on the second point. After all, it implies a fairly quick reaction, the absence of which may be observed among novice users. In order to press the appropriate button in time, you must carefully monitor the signals of the device itself, which will definitely show you how to enter. In particular, if you find a screensaver on the monitor screen with the motherboard manufacturer, which will appear in any case, you need to immediately press the button. And this, in fact, is the end of the question of how to enter this component.

The third point implies such a crucial moment as setting up this component on an ASUS laptop. Its configuration, of course, is not required at all, because the factory parameters are already set properly. And yet, in some cases, setting up some modules is simply necessary. For example, tuning the processor parameters module may be required when overclocking the latter to certain parameters. The setting can also come in handy when you need to set download priorities. In other words, make sure that the disk or flash card is loaded before the main system boot. It is in such cases that sometimes even detailed configuration of modules is needed.

Some important points when working with BIOS

As practice shows, the question of how to enter the BIOS cannot be called problematic, because there is nothing particularly complicated here. Of course, the average user may not be able to enter the BIOS, however, with proper mastery of the program, this process can be easily learned.

It also happens that you cannot enter the BIOS running on an ASUS laptop due to the lack of standard buttons in the settings for calling this component. In this case, in order to enter the BIOS, you need to try all the F buttons on the ASUS laptop. After all, the BIOS must be present on the laptop, so you can access it.

It should be noted that entering the BIOS is usually done only through the standard buttons listed above, and not only on an ASUS laptop. Naturally, as already noted, the laptop buttons for calling a component can be changed, but, as a rule, device manufacturers do not resort to this kind of upgrades, realizing that it will be much more difficult for users to configure modules in this case. That is why problems with BIOS practically do not arise, especially if we are talking about experienced users.

And, of course, I would really like to remind you that in this component you should not change the parameters of anything that is not clear. The fact is that BIOS is a rather complex and balanced system, where absolutely all components are responsible for some part of the computer’s support. It is not difficult to guess that if you change any module, all the others that depend on it may simply stop starting and ultimately the device simply will not boot. Naturally, no one needs such a development of events, because in this case you will have to take your device to special workshops that can. And this will cost its owner quite a considerable amount. Moreover, no one can guarantee that such a procedure will end successfully.

How to enter BIOS on an Asus laptop

First of all, start the laptop and check if the monitor is sending signals. If this is all right, then wait while the device boots up. According to standard methods, you can get into the BIOS by pressing the key F2 or Del.

Moreover, this needs to be done quickly, catching the moment before loading Windo ws and after loading the main screen. If you did everything correctly - start working - menu BIOS opened.

Please note that you should not change parameters that you personally do not understand. It’s better not to take risks, otherwise you can not only correct the system’s operation in an undesirable direction, but also cause the laptop to malfunction. As a rule, after this the device is subject to the intervention of specialists, and you will have to spend a lot of money on repairs. If your PC is not working properly, you can contact an official Asus laptop repair center.

If you were unable to get into the BIOS the first time

By the way, you won’t always be able to catch the moment when you need to press the button. Don't forget that the system will send you a signal that y you expect. When a splash screen image is detected on the screen motherboard company, hurry up and click on the appropriate button. If you didn't have time, you can try again by rebooting your device.

Features of entering BIOS on the OS Windows 8/8.1/10

You need to go to the settings options and select the item responsible for changing settings; it can also be called update and security. Next, select “reboot now” and select the diagnostic action. Next, go to additional parameters and menus BIOS will start when you select the itemUFFI Firmware Parameters.

Also, if you are unsure about the correctness of your actions, find the instructions for your model. Most likely, the manufacturer took care of a few words on the BIOS topic and indicated the correct way to enter the subsystem. If the above keys did not help you, then most likely you are entering the BIOS through one of the keys F, located at the top of the computer keyboard.

Hello everyone, dear friends! Just the other day I purchased a brand new ASUS laptop, in which I had to immediately update the BIOS. Therefore, in this article I would like to tell you how to update the BIOS on your laptop and why this procedure is performed on a new laptop.

So, sooner or later the time comes when we can no longer tolerate glitches and slowdowns in the operation of the operating system. Some users prefer to carry their laptop in service center, so that professionals can reinstall the system. Other users choose a more difficult path - independent reinstalling Windows. This article is dedicated to the second category of users. We will figure out how to update the BIOS on Asus laptops. The procedure requires 10-15 minutes, not counting the installation of the operating system itself. Rarely do laptop owners decide to update the BIOS on their own; usually the reason arises - an error that does not allow installing new version operating system. Most often this is error 0x000000A5. If you are well versed in computers, but have not encountered updating the BIOS, then immediately skip to the appropriate section of the article.

Today's material will cover the following questions:

— What laptops are the instructions suitable for?

— When is a BIOS update required?

- How does the process work? BIOS updates?

— What to do if the BIOS is new, but Windows 7 is not installed?

— What should you pay attention to before installation?

Reference! The abbreviation BIOS stands for Basic input-output system; in Russian this is translated as Basic input-output system. BIOS is a set of firmware that helps optimize the operation of computer components and also loads and installs the operating system. Here you can read the necessary information about the BIOS itself.

The basic system can even be seen on motherboard. Look at the photo, the tip of the screwdriver points to the BIOS chip.

For which Asus laptops is it advisable to update the BIOS?

The answer is simple - for those with an outdated BIOS. Typically these are ASUS X551 and X553 series laptops. This also applies to older models. In any case, the computer will automatically inform you that you will not be able to install a new version of the operating system on this BIOS. And he will do this with error 0x000000A5. We need to install a new BIOS version that will support ACPI, after which the error will disappear and you can safely install the desired version of the Windows operating system.

I will give an example of updating the BIOS on an ASUS X553 MA laptop. The update procedure follows the same scheme, so owners of other Asus models can also use my instructions. If you have a laptop from another manufacturer, then the only difference will be in the source of downloading the BIOS firmware. I will download it from the official Asus website, but you will need to go to the page of your laptop manufacturer.

What are the general reasons for updating the BIOS?

First of all, you need to check if your BIOS has an “OS Selection” option in the “Advanced” section. If it is not there, then you will need an update. In other cases, simply set this parameter to “Windows 7”, and this will complete the instructions for you.

The following are two main reasons for installing an updated version of the base system:

1. Error. The appearance of code 0x000000A5, which is accompanied by a blue screen of death. Most users switch to the updated version precisely because of this error. In some cases, owners of laptops with built-in Windows 8 or 10 cannot install more old version operating system, in this case updating the base system also helps.
2. Working with utilities. Some utilities are loaded not from the operating system, but from the BIOS, as happens with the installation of an operating system. For example, you can take the Acronis program, with which you can make adjustments to hard drive, change the number and size of disk partitions. There are a lot of such applications, and new versions require that the BIOS on your computer supports the ACPI boot format.

This is what the screen of death looks like with error 0x000000A5; as a rule, this is what reports outdated version BIOS.

The laptop has an updated BIOS, but the error still appears when installing Windows 7. What to do and what to do?

How to update BIOS on an asus laptop?

In this case, the cause of the error is incorrect settings for the “seven” in the BIOS itself. This is especially true for owners of laptops with more modern systems. You can fix the situation as follows (try installing Windows 7 after each step):

Let's start with the simplest thing - reset the BIOS to standard settings. To do this, we need to go to the “Exit” section and select the item called “Load Default Settings”, as shown in the photo below:

Has anything changed? Then try in the same section changing the position to “OS Optimized Defaults” from “Win8 64bit” to “Win7 OS”. The image below shows the process of changing parameters.

If you are trying to install an operating system from a flash drive, then you should check the parameter called “USB mode” in the “Configuration” section. Try changing the position from “USB 2.0” to “USB 3.0”.

IMPORTANT! If the reason was in the third step and you successfully installed the seventh Windows version, then after the installation is complete, go into the BIOS again and return the “USB Mode” parameter. Otherwise, USB 3.0 drivers will disappear, as a result, all USB devices will operate at reduced speed.

Updating the BIOS on an Asus laptop - step-by-step instructions

So, you went into the BIOS, opened the “” section for boot settings and did not find the “OS Selection” parameter there. In this case, we will need to update the BIOS. The required parameter looks like this:

To put latest version BIOS, you need to go to the official Asus website https://www.asus.com/ru /At the top of the screen you will see the products tab, select “Laptops” there and indicate your model in a special field.

We are interested in the X series, since this is where the 553 MA model belongs. You can always find out the series on the laptop itself or on the box. A window dedicated to our model appeared in front of us - select the “Support” section, and then click on the “Drivers and Utilities” button.

First, select the type of operating system; here you should put your option. After this, a list of categories with drivers will appear. Everything is simple here - click on the BIOS category, after which a tab opens with latest updates. We select the latest ones, in my case it is version 214. If you read the article later, you will have more recent drivers. In general, you need to choose the highest version.

Install Windows is better just from a flash drive, so the firmware files BIOS is better Just put it on a USB drive. Unzip the archive and place the contents in the root folder of the flash drive. We also need the “Start Easy Flash” utility, which is located in the BIOS. Perhaps you already have it. Otherwise, the utility will need to be downloaded; you will find it on the official website.

Insert a flash drive with BIOS firmware into the laptop and launch it. In the first seconds of loading, press the “F2” key on the keyboard to get into the BIOS. Here we are interested in the “Advanced” tab, so go straight to it. Here click on the “Start Easy Flash” button

Now you need to select the firmware file located on the flash drive. It will have exactly the same name as when downloaded. Press the “Enter” key to start updating the BIOS.

After this, a loading bar will appear on the screen; you just have to wait for the process to complete. Do not turn off the laptop while updating the firmware; it is recommended that it be connected to the network. Once the process is complete, the laptop will reboot. Go to the BIOS again and go to the “Advanced” tab. There is now an "OS Selection" option here. Click on it to set the installation mode to “Windows 7”.

If you are going to install the seventh version of the OS, you then need to go to the “Boot” section and select the media from which you will install the system.

If it is a flash drive, then the name will contain the word “USB”; if the disk is “DVD”. It looks like this (in my case a flash drive is used):

Now you can safely insert media from installation files operating system and proceed to install Windows 7. Don’t forget to set the priority to boot from hard drive, otherwise, the computer will try to boot from the flash drive every time.

As you can see, the update process is quite fast. In 95% of cases, updating the BIOS will help solve the problem with error 0x000000A5. You shouldn’t touch the rest of the settings; follow only the steps indicated in my instructions. Experiments may adversely affect the performance of your computer. Done, now you can fully use the seventh version of Windows.