Installing official firmware on LG G2. Installing official firmware on LG G2 Latest update of lg g2

Instructions for installing the official stock firmware (kdz file) on the LG G2 (D80x, F320x, LS980, VS980).

Drivers and programs

Attention!

Installation instructions

Do backups all user data and copy them to the PC.

Disable all antivirus programs on your computer, if available.

Put your phone into download mode ( Download Mode).
To do this, you need to turn off the device and connect it to the computer via a USB cable, while holding down the Volume Up button and releasing it when the “Download Mode” message appears.

• Run LGFlashTool2014.exe as Administrator and perform the following steps in the program:

  • In the drop-down list " Select Type» select value « CDMA».
  • In the drop-down list " PhoneMode» select value « EMERGENCY».
  • In the field " Select kdz file» specify the path to the previously downloaded firmware file.
  • Click on the “ Normal Flash"for flashing firmware without data loss or " CSE Flash"- firmware with reset to factory settings (all user data on the device will be deleted, including files on the internal memory).
  • In the window that appears " Read Phone Information» press « Start" and wait for the download to finish.
  • In the new window that appears " Select Country & Language» select country « Different Country" and language " English" If the language selection list is empty, leave it unchanged and click the “ OK" to start the firmware. The LG Mobile Support Tool will launch.

• Note:

  • If a message appears that the phone is disconnected from PC, you must disconnect it from the computer and reconnect it by holding down the Volume Up button (enter Download Mode) and try again.
  • Before the process is completed, it is not recommended to disconnect the device from the computer, after which the smartphone will be rebooted and the new firmware will already be installed on it, with which we hasten to congratulate you.
  • The initial launch usually takes for a long time, but no more than five minutes. If after this time the device is still “hanging” at boot, you need to reset the device to its factory state. To do this, you need to turn off the device, then turn it on while holding down the Volume Down key until the LG logo appears on the screen. Then release the Power button and press it again. Hold both buttons until the Hard Reset menu appears. To continue the action, you must press the Power Button or any of the Volume keys to cancel it. To confirm, press the Power Button again or press any of the Volume keys to cancel. The device will be reset and the internal memory will be formatted.

• share

Are you planning to flash your smartphone? We'll tell you how to update firmware on LG G2. Step-by-step instructions have been made for this.

Why update the firmware on your Android smartphone?

The reasons are different for everyone, the main thing is that in new firmware the manufacturer corrects bugs and shortcomings.

• There are problems with the front selfie camera; let’s say it takes pictures far from the quality indicated on the lens.
• Poor display response to touch.
• I would like to see the new Android Pie 9.0.
• Tired of it old version Android, I want to expand the functionality.
• The smartphone does not turn on or is terribly glitchy.
• The phone battery has stopped charging.

1. First you need to download the firmware by selecting one of the options below. Along with it in the archive is the necessary set of programs (TWRP and others).
2. Then extract the file “instructions_rootgadget.txt” from the archive. Using the archiver program...
3. Lying in the archive zip file The firmware must be downloaded to a memory card or smartphone memory.
4. For other information and sequence of actions, see the text instructions.

Firmware LG G2

• Android Pie 9.0 is a flagship OS, one might say, but still a little unfinished. URL: upfileget.info/android9pie
• 8.0 Oreo is an excellent option, with a minimum of bugs and rich functionality, but version 9 is certainly better. URL: upfileget.info/android8oreo
• 7.0 Nougat is a stable version in all respects, it works even on low-power hardware. URL: upfileget.info/android7nougat
• 6.0 Marshmallow - versions 5 and 6 are already really old, although they were once the pinnacle of progress. But if you switch to them from versions 3 or 4, then of course the difference is very noticeable. URL: upfileget.info/android6
• Android 10 URL: upfileget.info/android10

Root rights

If you want to get root access, you can use a universal program Rookthp Pro 3.2, download. Instructions for using the program can be found

Smartphone LG G2 D802 from the South Korean brand runs Android 4.2. Here you can get root rights, download official firmware and custom, as well as instructions. In addition, there is information on how to reset settings ( hard reset) or graphic key. This smartphone is high-performance.

Root LG G2 D802 32Gb

How to get root for LG G2 D802 32Gb see instructions below.

Below are universal programs to obtain root rights for devices on Qualcomm Snapdragon

• (need PC)
• (Root using PC)
• (popular)
• (root in one click)

If you could not obtain superuser (root) rights or the program did not appear (you can install it yourself) - ask a question in the topic. You may need to flash a custom kernel.

Characteristics

1. Standard: GSM 900/1800/1900, 3G, LTE
2. LTE bands support: 850, 900, 1800, 2100, 2600
3. Type: smartphone
4. Operating system: Android 4.2
5. Case type: classic
6. SIM card type: micro SIM
7. Number of SIM cards: 1
8. Weight: 143 g
9. Dimensions (WxHxD): 70.9x138.5x9.14 mm
10. Screen type: color IPS, 16.78 million colors, touch
11. Type touch screen: multi-touch, capacitive
12. Diagonal: 5.2 inches.
13. Image size: 1080x1920
14. Pixels per inch (PPI): 424
15. Automatic screen rotation: yes
16. Scratch-resistant glass: yes
17. Type of ringtones: polyphonic, MP3 ringtones
18. Vibration alert: yes
19. Camera: 13 million pixels, built-in flash
20. Camera functions: autofocus, digital Zoom 8x
21. Video recording: yes
22. Max. video resolution: 1920x1080
23. Max. Video frame rate: 60fps
24. Front camera: yes, 2.1 million pixels.
25. Audio: MP3
26. Voice recorder: yes
27. Headphone Jack: 3.5mm
28. Video output: MHL
29. Interfaces: IRDA, USB, Wi-Fi, Wi-Fi Direct, NFC, Bluetooth 4.0
30. USB host: yes
31. Satellite navigation: GPS/GLONASS
32. Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, HSPA+, email POP/SMTP, email IMAP4, HTML
33. DLNA support: yes
34. Processor: Qualcomm Snapdragon 800 MSM8974, 2260 MHz
35. Number of processor cores: 4
36. Video processor: Adreno 330
37. Built-in memory: 32 GB
38. Volume RAM: 2 GB
39. Memory card slot: absent
40. Additional SMS features: text entry with dictionary
41. MMS: yes
42. Battery type: Li-polymer
43. Battery capacity: 3000 mAh
44. Talk time: 34.40 h
45. Standby time: 800 h
46. A2DP profile: yes
47. Sensors: light, proximity, gyroscope, compass
48. Search by book: yes
49. Exchange between SIM card and internal memory: There is
50. Organizer: alarm clock, calculator, task planner
51. Contents: phone, PC connection cable, charger, instructions
52. Peculiarities: sound system- 24bit x 192kHz Hi-Fi Sound; camera: two-way shooting, sapphire crystal, multi-point autofocus, 360? spherical shooting, optical image stabilization; glass

Review of LG G2 D802 32Gb

Many people are wondering: is it worth changing LG2 to LG3 and is it once outdated? flagship smartphone? I will say right away that there is no point in changing much, since the G2 model is still very productive and has a high-quality camera. As for the display, it is juicy and bright, it’s pleasant to watch movies, and it is possible to connect a flash drive via OTG.
The disadvantages include the assembly; squeaks appear over time (some elements of the case may come off).
In general, the smartphone is still usable and you can take it: yes, you shouldn’t wait for updates, as I understand it, but you can upgrade to custom firmware (to update to Android 5.0), then the smartphone takes on a new life, seriously. However, without the proprietary interface from LG, the feeling is not the same, so it’s better to leave it and not use the stock one (in this case, it’s true, no joke).

»

Firmware for LG G2 D802 32Gb

Official Android 4.2 firmware [stock ROM file] -
Custom firmware LG -

Firmware for LG G2 D802 32Gb can be done in several ways. If the firmware file has not yet been uploaded here, then create a topic on the forum, in the section, specialists will help you and add the firmware. Don’t forget to write a 4-10 line review about your smartphone in the subject line, this is important. The official LG website, unfortunately, will not help solve this problem, but we will solve it for free. This LG model has a Qualcomm Snapdragon 800 MSM8974, 2260 MHz on board, so there are the following flashing methods:

1. Recovery - flashing directly on the device
2. A special utility from the manufacturer, or

We recommend the first method.

What custom firmware are there?

1. CM - CyanogenMod
2. LineageOS
3. Paranoid Android
4. OmniROM
5. Temasek's

1. AICP (Android Ice Cold Project)
2. RR (Resurrection Remix)
3. MK(MoKee)
4. FlymeOS
5. Bliss
6. crDroid
7. Illusion ROMS
8. Pacman ROM

Problems and shortcomings of an LG smartphone and how to fix them?

• If the G2 D802 does not turn on, for example, you see white screen, hangs on the screensaver or the notification indicator only blinks (possibly after charging).
• If stuck during update / stuck when turned on (needs flashing, 100%)
• Doesn't charge (usually hardware problems)
• Does not see the SIM card (SIM card)
• The camera does not work (mostly hardware problems)
• The sensor does not work (depends on the situation)

For all these problems, please contact

With 5.2 inch screen and Full resolution HD, was liked by many. All I read in the reviews is continuous oohs and aahs from the authors who really like this pipe. And there really is something like that in her! But that's not the best part.

It was previously reported that at the beginning of 2014, but already on December 26, an update to . After all, this is a flagship, and therefore the latest firmware is guaranteed! Moreover, the Nexus family is also made by LG today, which means it has access to the latest Google developments.

But with Android 4.4 for LG G2, the situation is still not so ideal. Officially, the update is only available in South Korea for the version of the smartphone designated F320K. D802 released for the rest of the world. However, for LG G2 owners who want it right now, below are the instructions for flashing Android 4.4.x KitKat stock and custom firmware.

Installing/restoring native (stock) firmware on LG G2

We need:

• download drivers;
• download ;
• download ;
• download .

Note: This method Suitable for all LG G2 phones except AT&T and Version. I hope there are not so many such “Americans” in our country;).

Installation of native (stock) firmware (Android 4.2.2). Method one

And now step by step instructions on how to flash LG G2 to Android 4.4:

1. download the necessary firmware (the firmware file must have the extension *.KDZ);
2. download and install drivers;
3. download (you just need to launch and close);

1. turn off your smartphone and log in download mode(bootloader) mode: hold down the Volume UP button and connect the USB cable (enter download mode);
2. after that download and unpack, then run the file UpTestEX.exe;
3. in the window R&D Test Tool:

• Select Type = 3GQCT(top left side);
• PhoneMode= Diag(upper right corner);
• Select kdz file= Select your stock firmware (.KDZ);
• click the button Normal web upgrade test(bottom right);
• then a pop-up window will appear, click Upgrade Start;
• wait a few seconds, another window will pop up Select Country & Language;
• Country- depends on the firmware (select the one you need);
• Language- Depends on the firmware (select the one you need);
• press OK to start the firmware.

We wait for the firmware to finish and check the firmware version.

Note. After the firmware if received Boot Loop(cyclic reboot), do Reset. To reset the settings, turn on the phone with the Volume Down button pressed.

Actually, that's all. Not difficult, right? And it works stably. Although, of course, we still have to wait for the official Android firmware 4.4 for LG G2 D802. Then things will be more fun!

Installation of native (stock) firmware (Android 4.4.2). Rollback from Android 4.4.2 to 4.2.2. Method two

Note: This method also suitable if, when starting the firmware, the message “You are using latest version BY..."

After downloading the required firmware file (the firmware file must have the extension *.KDZ), downloading and installing the drivers, you must:

• Engineering menu: 3845#*802#;
• Safe Mode: with the phone turned off, Power button -> wait until the LG screensaver -> press Volume Down (volume down);
• Reset settings: Turn off your phone. Press and hold the Power + Volume Down keys until the LG splash screen appears;
• Unlock code SIM: 2945#*802# .

In short, take risks and share your experience in the comments!