HDD Regenerator: functionality and use of program capabilities. HDD Regenerator: How to properly use the hard drive recovery program Version 1.71 of the hdd regenerator program how to use

Hello, today we will talk about how to use the HDD Regenerotor program, how it works and what it is all about. So, let's move on to the instructions...

The software product is intended for testing and repairing hard drives, restoring their operation if this does not happen entirely correctly. able to cope even in the most difficult cases. The probability of this is more than fifty percent.

How the program works with data recovery on a hard drive

Pulses in the form of high and low level signals are generated and methodically sent to the damaged surface of the hard drive area. As a result of these influences, a process of magnetization reversal of the disk occurs. This process helps in restoring sectors that become inoperative due to incorrect disk magnetization processes.

Correction system errors on the hard drive occurs without affecting user information. As a result, the data on the disk will not be affected in any way and will not be damaged.

Download the program HDD Regenerator quite possible in the free version - distribution software product completely free (easily found on the official website or on).

Most popular versions:

• 2011;
• 2015;
• 2016.

After we have downloaded the software to our computer, we run the file in the archive with the name “ Read me" It should be read and accepted as instructions for use, which describes the software installation process. In the same archive you can find patch c serial number(key) and localization (rus).

Instructions for working with the HDD Regenerator program

After the installation process of the program is completed, an icon with a logo will appear on the desktop HDD Regenerator. Double-clicking on the icon will launch the program.

A window appears on the computer monitor asking you to scan the hard drive and also create bootable USB flash drive, disk.

Let's move on to the restoration work: you need to click on the image with the button " Regeneration" The button is located on the top panel of tabs, then in the list that drops down, click – “Run process for”.

The next window prompts you to select to begin restoring it. It can be visualized by such quantitative parameters as capacity and number of clusters.

Pressing the " Start"("Start Process") causes a window to appear with an information message about the use of disk space by software already running on electronic device. To continue the recovery process, you must close all open software and processes.

When the window shown below appears, click on the “ Retry».

This will cause a window typical of DOS to appear on the monitor screen.

1. Carry out diagnostics of the hard drive and continue restoration work;
2. Perform diagnostic operations and display data upon completion;
3. Restore certain sectors of the hard drive;
4. Display statistics.

After a normal scan, the program will offer to correct the errors found, select item “1”.

In the next window, indicate which sector you want to start scanning the disk from; we recommend starting from “0”.

Many of us are familiar with the situation when using a computer becomes problematic due to the fact that your hard drive suddenly refuses to work correctly. The most common option is the so-called bad sectors, which cannot be read. One of them is the HDD Regenerator program.

Purpose of the program:

1. Diagnosis of software faults, treatment of bad blocks.
2. Diagnostics hard drive() and real-time condition monitoring.
3. If the OS does not boot due to errors on the HDD, you can quickly burn a bootable USB flash drive and bring the hard drive into working condition.

Quite often the cause is disk failure. The above program is designed specifically to fix this problem.

Download the program installer, install and launch. By the way, latest versions– paid, but there is always an opportunity download demo version, which works with restrictions.

Before starting the program for the first time, be sure to disable everything running applications, including antivirus. Otherwise, the operation of HDD Regenerator may be incorrect or completely impossible. The program will warn you if you have not disabled everything and you can correct your mistake

The program interface is simple and clear. After launch, you must scan your hard drive by clicking the appropriate button.

Once the process is completed, you will see a list of all the logical drives of your PC. Select the disk to scan and click “Start process”.

It must be said that all actions will be performed in the window command line, so you will need a basic knowledge of English. But even if you don’t have them, it’s okay!

There are only four items in the menu: scanning with recovery of damaged areas, normal scanning (without “treatment”), recovery of sectors in a separate section of the disk, and display of statistics after scanning is completed.

To select an item, you need to enter the corresponding number from the keyboard and press “Enter”. Then we calmly wait until the program completes its work.

After the scan is completed, you can view the statistics:

• number of “bad” sectors [B]
• number of recovered [R]
• and newly found damaged sectors [N],
• and also about total number"bad" sectors [R]

When the trial version of the HDD Regenerator program encounters a bad block, it becomes clear why the program is paid. She cures the first one, and to restore the rest you need to pay for the full version.

On some sites you can find information that the program is unique and “surface magnetization reversal.” This is not true, the program does not do anything supernatural. It simply overwrites poorly readable sectors many times. As a result, soft bads will be overwritten, and for more complex ones the standard Remap procedure will be launched.

The program is quite suitable for treating Soft-Bad blocks, but considering that there are good free analogues, it's better to use them. For example, or.

Hard drive, also known as HDD, is the most valuable space on a computer, because... this is where everything is stored important information. The hard drive, unfortunately, is a rather fragile thing, so problems with it can arise, and quite often. If it happens that your hard drive is damaged, do not panic, because it can be restored using the HDD Regenerator program, which I want to tell you about today.

HDD Regenerator is a fairly well-known program that specializes specifically in restoring damaged sectors of the hard drive. The program is successfully used not only by ordinary PC users, but also by service centers.

The main difference between HDD Regenerator and other similar programs is that it remagnetizes a bad sector, restoring it, and not hiding it, as other programs do.

Getting started.
You can try HDD Regenerator by downloading trial version programs at the link at the end of the article.

Once the file is downloaded, install and run the program.

Before starting work, be sure to close all programs that access the hard drive during operation ( antivirus programs, search indexing, etc.).

First, the program must carry out a scanning process to evaluate state of hard disk. Select the button in the top window indicated by the arrow in the screenshot below.


A new window will open in which a list of disks that can be scanned will be available. Select the required one and click the “Start process” button.

If you haven't closed any background programs, HDD Regenerator will display a warning. To continue scanning, you will have to close the remaining programs that are interfering with the program.


Next, a command line window will appear in front of you, where there are 4 actions to choose from:

1. Scan with recovery bad sectors;

2. Regular scanning without recovering bad sectors;

3. Recovering sectors of a specific area of ​​the hard drive;

4. Show statistics after the recovery process is complete.


To scan with the recovery process, select the first option. In my case, I will select the second option to scan without recovery. To select an item, you need to navigate to it using the arrows on the keyboard and select it with the Enter key.

Next, you need to indicate which segment of the hard drive will serve as the start of the scan. After this, the program will start working.

After HDD Regenerator is completed, the program will display results, including the number of recovered sectors, segments that cannot be restored (this may happen) and other valuable information.

Thus, the program, due to its capabilities, copes with its task perfectly, and it can be safely recommended to users for high-quality hard recovery disk.

The hard drive is not a forever component computer system. Unfortunately, sooner or later it fails. The reason for this is demagnetization, as a result of which bad sectors appear. But what to do to extend, or even completely, the hard drive? According to many experts, one will help with this simple program, that’s what we’ll be talking about today. To be more precise, the article will tell you how to use HDD Regenerator 1.71, but it’s worth clarifying right away that the guide is also suitable for other versions of the application.

Testing

Since the developers of the program position it as a tool for restoring bad sectors of a hard drive, it would be reasonable to start an article on the topic “How to use HDD Regenerator” directly with this function. However, it would not be entirely correct to do this, because there can be many reasons for a drive malfunction. It is for these purposes that software There is a S.M.A.R.T testing function. This is one of the most reliable disk diagnostic systems, so it is recommended to use it before starting to “repair” the drive.

1. Launch the program.
2. On the top panel, click on the section called S.M.A.R.T.
3. Wait for the diagnostics to complete.

As a result of a fairly lengthy analysis, the program will show you the status of the hard drive. If no problems are identified with it, then you will see the inscription “OK”. If it is different, then you can be sure that the problem lies in bad sectors and you need to use the option to restore them.

Disk recovery

We will continue the guide on how to use 2011 directly from main feature program - the ability to restore bad sectors of the hard drive. In fact, this procedure is quite time-consuming, so be patient and do not miss anything.

1. Launch the application.
2. On the top panel, click on the Regeneration section, which translates as “Recovery”.
3. In the section menu that appears, select the Start Process under Windows option.
4. Immediately after this, a window will appear in which a list of hard drives installed in the computer will be displayed. All you have to do at this stage is select required hard disk and click the Start Process button.
5. A window with a pseudo-graphical interface will appear. For some users, working in it is not very comfortable, however, using the instructions, you should not have problems with this.
6. To begin the recovery process, enter the number “2” from the keyboard and press the Enter key.
7. In the next menu, you must press the key with the number “1”, and then Enter. This will start the process of scanning bad sectors and then restoring them.
8. Now you need to indicate from which sector you want to check. It is best to check the entire disk, respectively, starting from scratch. To do this, enter the number “1” in the window and press Enter.

Once you have completed all the steps described above, a recovery progress indicator will appear on the screen. It is with its help that you can track how many bad sectors were detected and how many of them were recovered. All that remains to be done is to wait for the scan to complete.

Creating a bootable USB flash drive

From the Regenerator guide, you already know how to recover bad sectors. This is the main function of the program, however, not the last. With its help, you can create a bootable USB flash drive so that in the future you can download some program onto it to run it directly from the drive.

1. Open a program window.
2. Insert a USB drive into the computer port.
3. While in the main menu of the application, click on the Bootable USB Flash button.
4. A new menu will open, which will display a list of detected flash drives connected to the computer. Select your flash drive from the list and click OK.
5. A new window will appear telling you that the operation will erase all data from the drive. Click OK to start the operation.

It doesn't last very long. Immediately after completion, the program will notify you about this, after which you can copy the program to the flash drive to launch it from the BIOS.

Creating a boot disk

Instructions on how to use HDD Regenerator would not be complete if it did not tell you how to create boot disk. In general, this operation is not much different from the previous one, but to complete the picture we will talk about it in detail:

1. Launch the program.
2. Insert a CD or DVD into your computer drive.
3. Click Bootable CD/DVD in the main menu.
4. From the list of detected optical drives, select the drive you just inserted and click OK.
5. Wait for the process to complete.

Now you fully know how to use HDD Regenerator. Of course, there are several more items in the application that were not discussed, however, they perform a mediocre role.

Conclusion

So we figured out how to use the HDD Regenerator program. As can be noted, despite the fact that the developers position it as a recovery application performance of the hard disk, it contains others no less useful features. You can easily use it to create a boot disk, flash drive, or test the drive. In general, the program is very useful and it is recommended to install it on your computer immediately so that you can influence the operation of the computer at any time.

We will tell you about in a simple way, how to recover damaged sectors using the HDD Regenerator program from Windows 10 and previous versions.

This version of HDD Regenerator can recover bad sectors (bad blocks) from under Windows any versions and bit depth. The program allows you to work with several hard drives simultaneously, as well as with portable USB drives.

Recovering a hard drive using HDD Regenerator

Attention: connect disks that need to be restored only after downloading operating system Windows and do not use them while the program is running.

The first thing you need to do is HDD Regenerator, run the program as an administrator and, by clicking on the “Regeneration” menu, select “Start Process under Windows” from the list (run from Windows)

If the program asks you to switch to “IDE mode” and reboots, then click the “No” button, since your Windows system may not start in IDE mode.

Then a new window will appear with a text menu for the HDD Regenerator program. Using the number keys we will select the necessary actions. Select 2. “Normal scan” and press “Enter”

In the next window we are asked to select the operating mode of the program. We are interested in “Scan and repair” (scan and restore). To do this, select item 1 and press “Enter”.

In the next window, select “Start Sector 0” (start scanning from the very beginning of the disk), press 1 and then “Enter”.

After these steps, the disk scanning and recovery process will begin. Red letter " B"The damaged sectors will be marked with a green letter " R"Recovered sectors will be marked, and sectors with a read or write delay will be marked with a white letter "D".

After scanning, you will be shown a window with the results of the work: the number of damaged and restored sectors, as well as sectors with delays.

Important:p take care of uninterruptible power supply the computer on which you will restore data.

The HDD Regenerator program perfectly restores damaged sectors on hard drives, but we strongly recommend that you save all the valuable information from the recovered hard drive and do not use it in the future, as it may fail at any time.

The official website of the program is located.