Tunngle takes a long time to set up. Fixing the error: “failed to initialize the Tunngle network adapter

I want to say right away that my friends and I have not encountered this problem when installing games via Tunngle, but still, if you have these problems, then read carefully these instructions, which was found on the Internet.

A very important point when playing through Tunngle. A closed port means potential problems with communication, in particular with establishing a connection (You simply may not see from 2-3 to a dozen people in the room)

1. Is it necessary?
Indeed, let's first figure it out - do we need to configure anything, or does everything work on its own?

Launch Tunngle, go to System > Options
In the “Router” section, find the “Test” button
Now, if when you press this magic button, Tungle swears something like “selected port does not apear to be opened”, then it needs to be opened. If you are told “selected port is opened and accepting connections”, then you can safely skip the following points.

2. Setting up the router
To begin with, I’ll note that you can set almost any port in the tungle settings, but there are two caveats: the value must be greater than 1000 (since tungle blocks all ports from 1 to 1000 so that all sorts of smart people don’t get into your system) and if Do you plan to use Tungle on two or more computers in one local network, then each computer needs to select and configure its own port.

The easiest way to open a port on your router (or ADSL modem) is to find out the manufacturer and model and do everything according to the guide.

If you have the wrong firmware/configured by a neighbor/something of your own (underline as necessary), I will try to clearly explain what and where to poke.

First, you need to find out the IP of the router modem and the IP of your computer. This is done simply: in network connections right click on “local network connection”, “status”, “details” button. Your IP Address is the “IP Address” item (IPv4 in Vista 7). Here even a fool can understand that the IP address of the router modem is the address of the gateway (the default gateway or something else in the same spirit). Usually 192.168.0.1 or 192.168.1.1

Now we can go to the web interface of the router modem and configure this miracle as we please. Open your browser and simply write the IP address of the router modem in the address bar. (for example, like this – http://192.168.0.1/)
A window may pop up asking for your login and password. If you don’t know it (how so? Your device is... O_o), then try the default ones, for example admin admin, or just admin without a password (but it’s still worth reading the documentation for this shaitan box, such moments are covered there)

Then the fun begins. Here I will describe only general cases, because... There are too many details, and it’s impossible to write about everything at once. (a huge variety of router modems are reviewed on portforwarding.com)

Typically, port forwarding is hidden in sections like Virtual Server or the wilds of NAT configuration
We are interested in redirecting traffic from your external IP address (i.e. what goes from the Internet to the router modem) to your internal IP address (from the router modem to your computer), the port here is the same (the one you specified in tungle settings)
On some models, the external IP address is omitted and does not need to be specified, which is quite logical.
Next, you need to specify the IP address to which the redirect will go, ports (external and internal), and protocol type - UDP. As you can guess, you should write the IP address of your computer and the ports that are in the tungle settings.
Also, on some models you can set a work schedule by hour or day based on another created rule. It’s better to put “Always”, and don’t forget to enable it (check the box somewhere, if possible) and confirm the changes made.

3. Setting up a firewall
Here I will not chew on what and how. If you were smart enough to install and configure it, it would be enough to allow Tungle network activity.

I will only note that you should add Tungl to the exceptions of the Windows firewall and cunning antiviruses (such as Kaspersky and Nod32).
You need to add two files – Tunngle.exe and TnglCtrl.exe (they can be found in the folder C:\Program Files\Tunngle)
Well, add the Tunngle network to the trusted/allowed ones, or whatever it’s correctly called...

P.S. If you don’t have a router or an ADSL modem, and the tungla complains about NAT settings, most likely you don’t have your own external IP. Most providers provide this service (for a small additional fee), so to play normally you will need to order it.

Can wait extremely unpleasant surprise– when trying to start the program, it gives an error and refuses to work. In this situation, you should simply reinstall everything again, but even after that, the situation very often repeats. So you need to understand the problem.

Error “Install incomplete please download and run” speaks for itself. This means that some kind of failure occurred during the installation process of the program, the application was not installed completely or incorrectly, and therefore cannot work.

In some situations, the program may even partially work, but it is extremely limited - you can click on the tabs and enter the settings. There is no connection to the Tunngle server, and game servers are also unavailable. However, in most cases, the application still turns out to be completely inoperative.

There are several reasons for this failure, and each of them requires a specific solution.

Reason 1: Computer protection

This is the main reason why Tunngle installation fails. The fact is that during this process the Master tries to gain access to the deep parameters of the system and network adapters. Of course, many computer protection systems perceive such actions as an attempt by some malware to interfere with the operation of the computer. And therefore, blocking of such actions begins, during which a variety of installation program protocols can stop. Some antiviruses completely block the installation and quarantine the installer file with no choice.

There is only one result - you need to install it with the computer's security system turned off.

Now all you have to do is follow the instructions of the Installation Wizard. When finished, you need to restart your computer. Everything should now work.

Reason 2: Download failed

A relatively rare cause of failure. The fact is that in some conditions the Tunngle installer file may not work correctly due to the fact that it has not been downloaded completely. There are two main reasons for this.

The first is a banal interruption of the download. Not entirely relevant, since modern download protocols do not make a file available until the end of its download is confirmed, but exceptions also happen. In this situation, you need to download the file again, after making sure that there is enough space in the save directory free space.

The second is, again, the activity of the protection system. Many antivirus programs scan saved files during the download process and may block the download before it is completed or prevent the download of certain items. Be that as it may, before downloading again, you should also disable your antivirus and try again.

It is important to note that you must download Tunngle only from the program’s official website. Given its ability to gain access to network adapter settings, many scammers use this application in a modified version to access the user’s personal data. Typically, such a fake program gives an installation error when launched, since by that time it usually already has a connection to the computer through an open port. So it is important to use only the official Tunngle website. Above is a verified link to the official website of the developers.

Reason 3: System problems

In the end, various computer system problems may interfere with the installation of the program. Typically, these are various performance problems or virus activity.

1. First, you should restart your computer and try installing the program again.
2. If nothing has changed, then you need to check your computer for viruses. It is likely that some of them indirectly interfere with the installation of the program. The main symptom of such a problem may be failures when using other software, as well as problems when trying to install anything.
3. Next, you need to perform a comprehensive cleaning of your computer. It is also important to close or delete everything unnecessary files and programs. The goal is to free up as much free space as possible to make the system work easier. Poor performance may be fraught with violations during the installation procedure of the program.
4. It would also be a good idea to check the registry for errors.
5. After all these steps, it is recommended to defragment the computer, and especially system disk, on which Tunngle is installed. Fragmentation can also, in some cases, prevent the system from functioning correctly.

After all these steps, you should try to launch Tunngle. If the result is the same, then you should perform a clean reinstallation of the program. After this, everything usually starts to work, if the problem really was in the performance of the system.

Conclusion

In fact, according to statistics, in most cases a simple clean reinstallation is enough to solve the problem. All of the above measures will only be useful in case of more complex violations and other problems. As a rule, after this Tunngle starts working correctly.

If anyone doesn’t know, the Tunngle application is a unique cross-platform program that allows you to play all kinds of games using an Internet connection online. However, despite the apparent ease of installation, quite often the problem arises that Tunngle does not start. Why this happens and how to deal with it will now be discussed.

Why Tunngle won't start: possible problems

As for possible failures when installing and using this software package, there can be many reasons for the occurrence of numerous failures, such as the inability to detect a virtual network adapter or errors related to access rights.

Most experts associate the situation and such failures when the Tunngle adapter or the application itself does not start with “clumsy” hacked Windows (in particular, “Seven”), incorrect installation of the game package, system firewall or antivirus restrictions, incorrect data in the adapter and router settings , finally - with problematic device drivers necessary for the program to work. In general, there are enough reasons. Let's look at each of them in more detail.

What to do if Tunngle doesn't start? Correct installation

Let's start with the installation itself. software product. Everything here seems to be simple, but some nuances are still worth taking into account.

Let’s make a reservation right away so that a problem does not arise when Tunngle does not start on Windows 7, for example, you should pay attention to the fact that it is advisable to install the latest version of the application, and specifically for installed system. And these are builds of Tunngle 5.6 and higher.

In addition, you must first register on the official resource on the Internet using a verifiable login and password (they will be useful during operation), although you can register during the installation process.

After running the installer file, we agree with all warnings and accept and agree with the installation of the equipment. In general, standard procedure. It is important to know that upon completion of the process, you must reboot the system, otherwise activating the application will not be possible (the installer itself will prompt you to reboot).

But seemingly correct installation in some cases does not guarantee that a failure when Tunngle does not start will not appear even when the application is launched for the first time. The reason for this is the lack of correct configuration of some network components.

Tunngle adapter settings

So, Tunngle does not start on the computer (nothing happens). What does this mean? As a rule, this indicates incorrect configuration of a newly installed virtual adapter. To correct the situation, we proceed in the standard way.

To begin with, we use the standard “Control Panel”, and in it - the section of the network control center and shared access. Here you need to change the Tunngle settings a little. Right-click to open an additional menu where you select a tab additional parameters. Please note: there must be a “bird” opposite the line indicating the automatic metric. In addition, you need to set it to the topmost position (use priority).

Setting up router ports

An equally common problem, when Tunngle does not start without an error, may be the use of an already occupied port on the router (you can see it in the application itself or in the adapter settings, and then enter the same value in the router settings).

Setting up exceptions

In addition, the installed port should be added to the so-called firewall and antivirus exclusion list.

Quite often access is blocked at this level. In other words, the connection through this port using a virtual adapter is regarded as unreliable with a possible attempt at external access.

Creating a game server

If this helps either partially or does not help at all, and Tunngle does not start in any of the options described above, pay attention to the application settings.

Even if there is an error, it's okay. In the program interface, first you need to create a game server, exit the application, then reboot the system again and see how the program will behave in this case.

Problems with program updates

Sometimes the situation may be related to updates to the software package itself. As mentioned above, version 5.6 and higher should be installed on the system, since it is the one that is the most “normal” in operation.

IN as a last resort, you can use the application interface menu and then select the scan new version and updates exactly to it.

Problems updating drivers

But problems with outdated drivers, and not only the main network adapter or graphics video accelerator, can be attributed to the most, so to speak, global ones. The saddest thing is that in Windows OS the function automatic search and device driver updates are simply not provided, and it is not possible to determine that any driver needs to install updates.

In this case it is better to use third party programs, for example, the utility Driver Booster, but only, again, it is desirable latest version. Once the program starts, it will begin the scanning process and identify absolutely all devices that need driver updates.

It is worth noting here that it is better, of course, to update drivers for all equipment without exception, since the Tunngle program during its operation accesses not only video, audio or network devices installed in the system, but also some others.

Correcting system errors

Another problem, when Tunngle does not start at all, may be a banal presence system errors in Windows itself. It goes without saying that correcting them manually is a thankless task, especially since inexperienced users It is highly not recommended to go into the registry and change any keys or delete entries.

Ideally you can use something like this powerful utilities, such as CCleaner, Advanced System Care and many others. True, it is better not to install the standard one, but to use portable version. This is only due to the fact that some “cleaners” by default can use their own built-in Internet connection optimization module or turn on turbo acceleration, which can also quite often provoke communication disruptions.

Instead of a total

Thus, based on the foregoing, the user must pay attention to several mandatory conditions in order to work normally with the program:

• using the latest version of the program;
• correct installation with mandatory registration;
• correct adapter and router settings;
• availability of the latest updated versions of device drivers (even virtual ones);
• using a list of exceptions in blocking programs for the installed software package and specified ports.

Otherwise, I think there will be no difficulties with installing and configuring the application. As a last resort, if nothing helps at all, first you need to make sure that the computer configuration matches the declared system requirements or remove the application entirely and then install it again.

The only thing you should pay attention to when uninstalling is the use not of a standard Windows uninstaller, but of more powerful tools like iObit Uninstaller, which is capable of cleaning both residual files and system registry keys.

It may be necessary in some cases to Windows update, but, as practice shows, exclusively at the level system components. Security update packages for performance this application do not have any special impact (all the same, the program and ports through which connections to game servers are made are included in the list of firewall exceptions).

Well, as for working with a normally functioning program, this is a separate issue. However, it will not be difficult to understand the interface, available games or game rooms, especially since the software package itself supports a huge number of game servers around the world, which are available in any region, regardless of the geolocation of the user who installed and uses this package.

Tunngle is a popular program that is designed for playing various games online. The program is interconnected with many games, so very often there are problems with launching Tunngle, or errors with the operation of games through this software.

Tunngle error 1-101, 1-102, 1-103 or 1-104

First of all, make sure you have the latest version of Tunngle installed. After installation, do not forget to restart your computer, otherwise the functionality of the program is not guaranteed.

Go to “Control Panel”, then “Network and Sharing Center”, select “Change adapter settings”. Right-click on Tunngle, select properties and go to the Advanced section. There will be “Automatic metrics”, make sure there is a checkmark next to it.

Another cause of errors may be the use of an already occupied port; try changing the port of your router.

(4-109): Could not find initialize the Tunngle network adapter

The Tunngle network adapter cannot start. If you get this error, then you need to reinstall Tunngle.

First, completely uninstall the program. Restart your computer. Then, before installation, add the installer to the exception of your antivirus program.

Tunngle doesn't work on Windows 10

The problem is solved by updating the tangle. Starting from Tunngle version 5.6 and higher, the program works correctly on Windows 10.

What to do if nothing helps?

You need to do some work on your system. We suggest doing this using two useful programs.

1. Update drivers with Driver Booster. This is really cool software that often helps. Updating old drivers to new ones is one of the key requirements for the normal functioning of games and programs on a computer.

You might think that Windows always alerts users when new updates are available. That's right, it shows alerts, but only for updates for Windows and the video card. But besides this, there are many more drivers that need to be updated regularly.

2. PC repair with Reimage Repair. Run this program to analyze your system for errors (and there will be 100% of them). You will then be asked to cure them, either individually or all at once.

The Tunngle app is quite interesting and powerful tool, created to unite Internet users of the World Wide Web who prefer online computer games with real opponents, similar to how championships are held. However, quite often after installing this software package, the program begins to display a message stating that Tunngle cannot be initialized. Why this happens, what is the reason for such failures, how to deal with all this, will now be considered.

What is Tunngle?

It’s worth noting right away that the Tunngle software package itself is quite specific. The fact is that even the standard installation and official registration do not guarantee normal operation of the application.

And it was created so that users of the World Wide Web could access online games of any genre using their own Internet connection. Naturally, none of the avid gamers will deny themselves the pleasure of playing with a real opponent. A this program allows you to do all this literally in a couple of clicks (but only if correct settings). But sometimes the problem is that the system simply “spits” and reports that it was unable to initialize network adapter Tunngle.

What is it, and why does the system not recognize it or does not want to accept the default settings? Let's look at this problem from the point of view of the most common situations.

How does the installer work?

Firstly, in systems Windows type 7 and higher, you need to run the installation file exclusively as an administrator. Otherwise (even if the system request is confirmed), the functionality of the application is very difficult to guarantee. The problem may lie precisely in incorrect installation.

Secondly, you should not pay attention to the registration that the standard installer offers during the installation process. It is better to initially register on the official resource and confirm your login and password. This is followed by the standard process of installing and copying files, after which the installer will prompt you to reboot the system (without this, activation of the application is impossible).

Let’s make a reservation right away: the error when it was not possible to initialize the Tunngle network adapter (4-109) is most often associated with separate registration at the first stage. If this has been done, you should either skip this step or enter the correct access data. Unfortunately, problems arise if you enter user data during the installation process. So it is better to enter the necessary data with confirmation initially, using the official resource.

Why does the application create a virtual adapter?

Now let's look at the problem where the Tunngle network adapter (4-109) cannot be initialized. What to do in this case? Yes, just pay attention to its settings. The fact is that by default the system, as such, simply does not perceive it. It is not surprising, because it represents the host through which the connection is made.

This may be reminiscent of the principle of music VST plugins in the form of dynamic libraries and virtual drivers such as ASIO4ALL, which virtually work in the same way. In other words, during the installation process the program creates a network access device, ignoring the “hardware” communicator. In principle, it is even placed on top of it. In the access settings, you can only assign priority to it, making sure to enable virtualization in the BIOS.

"Unable to initialize Tunngle network adapter" error: Possible problems

Typical errors are considered to be: incorrect installation, lack of updating the system and device drivers, incorrect settings of network and router parameters without port forwarding, blocking by the “native” and so unloved Windows firewall, and even worse, an anti-virus scanner. You never know.

The easiest way to fix the problem

At this stage, we will proceed to a practical solution to the problem when an error or failure occurs due to the fact that the system was unable to initialize the Tunngle network adapter (4-109 - error code). It is quite simple to restart your computer or laptop after completing the installation process and integrating the application into the system. But, really, in automatic mode subsequent activation and configuration, performance is not guaranteed. And here's why.

Correct installation

Installation is not all that needs to be taken into account. Registration also plays a significant role. The problem here is that the server itself does not accept inherently hackable passwords like “123456789.” This approach is primarily associated with the 256-bit encryption system used.

Therefore, when registering, be careful - you will have to enter letters, numbers, and intermediate symbols, which will ensure the reliability and safety of the created account.

Ports

The saddest thing is that after installation the program does not set the parameters of the same IPv4 protocol in its own way. The system, in principle, does not allow the program to register its parameters in the Internet connection settings. You can, of course, try to register a port like 6000, although you shouldn’t count on it.

It is better to look at the application interface, where in the top panel you can find a default port that is not used by the system. If the port is enabled, the address will be indicated in red. However, you can change its parameter, whether in the program, or in the settings, or in the data of the router or any other router, quite simply.

Exceptions

Another point related to the fact that the system was unable to initialize the Tunngle Windows XP network adapter. For example, this may concern a stricter system for filtering incoming data by an antivirus or the standard firewall of Windows itself.

This dual approach to security seems extremely far-fetched. However, if the system reports that the Tunngle network adapter could not be initialized, at the “post-installation” stage you can add the application itself and the ports used to access the main game servers to the so-called exception list. In other words, the firewall will ignore this connection.

It is especially worth paying attention to software packages such as those that involve cleaning and protecting the system from Malware, Adware or Spyware threats.

Error 4-109 (“Tunngle network adapter failed to initialize”): What to do first?

Taking all of the above as an example, you should immediately pay attention to the removal of all kinds of optimizer programs that seem to clean the system and speed up the connection, but in fact only slow it down by loading their own modules into RAM and mercilessly using disk space resources in the form of virtual memory (page file).

Next you should delete old version Tunngle, if it has been installed, then download the latest update, but not lower than version 5.6, install the application again, following the recommendations indicated above.

What does the TCP/IP protocol have to do with it?

But that's not all. The main problem when the system fails to initialize the Tunngle network adapter is that the IPv4 or v6 protocol settings, if such technology is supported by the provider, are incorrect installation main parameters. Moreover, this concerns not internal and external IP addresses, but DNS servers.

In the virtual adapter settings, you must check the box next to the automatic metric field. And the saddest thing is that almost no one knows these parameters.

But, as it turns out, everything is simple. If the user suddenly sees a message or system notification that the Tunngle network adapter could not be initialized, there is no need to be upset.

It is possible that the system itself, its updates, or the device drivers installed on it do not meet the program's requirements. It is enough to install the latest updates for the system (as a rule, these are KB series packages for the security system), as well as use non-standard means of updating device drivers.

For these purposes, it is better to use specialized programs like the latest version of Driver Booster. The update will be performed completely automatically, and for all devices simultaneously (and this is important, since the application itself addresses not only video or audio equipment or tries to access the use of software codecs and decoders).

What else should you pay attention to?

Note that sometimes the problem when the system failed to initialize the Tunngle network adapter may not even be related to it, because it is, in fact, a virtual device, not a hardware device.

Here you should use built-in or non-standard diagnostic tools that can identify those running in the system. virtual devices similar to how VST standard music plugins are scanned.

Now there is no point in dwelling on them in detail. But if the system still writes that it was not possible to initialize the Tunngle network adapter, it is worth looking at the configuration of the gaming PC (you never know, the processor is not the same, there is not enough memory) or set some inflated parameters to help overclock the same processor in the BIOS, or do this manually. But! Without special knowledge on this matter, you can only do this out of your own conviction, since even the most knowledgeable experts do not guarantee that the system will then be able to operate normally (or whether it will be able to do so at all).