What to do if your iPhone won't turn on? How to activate and set up a new iPhone How to turn on a new iPhone se.

However, first we have to figure out why exactly it refuses to turn on. Basically, there are only a few reasons why an iPhone might not work. The first lies in a completely discharged battery, and the second lies in a software failure. Let's look at each of them.

Dead battery on your iPhone? No problem!

If your favorite device has a low battery, you need to:

1. connect it to the adapter and charge for about 15 minutes (some devices require charging for half an hour);
2. then you should try to turn on the gadget without removing it from the socket;
3. if everything is in order, an empty battery icon with a lightning bolt inside will appear on the display (this is a signal that charging is in progress and the device will soon turn on).

Sometimes, if the iPhone does not turn on even after charging, you can see on the display an icon of a low battery, a socket, and also an arrow pointing to a lightning bolt. This means that the battery is completely discharged, so it needs extra time for recharging (about several hours).

If the reason is a software failure: what to do?

In case of a problem with the software, the gadget needs a hard reboot. To do this, you will need to hold down several buttons on your iPhone at the same time: Power and Home. They must be held in a clamped state until the Apple logo appears on the device screen. It will signal the start of the reboot. Then the gadget will begin to function as usual.

It should be noted that such a reboot can be carried out if a particular program has frozen and the smart device has stopped responding to button presses.

The above troubles and their solutions are standard, but if suddenly none of the instructions brought results, most likely the smartphone was susceptible to one of the following problems:

• the battery has become unusable;
• the connector to which the charger is connected is damaged;
• There was an error related to the firmware.

For all of the above problems, it is better to contact a specialist. service center, since it will be quite difficult to solve them yourself. Although, as you know, the impossible simply takes more time.

The new iPhone, just like the iPad with iPod touch, requires activation. After you turn it on for the first time, iOS's friendly interface will start asking you about your preferences in various settings. Our article will help you gain confidence in choosing the answers and activate your iPhone without any problems.

Step 1: Turn on your device

Step 2: Enter your country of residence and preferred language

Step 3: Select geolocation settings. It is not necessary to enable geolocation right away; this can be done after activation by going to Settings -> Privacy -> Location services

Step 4. Set up a Wi-Fi connection to complete the activation process. If you can't use a wireless connection, insert the SIM card into the iPhone tray and select Use mobile data

Important! An iPhone cannot be activated using a Wi-Fi connection distributed from a mobile device.

Step 5: Wait for activation to complete

Step 6: Select iPhone setup type. There are three possible options here

• Use as new iPhone(suitable for those who bought their first iPhone and have not yet used iTunes and iCloud)
• Restore from iCloud copy (option for users who want to use the settings and set of applications of their old iPhone, synchronizing them over the air)
• Restore from iTunes copies(the choice is similar to the second point, but the restoration will be carried out when iTunes Help while connected to a computer)

Step 7: Sign in with your existing Apple ID or create a new one. This step you can skip it, but it is recommended to create an identifier right away

Step 8. Accept the user agreement

Step 9: Set up iCloud settings, Find My iPhone, iCloud Keychain, password protection, and the ability to send diagnostic data from your phone

Step 10: Complete iPhone Activation

That's it, your iPhone is activated and you can start using the device to its full potential.

More iPhone topics:

• Authorizing your computer in iTunes
• How to post photos from iPhone or iPad online
• Where are iPhones made?

Please rate this article 5 stars if you like this topic. Subscribe to us Telegram, VKontakte , Instagram , Facebook , Twitter Viber Zen , YouTube.

Please rate:

If you are a person who has never used an iPhone before, or have been familiar with Apple products for many years, the first thing you need to do with the new iPhone X, iPhone 8/8 Plus/7s is set it up. Once purchased, setting up and activating your new iPhone is very easy, and there are many ways to do it. Below is information on how to turn on iPhone X, iPhone 8/8 Plus/7s/7s Plus correctly?

Before installing and activating iPhone X, iPhone 8/8 Plus/7s, there are a few steps you need to take to avoid potential problems.

First, create a backup of your old device.

There are 3 ways to make a backup so you don't lose data when switching to a new iPhone.

1) Backup using iTunes

Connect your old iPhone to iTunes and click the "devices" icon. In the Summary panel, select Backups.

2) Backup using iCloud.

IN old versions iPhone go to iCloud > Storage & Backup > iCloud Backup > Backup.

4.You can turn location services on or off at your discretion.

5. Set up Face ID, as well as Touch ID with your finger, as shown in the photo below.

6. Enter the 6-digit passcode to secure your iPhone X/8/8 Plus.

7. Choose to restore from iCloud/iTunes backup or set it up as a new iPhone device.

8. Sign in with your previous Apple ID, or create a new ID if you have not used iPhone smartphones before.

9. Read the terms and click “Agree.”

10. Add information about Apple map Pay.

11. Go to Settings > Siri & Search and make sure the “Hey Siri!” and "Siri Home Button" are enabled.

12. Adjust sensitivity touch screen by clicking on it.

13. Determine whether application diagnostics and analysis information should be shared with Apple developers.

14. Choose how to view your new iPhone: standard or zoomed.

15. Click “Start”, the iPhone installation and activation is now complete.

Activate your iPhone using iTunes

In this method, you will need a working SIM card inserted into the SIM card slot during the activation process.

Connect the appropriate device to the computer where iTunes is installed. Create a backup, delete all content, and reboot your device. Then disconnect the device from the PC, and connect it again to the PC with via USB. Select an option to activate your iPhone. The system will prompt you to enter your Apple login and password.

Follow the activation instructions. Once you are done setting up, remove the SIM card. You can now use your iPhone wirelessly.

How to activate new iPhone X/8/8 Plus without SIM card

If you don't currently have a SIM card or the SIM card is not supported, you can use iTunes to activate your device. It may not work when the network is blocked.

1. Connect iPhone X, iPhone 8/8 Plus/7 to iTunes and it will automatically recognize your device.

2. Select "Set up a new iPhone" in the pop-up window and click "Next" to continue.

3. Follow the instructions to set up and activate your device.

However, if you receive the message “There is no installed SIM card you are trying to activate” from iTunes, it means your iPhone is locked. You can ask friends for a SIM card to activate it, or contact your carrier to unlock your iPhone.

Common problems when setting up iPhone X/8/8 Plus

During the setup process, a small number of users may be unlucky in activating their iPhone X/8/8 Plus. If you are one of these lucky ones, don't worry and try the methods below:

1. Check if Wi-Fi connections are available.

2. Check if your SIM card is damaged or installed correctly.

3. Wait for connection to Apple Server.

4. Reboot your new device.

5. Set up your new iPhone X, iPhone 8/8 Plus/7 using iTunes.

iPhone X stuck on activation screen

1. Restart iPhone X, iPhone 8/8 Plus/7 and try setting it up again.

2. Enter and exit recovery mode using free .

Can't restore iCloud backup when setting up

1. Wait for the Apple Server to respond.

2. Make sure you are connected to Wi-Fi.

3. Make sure iOS is compatible with iPhone X, iPhone 8/8 Plus/7s is the same version with your old device you used for backup. Update iOS 11 to the same version.

4. Use iCarFone or iTunes instead of iCloud to retrieve files backup copies. Compared to iTunes, one dominant advantage of iCareFone is file preview and selective recovery back to new iPhone X, iPhone 8/8 Plus/7s.

5. Contact service Apple support for help.

If you still have questions, write a comment, we will definitely help you.

Users often ask how to activate the iPhone 5 and 5S, because many different necessary functions appeared on the iPhone for the first time. What applications to install, how to set up service services, how to password-protect them or register with them, how to run diagnostics after purchase, what settings can be allowed, whether it is necessary to provide access to the iPhone, how to set up the iPhone - many questions arise for a beginner.

In this article we will tell you how to activate a purchased iPhone 5S, how to set up an iPhone 6, including how to activate an iPhone 4 and 4S, and for some cases, we will describe how to activate an iPhone 6. The purpose of this topic is to set up an iPhone and avoid installing unnecessary applications, perform the correct algorithm of actions and avoid mistakes after purchasing a new iPhone.

In order to launch correctly new iPhone the first time, you need to prepare and follow some activation rules for the setup procedure in order to avoid unnecessary errors.

Before you turn on your iPhone for the first time, you need to determine whether it has a sufficient charge level. In particular, activation on iPhone 3GS, iPhone 4S should occur when there is 20% charge, and activation on iPhone 6 or iPhone 7 - when the charge is at least 30%. Also make sure you have high-speed WI-FI Internet or iTunes installed on a laptop or computer. Yes, and don’t forget about a SIM card or Nano-sim. Please note that if the iPhone is locked, activation will not work without the SIM card of the locked iPhone.

If you see that your iPhone is completely discharged, you can first recharge it by connecting it via USB cord to a computer or in the usual way. If iTunes is not installed on your PC, then download it from the official website iTunes.apple.com, and if available, then update it to the latest version.

How to activate iPhone 4S and 5S from scratch

So, let's begin the process of activating and setting up a new device, which consists of several stages: connection, initial settings, connecting to a laptop and activation, as well as turning on for the first time.

Connection

TO How to enable a new phone? To turn on the iPhone, hold down the Power key on the top end of the smartphone for a couple of seconds until the Apple logo appears.

Initial settings

A screen will open in front of you on which you will see greetings from Apple in many different languages, then swipe at the bottom from left to right to select your language, for example, Russian. Next, you need to select your country, for example, Russia.

Turn on Wi-Fi on your iPhone by first entering the connection password, or connect the device to a computer with iTunes and the Internet.

iPhone 4S activation

In order for the iPhone to be activated correctly via a laptop or computer, you need to prepare USB cable, with which we connect two devices. “Location services” will appear on the iPhone display, which need to be turned on or off. They will come in handy when Google connection maps or GPS. What exactly to do and how to enable it?

First you will have to accept the license agreement by activating the Agree button at the bottom right. You can also activate your iPhone 6 on this service or deactivate the location service. You can activate it and then disable it in unnecessary applications. The geolocation function consumes a lot of iPhone battery power and, accordingly, reduces the time battery life iPhone.

Activation of iPhone 5 and 5S

Further, for owners of versions starting from iPhone 5S to iPhone 7, activating the “Set Up Fingerprint” function becomes the same mandatory procedure, for which you need to activate the “Set Up Now” key and make a fingerprint scanner . In this case, your finger should press the multifunctional “Home” button about 10 or 20 times. After that, a picture with your fingerprint will appear on the iPhone display. Setting up Siri on an iPhone 5S or iPhone 7 is quite simple, just run this installed application on your iPhone and follow the next steps.

Now you need to diagnose the connections on the iPhone 7. To do this, you need to decide whether to allow various services access rights to your iPhone 7 to send data to the Apple server. For example, data about program errors can be sent to the server. What to do? If you do not want to send any data, then click the Don’t Send button.

After successful setup, the iPhone 5 se will greet you: “Welcome to iPhone ! Thus, the initial activation of the iPhone is completed. Activation of iPhone 6S and iPhone 7 is performed in a similar way.

Setting up an Apple ID

One of the important stages of the initial setup of an iPhone is setting up and registering an Apple ID, with which you can register in various mega-important applications, such as cloud storage iCloud data.

To register your Apple ID, you can use different ways. We will tell you how to register an ID for free using the program App Store. We launch this program and select any application that is free, for example, social network, which you usually use, and download the application to your iPhone. Next, the “Login” window will appear with the entries “With existing Apple IDs” and “create an Apple ID”. If you have a registered ID, then launch the activated one by clicking on the first button. If you have not previously registered an Apple ID, then click on the “create Apple ID” item.

Then select your country and agree to the terms of service, which are set out on 66 pages. Now the most important thing is to create a password of eight or more characters, in which at least one letter must be capitalized, at least present 1 number, while it is prohibited to use several identical numbers or letters in a row, and the number should not be easy to guess, and of course, be unique.

When the system asks for payment information, click “No” and enter your address information, filling out all the lines, including selecting a greeting, Security Question and your backup mailbox and the main activated mail email, to which, after registration, you will immediately receive an activation letter. By following the link in the letter, confirm the activation of your Apple ID.

What mistakes should not be made when activating an iPhone?

One of the most common mistakes during activation is that you bought it but forgot to remove the special protective film, which blocked the Home key, so I could not activate it correctly; the finger scanner was not read due to the presence of film on the button.

Another common and more serious mistake is due to the lack of WI-FI connections I logged in for the first time through my computer, but I was in a hurry and forgot to update iTunes, so the activation was incorrect. And for some users iTunes update it doesn’t work and an error message comes because this program was open during the update and needs to be closed.

Another far from minor mistake is the quick agreement of the iPhone buyer to have the seller set up your iPhone and create an Apple ID for a small fee. He, of course, is always happy and it’s clear why. But you should not fall into euphoria about a relatively cheap service. What will you do then when the seller does not tell you the control words of the question during registration or completes the registration with some errors? This won't show up right away, but you'll encounter it later when the ID won't turn on. Therefore, activate the purchased iPhone only yourself, writing down all passwords and keywords for memorization.

Be sure to keep the purchase receipt and the box itself, which will definitely be needed if your iPhone is stolen or lost.

When purchasing in a store, sellers offer to turn on and run iPhone 5 for free. But for some reason I didn’t want this service.
The fact is that when other people do similar work for you, the question of how to set up iPhone 5 remains a mystery to you. Until, say, you buy a new gadget. But when else will this happen?!

You can turn on and set up iPhone 5 for the first time in three ways:

1. Recover from iCloud copy
2. Recover from iTunes copy
3. Set up like a new iPhone

But this is in theory, and in my version, when you purchase a device for the first time, and there is no data saved anywhere from previous similar gadgets, there is only the third option from among the above to set up iPhone 5, as they say, from scratch.

True, after such an initial launch, I then had to manually copy all the contacts from the address book of the old Nokia into the new iPhone. But that’s a completely different story, that was later.

1 We decisively turn on the new iPhone 5

Let's return to the initial launch of the iPhone 5. First, connect the charger to it and make sure that the device's battery is not completely discharged. Otherwise, you need to charge it first, preferably up to 100%. On the screen when connecting iPhone to charger An image of the battery appears, and the numbers show the charge level - an intuitive picture that does not require much explanation.

And so, turn on the power, press the button turn on iPhone. The initial “Hello” prompt appears (Fig. 1).

Note. This is not the greeting that the baby elephant lost and did not convey to the monkey in the famous cartoon “Hello to the Monkey”:

• “When I say hi, I’m sending you a good mood,” the boa explained.
• And now Monkey has a “hello” and a good mood.
• Oh, if only two more “hellos”…”

The iPhone has a completely normal hello, which means that the device is starting to prepare for the initial setup.

Rice. 1. The initial greeting is not in Russian after turning on the iPhone for the first time

The greeting “Hello” now appears again, but in understandable Russian (Fig. 2).

Rice. 2. The initial greeting is in Russian after turning on the iPhone for the first time

Again, tap on the intuitive “Configure” inscription at the bottom of the screen (Fig. 2).

A warning appears that we do not have a SIM card in our iPhone (Fig. 3). Here we answer “OK”, and we don’t have any options for choosing an answer - this is the only possible option: tap on “OK” (Fig. 3).

Rice. 3. Warning about the need to insert a SIM card into the iPhone to connect to a cellular operator

The SIM card, which the iPhone initial setup program warns us about, is needed so that the iPhone can be immediately connected to the network mobile operator.

To be honest, I didn’t want to do this right away without understanding the initial settings of the device. Because you can rashly, without understanding it, inadvertently download something from the Internet during the settings, and then receive and pay a decent bill from the mobile operator. Why do this if, which can distribute, say, a laptop, and which in turn is connected to an unlimited wired Internet– download as much as you want without restrictions!

2 Understanding languages ​​and countries

After refusing iPhone connections to the cellular operator’s network, select the language of communication with our device. I suggest doing this in Russian, unless, of course, you want to learn another language, for example, Chinese, at the same time as working on the iPhone! Tap on the inscription “Russian” (Fig. 4)

Rice. 4. Selecting the language for communicating with iPhone

Next, in the device settings, we are asked to select the country and region where we are located. It would seem why, since we have already indicated the language in which we will work with the iPhone. But not everything is so simple and obvious. After all, you can, for example, be abroad of the Russian Federation, but at the same time consider Russian the preferred language for communicating with the iPhone. Therefore, selecting a language and selecting a country and region are separate device setup operations (Fig. 5).

Rice. 5. Selecting the country and region where we are located

In Fig. 5 it is clear that Russia is not in the selection menu. Of course not, because Russia is spelled with the letter “R”, and we see in Fig. 5 only countries starting with the first letter of the Russian alphabet, the letter “A”. Therefore, we swipe up the country and region selection menu until we reach countries starting with the letter “P”. There we will see Russia, and tap on the name of our Motherland.

Rice. 6. Selecting Russia as the country and region for initial iPhone setup

By the way, I wonder how the choice of country is made if you select Chinese as the language of communication with the iPhone. After all, this language does not have an alphabet, so it is unclear how the countries are located there, in what order?

As far as I know, the organizers of the 2008 Summer Olympics, which took place in China, faced the same problem. After all, on the opening day of the Olympics, countries must pass one after another in the strict sequence of the alphabet of the language of the country where the Olympic Games are taking place. But this is also a completely different story. We're going back to the beginning iPhone settings 5.

And now a warning about the absence of a SIM card appears on the screen again (Fig. 7). And there is no Wi-Fi, that is, the device is not connected to the Internet, and therefore cannot be configured further. As they say, we have arrived...

Rice. 7. Repeated warning about the absence of a SIM card because there is no connection to Wi-Fi

3 Connecting iPhone to the Internet via Wi-Fi

We put the iPhone aside for a while without turning it off. And we start working on the Wi-Fi network - we try to launch Wi-Fi distribution using a laptop. But here an unexpected problem arises. My laptop's Internet access point has a very complex and long password. This was done by the laptop manufacturer to protect the access point from unauthorized connection. And I did not change this password.

But entering this password manually is simply impossible. No one has ever been able to do this without making mistakes. The password can only be copied and transferred, say, inside a file, to a mobile gadget. But transferring any data to our brand new iPhone is not yet possible, because it has not yet been launched.

What to do? The idea of ​​creating an access point using another gadget, using a smartphone, comes to the rescue. Fortunately, a smartphone can become an Internet access point for other devices. And here we can easily, let’s say for a while, make the password for accessing the Internet network simple and easy to enter using a virtual iPhone keyboards.

Of course, now we have to agree that we will spend mobile traffic smartphone connected to a mobile operator. You could immediately insert a SIM card into your iPhone. But we will take comfort in the fact that we will thus still try the operation of the device from Wi-Fi networks, and not immediately from the SIM card of the cellular operator. Let's practice, if I may say so.

After a few minutes of waiting iPhone screen comes to life. And the first proposal to launch geolocation services appears (Fig. 11).

Rice. 11. We refuse the offer to launch a geolocation service

There is no need to start these services during the initial setup; it is never too late to do this later, when the iPhone is configured and starts working. Therefore, we will refuse to launch this service, for which we will tap on the inscription “disable geolocation services” at the very bottom of the screen (Fig. 11).

5 Create an iPhone password

The next step in the initial setup of the device is to create and enter a password to access the iPhone. Since creation given password the device cannot be reached without this password. Therefore, you need to be responsible when creating a password. On the password entry screen you will be prompted to enter this password for the first time using a telephone keypad with numbers and Latin letters below them (Fig. 12).

Rice. 12. Entering the iPhone password

It is better to make the password only from numbers alone, since using letters will complicate the entry. If someone is confident in using a telephone keypad, they can also include Latin letters in their password. I repeat, I created a password of only 6 digits. And that’s a lot, it was possible to make a shorter password, for example, from 4 digits like a PIN code.

Then you need to re-enter the password to make sure that the password was entered correctly (Fig. 13).

Rice. 13. Re-enter your iPhone password

The entered password now needs to be remembered or even written down! Remember forever, for the entire time you use your iPhone.

6 Setting up programs and data on the new iPhone

Now it is finally time to customize the software and data of our iPhone. You will be asked to configure them in several ways (Fig. 14).

Rice. 14. Selecting options for setting up iPhone programs and data

We choose the “Set up as a new iPhone” option, as we decided, since this is our first device and we don’t have any old copies in either iCloud or iTunes. And there is no need to transfer them from Android, which regularly distributes Wi-Fi to us, since neither programs nor contacts are needed from it, since this is not my personal device.

So, select the “Set up as a new iPhone” option, tap on this inscription and wait until all the necessary settings are completed. But this is not the end of our “torment.” We will continue to configure the iPhone and prepare it for work.

7 Opting out of setting up an account to access Apple services

What a strange thing! For some reason, developers consider their users to be very advanced. Sometime at dawn personal computers at Windows setup Quite meaningful questions were asked, understandable for a Russian person, and at the very end of the setup a question suddenly arose about a certain page 866. Where does it come from, what is it? There are no explanations, but for the life of me, out of the blue, I need to configure it. And no reasonable explanations.

Then it becomes clear, after some time, that we are just talking about consent to the use of the Russian alphabet when working with Windows. Well, then why not just ask, do you want Russian letters on your computer, or do you not need them? It is absolutely clear that we must answer this question, of course, “Yes, yes, yes, and yes again!”

So for some reason, the developers of Apple devices are sure that everyone in the world knows what an account for accessing Apple services, or “Apple ID,” is. And at the next step of the initial setup of our gadget, they offer this account configure (Fig. 15).

Rice. 15. Proposal to set up an account for access to Apple services, Apple services

The most remarkable thing is that all these settings can be done quite easily later, when our iPhone is working. When setting up the gadget, you don’t need to enter accounts or anything like that.

We need to start the device, and not try to configure a lot of things on it instead. Therefore, let’s refuse this “attractive” offer and tap on the inscription “Configure later in Settings” (Fig. 15 - here they even explain to us where we can make the missed settings)

Despite the possibility of refusing the Apple ID settings, our gadget will be “surprised” at this reckless decision of ours, in the opinion of the iPhone. And we will be asked again about refusing to use this option (Fig. 16).

Rice. 16. Repeated offer to set up an account to access Apple services

And here we firmly answer “no!”, for which we tap on the inscription “Do not use” (Fig. 16).

8 Acceptance of terms and conditions

Abroad, in countries of developed capitalism, actions related to legal rules and restrictions are very developed. Citizens of these countries are almost never too lazy to read a dozen pages of small, close, tooth-breaking text about what can and cannot be done with anything:

• with a microwave: is it possible to dry a cat in it?
• with washing machine: Is it possible to wash dogs in it?
• and the like.

I agree that it is important to know this, to know exactly what is possible and what is not. Know what the manufacturer guarantees and what it doesn’t. But for some reason not yet in our country. Well, we don’t read these agreements! Perhaps someone is reading, I won’t talk about everyone. But the majority of our citizens are still not interested in legal subtleties.

I will not comment on this or define it. That's it, that's all. But our iPhone is clearly not Russian. Therefore, before starting to work with it, we are asked to read the terms and conditions, and. If you do not agree with these provisions, the device will not operate. Therefore, we have no choice as such. Regardless of whether you have read or not read the terms and conditions.

Rice. 17. Acceptance of terms and conditions

9 Refusal from Siri

It would seem that this is happiness, we have accepted the terms and conditions - we can begin work. But that was not the case. We will now be asked to enable Siri.

Siri is an interactive system that allows you to control your phone using your voice, which first appeared in iPhone models 4S. This means that it is also on our fifth model. But, again, Siri can easily be turned on later, once our iPhone is working. Therefore, let us also refuse this invitation by tapping on the inscription “Turn on Siri later (Fig. 18).

Rice. 18. Refusal to turn on Siri

A reasonable question arises: why are we offered all this during the initial setup of our gadget, if all these settings can be done later. The answer looks quite simple - these are just marketing moves by the iPhone manufacturer or its partners developing software for its operation. Nothing more.

The manufacturer believes that we are poorly informed about the capabilities of the device, and perhaps the manufacturer is right in this. But the manufacturer does not understand or does not want to understand that it is not so easy for us to master everything right away. Everything needs to be done in order. First set up iPhone 5, and only then learn everything about it limitless possibilities.

However, the manufacturer thinks differently, and thus we have to refuse various options again and again, leaving their launch and study for later.

10 Sending diagnostics

The hardware and software of mobile gadgets is constantly being improved. Manufacturers sometimes install new elements and new programs into these devices at their own peril and risk. And they do not always have time to test all this in the quiet conditions of their research laboratories.

This is due to competition. If you test for a long time and do not bring the product to the market, you may be late, and the market will be occupied by “foreign” products. So you have to take risks.

And since there is a risk, it means that there may be malfunctions in the operation of the device. To fix these glitches, iPhone developers are also patching special programs. These programs “catch failures”, somehow systematize them a little, and can send information about them to the manufacturer.

Modern manufacturers are very fond of the information they receive about all the failures that occur, as this allows them to constantly improve their hardware and software. Therefore, we are offered to set up either automatic sending of information about any failures in iPhone work to the manufacturer, or refuse this option.

Here you can advise both sending information and not sending it. Do not send the better, who will use the iPhone in mobile networks, and spend limited limited and rather expensive Internet traffic. You can send to those who will use the gadget more often, working via Wi-Fi and unlimited traffic.

Skeptics may argue that mobile networks sending diagnostic messages does not consume significant volumes. Yes, of course it is. Until one day you receive a bill from mobile operator and you see very unusual figures, say, the cost of the Internet when roaming abroad. After this, most often there is no desire to AUTOMATICALLY send or receive any unnecessary messages through mobile Internet.

Therefore, in this case, we will refuse (just in case) from automatically sending diagnostic messages to Apple. To do this, tap on the “Do not send” inscription at the very bottom of the screen (Fig. 19).

Rice. 19. Opting out of automatic sending of diagnostic messages

11 The long-awaited start to work on iPhone 5

And now, after all our numerous consents and refusals to enable/disable certain options of the new iPhone, we get the opportunity to start working on it. The message “Welcome!” appears on the screen. and the “Get Started” invitation.

We tap on this “Get Started” inscription (Fig. 20)

Rice. 20. Initial settings completed, we are asked to get started on iPhone

That's what we've been waiting for! Patience and work will grind everything down. We can start working on an iPhone, install a SIM card in it, enter data into the address book, make calls, send SMS, etc. The question “how to set up iPhone 5” was successfully resolved, hurray!

You'll see icons on the screen that let you do a lot of things on your iPhone. But that's a completely different story...

How to activate iPhone via iTunes

For those who are ready to activate their new iPhone through iTunes, we can advise you to do the following.

First you need to download iTunes software from the official developer website (the most latest version). Download the application according to the installed one software on the computer.

Install the application, connect the iPhone to your computer (a cable for this is included with the phone).

The phone must be fully charged, and the SIM card must be in its place (in the appropriate compartment).

Connect the Internet on your computer.

Accept the terms of the license agreement, then continue the device activation process. Now proceed to filling out the required data. Double check them and click on “Submit”. The program will then automatically send the entered information to Apple. This activates both the warranty and the phone.

Mobile iPhone phones It’s better to buy at Apple stores or special electronics stores to avoid problems with further activation of the device. Avoid dubious retail outlets, do not buy a phone second-hand or over the Internet from little-known sites.