How to disable the Windows 7 account password. Disable the password requirement

Setting a password on your computer is intended to ensure more reliable security of information on it. But sometimes, after installing code protection, the need for it disappears. For example, this may happen because the user managed to ensure that the PC is physically inaccessible to unauthorized persons. Of course, then the user may decide that it is not very convenient to always enter a key expression when starting the computer, especially since the need for such protection has virtually disappeared. Or there are situations when the administrator deliberately decides to provide access to the PC to a wide range of users. In these cases, the question becomes clear: how to remove the password. Let's consider the algorithm of actions to solve the problem posed on Windows 7.

Resetting the password, as well as setting it, is done in two ways, depending on whose account you are going to open for free access: the current profile or the profile of another user. In addition, there is an additional method that does not completely remove the code expression, but does not require you to enter it at login. Let's study each of these options in detail.

Method 1: Removing the password from the current profile

First, let's consider the option of removing the password from the current account, that is, the profile under whose name you are currently logged into the system. The user does not need to have administrator privileges to perform this task.

Method 2: Removing the password from another profile

Now let's move on to the issue of removing the password from another user, that is, from a different profile under which you are currently performing manipulations in the system. To perform this operation, you must have administrative rights.

1. Go to the section "Control Panels" which is called "User Accounts and Security". How to perform this task was discussed in the first method. Click on the name "User Accounts".



2. In the window that opens, click on the item "Manage another account".



3. A window opens with a list of all profiles that are registered on this PC, with their logos. Click on the name of the one from which you want to remove the code protection.



4. In the list of actions that opens in a new window, click on the item "Deleting a password".



5. A password removal window opens. There is no need to enter the key expression itself here, as we did in the first method. This is because any action on another account can only be performed by an administrator. At the same time, it does not matter at all whether he knows the key that another user has set for his profile or not, since he has the rights to carry out any actions on the computer. Therefore, to eliminate the need to enter a key expression when starting the system for the selected user, the administrator just needs to click the button "Remove password".



6. After performing this manipulation, the code word will be reset, as evidenced by the absence of a status indicating its presence under the icon of the corresponding user.

Method 3: Disabling the need to enter a passphrase at login

In addition to the two methods discussed above, there is an option to disable the need to enter a code word when logging in without one. complete removal. To implement this option, you must have administrator rights.

In Windows 7, there are two methods for removing a password: for your own account and for another user's account. In the first case, it is not necessary to have administrative powers, but in the second, it is necessary. At the same time, the algorithm of actions for these two methods is very similar. In addition, there is an additional method that does not completely remove the key, but allows you to automatically log in without having to enter it. To use the latter method, you also need to have administrative rights on the PC.

Windows 7, like its predecessors, can require users to enter a password when logging into the operating system to ensure confidentiality and storage of user information. This solution is appropriate when you work in a large office, or if unauthorized people have access to your computer. But what should you do if this is a home device and constantly entering a password causes you inconvenience. Therefore, how to remove the mandatory password entry in Windows 7?
It's actually very easy and quick to do! There are several options for this

Option one: Click Start - Control Panel - User Accounts - Select the desired user- Enter the current password - Click to delete the password.

Option two: Start - Run - Enter “control userpasswords2” - In the open window, uncheck “Require username and passwords”

Option three: Start - Enter the word “password” in the search bar - Select change in the prompt Windows password- select the desired user - Enter the current password - Click delete password.

So, We see that there are many quick options on how to remove the password in Windows 7, but still make sure that a few seconds of your time is a sufficient price for the lack of security of your personal data.

Good day, dear readers, Denis Trishkin is in touch again.

IN latest versions For security purposes, operating systems from Microsoft provide the ability to set a password to enter the work area. If this tool is no longer relevant, you can disable it. I will tell you how to remove the password in Windows 7 in several ways. After all, constantly entering secret characters sooner or later gets boring. This is especially irrelevant when only one person is working at the computer.

Many users store information on their computer that only they should have access to. If only one person uses the device, this is not a problem. But in the case when another may approach him, certain difficulties may arise.

Windows provides a special tool that restricts access to data by setting a personal key. For example, parents often use this tool to prevent their children from seeing content they are not supposed to see. In addition, this way you can protect yourself from changing your personal settings.

Disable password( )

There are several ways to turn off key entry. Each of them implies that you are the owner account, which needs to be updated. The first means that the password is known and the user has administrator rights.

It allows you to quickly deal with this problem:

That's it. Now, when the system starts, you will not be prompted to enter a secret key.

Important! However, if you change your account or go to the lock screen, you will still need to enter your password.

You can remove the annoying function using the standard menu “ User Accounts" True, in this way it will not be a shutdown, but a complete deletion. Despite this, Password will not be asked under any circumstances, even after resuming from sleep mode.

To disable the protection tool, do the following:

That's it, now the system will not ask “stupid questions” regarding security in this area.
Here you can also create a secret combination of symbols.

Interesting to know! When installing a key, experts recommend entering large and small letters in different languages ​​and also adding numbers. The length must be at least six characters. Only in this option can at least some security be guaranteed.

Resetting the network key( )

Probably all computer users know what a network is. It is a connection between two or more devices that allows the exchange of information. The younger generation is familiar with this concept, as games can be played together through this method.

But what should you do if, after connecting the machines, a window appears to enter the network password? Moreover, if it does not exist, confirming an empty string will not lead to the desired result.

The fact is that Windows 7 provides new security tools, and therefore several conditions must be met to log in:

Use classic settings on all devices.

If all this is done, then you will not need to enter secret characters.

Resetting the administrator password( )

Sometimes situations happen when, under some circumstances, you simply forgot the password with which you can get to your desktop, and generally gain access to personal data. This often happens when a user constantly works on multiple devices. And if the passwords on them are not written down anywhere, then it is quite possible to confuse them.

There are several solutions. The first thing you can do is spend some time on selection. Alternatively, simply remove the system from your computer and install a new one. But in this case, the data that was on the system disk will be lost. And it’s not a fact that they can be restored, although methods exist.

But there is more safe way- a detour that I want to talk about. For this you will need installation disk or a USB flash drive with Windows. It is important to note that the operating system must be exactly the same. For example, if the Ultimate version is installed, then the same is true on a portable device.

So, if everything is found and prepared, you can proceed:

We insert the flash drive or disk into the computer and reboot to start from it. To do this, you need to set the appropriate settings in the BIOS.





Below we find " System Restore».



A window will appear in which we need " Command line».




increase

In it we write “ regedit" and confirm the actions.

The registry window appears. We need a branch " HKEY_LOCAL_MACHINE».





We go to the system drive (most often this is C:\). Next we go to the directory “ Windows\system32\config\" and select the file " system».

A small menu appears in which you need to enter the name of the new section. It can be anything. Let it be 3333.

On the right side, open the parameter “ CmdLine", where we enter "cmd.exe" and confirm.

After that, select “ Setup Type", where we enter " 2 ».

Now select the newly created section “ 3333 ».

Let's go to " File" And " Unload bush».



We take out the portable device, close all windows and reboot using system restore.

After the work has been done, a command line will appear while the OS is loading. Here we can change the password. To do this, enter in the line “ net user user password" We confirm the action. Example command: " net user admin 1111».

In this way we changed the password for the user " admin" to " 1111 " Now, in the window provided, we enter our treasured numbers and wait for the download.

Password reset via SAM file( )

There are many ways to bypass the login security system. Despite this, they all only change the information that is stored in the SAM file. It contains all the necessary data related to User-Password links.

It is worth noting that this file does not have a special extension. The fact is that it is a registry component. It can be found in the folder " Windows\system32\config", which is located on the system disk.

It is also important to note that this method is considered one of the most difficult. Nevertheless, I consider it necessary to tell it to you. For work we need special program. At the same time, each step must be performed with extreme caution, because this can radically change the entire process.

We will use Active password changer. In addition, we will need a clean flash drive.

So, to remove the password prompt, you need to:

If everything goes as it should, no problems should arise in the future, since only the components we need are changed in the system area.

The only downside is that some relatively older motherboards may not support starting with portable memory. In this case, you can use a plastic disk.

Well, as you can see, there are several different ways to remove or change your account password. At the same time, they are absolutely simple, you don’t even need to watch the video. By strictly following the instructions, everyone will be able to gain access to the necessary information.

I hope everyone here will find an option that will help them cope with the problem. Subscribe and tell your friends about me!

Removing the password when logging into Windows 7 is quite simple. This will require a minimum amount of time and knowledge. This kind of operation usually takes no more than a couple of minutes.

This can be done in various ways: through a special console, command line, or by resetting key data from SAM. Each method has both its advantages and disadvantages.

Why set a password

It often happens that some important and confidential data is stored on the PC, access to which should be limited. Microsoft Windows makes it possible to easily limit the circle of people who have access to files on the computer by installing a special key. Each person can have his own if there are several users.

An access code is also required to protect information on the PC to different owners from each other. For example, this is often necessary for parents so that curious children are not able to familiarize themselves with some information they are not entitled to.

Removing the password through the “Run” console

One of the most simple way disabling the entry of an access key on the OS - using the “Run” item. Accessing it is quite simple - just click on the “Start” button. Most often, the item in question is present on the right side of the window that opens.

Entering a command

To disable the function in question, you must enter a specific command. It will open a special applet that allows you to do this.

The process of entering the command is as follows:

• open the Start button menu;
• click on the “Run” item;
• In the field that opens, write “control userpassword2”.

After completing these operations, a window called “User Accounts” will open.

It contains two tabs:

• "Users";
• "Additionally".

You need to focus your attention on the first tab. Since this is where all account settings are made, including changing the login, access key and other attributes. In addition, if desired, you can easily add new accounts or remove old ones.

Disabling the password

To disable Password, just open the corresponding window (“accounts” -> “users”). In it, you need to uncheck the box called “Require username and...”. In this simple way you can disable the need to enter Password.

Confirming the user

You can also completely disable the Microsoft Windows login window.

To do this, you need to do the following:

• in the window called “Accounts”, double-click on the desired line (admin, user or something else);
• click “OK”.

A window will open containing three fields. Only the top one should be filled in; login is written there. The rest remain empty. After that, click on “OK” again. After performing these operations, when starting Microsoft Windows, there will be no need for Password. Which is quite convenient if only one person has physical access to the PC.

video: Password reset

Removing the password when starting Windows without programs

Also Password in the considered operating system can be unstuck without using the “Run” item, as well as various kinds third party applications. To do this, just use a special command line. In this way, you can avoid having to enter Password when you turn on the computer, as well as when it comes out of sleep mode.

Command line setup

In order to configure command line, you need to use the Windows distribution disk. This way setting up and resetting the access code is suitable if it is forgotten and it is not possible to start the OS otherwise.

First of all, you need to install it through the BIOS to boot from a CD or other device containing the distribution. After this, you should reboot and start the installation.

After this, the following actions are performed:

1. CmdLine – enter cmd.exe;
2. SetupType – replace parameter 0 with 2;

• select section 999 and click “Unload hive”;
• extract the distribution package and reboot the PC.

Resetting your password and login

After loading the operating system, the user will immediately see the command line window. To implement reset password you need to enter the following command: net user username

Photo: Net user username_new_password

If for some reason User has forgotten the account name, then you can simply write net user without parameters. This will allow you to display all available items and select the one you need.

If the new Password is not intended to be used, then it is sufficient to leave the field blank.

If you need to enter a new one, the command will look like this: disk name:\Windows\system32\net user user_name new-key.

It is also often necessary to create a new account without an access key.

To do this, you need to run the following commands in strict order:

These commands perform the following operations in strict order:

1. creating a new User;
2. adding it to the Administrator workgroup;
3. removal from the Users group.

The reset method in question is quite complicated, but quite feasible even for not very experienced PC owners.

Method for resetting key data from SAM file

There is a huge number of the most different ways resetting the login code. But all of them only change in various ways the information stored in a special file called SAM. It is used by the OS to store data related to both User and Password. This abbreviation name stands for Security Account Manager.

The file in question does not have an extension, since it simply does not require one. It is a direct part of the registry, located in the directory systemroot\system32\config. There is also a copy of the file in question on the emergency recovery disk if this function for some reason it was not disabled earlier.

Editing this file To change the login parameters of the operating system is the most difficult way. To work with SAM you need specialized software from third party developers. All operations with SAM must be performed with the utmost care and precision.

How does this work

The most popular application for changing data in the SAM file is active password changer. Before you start, you need to copy the application to some media or other hard drive FAT32.

After performing this operation you must:

1. run the password file from the folder "BootableDiskCreator";
2. in the window that opens, select "Add USB...";
3. activate the button "Start".

After completing all the above steps, a bootable USB flash drive will be created.

The process of changing data using the application in question is as follows:

This method of working with accounts and their attributes is as secure as possible. Since it allows you to avoid editing the registry and other manual operations. This can sometimes be difficult for not very experienced users who started working with their PC relatively recently. The likelihood of harming the operating system in this case is practically zero.

Another important advantage of this program is the ability to set a schedule for PC use by individual accounts.

The disadvantages include the fact that some outdated models motherboards do not support launching from a USB drive. In such a situation, you have to look for some alternative options: a floppy disk, a CD, or something else.

Quite often, especially with beginners, situations arise when the combination of characters required to enter the OS is forgotten or lost for other reasons. There are many ways out of such a difficult situation; reinstalling the system is not always required. Moreover, any computer owner who has minimal skills in interacting with this type of equipment can cope with resetting the OS access code.

Good time friends! Yesterday I was asked by email how to remove the password when logging into Windows 7 or 8? Well, as usual, I decided to write an article about this and tell you the same thing. In order to secure the use of Windows 7, the user can enable password entry at startup. If you no longer require this option, you can cancel the mandatory completion of the password field. So, first you need to select an account, which will be automatically loaded upon activation of the PC. Along with this, administrator rights are required. Let's take a closer look at how to do this.

How to remove the password when logging into Windows 7.8, etc.?

That’s it for all my friends, I hope you now know how to remove the password when logging into Windows 7 or 8. If something doesn’t work out for you, you can write to me in the comments and I will definitely help everyone. Don't forget to like and say thank you in the comments on VKontakte. I wish everyone only positive emotions for the next month)))

With UV. Evgeny Kryzhanovsky