How to disable text mode on Windows 7. Turn Windows Test Mode On or Off

In Windows 10, more and more attention is paid to security measures to protect the user from various threats, from crashing installed programs. One of these innovations was the function Secure Boot UEFI systems, which prohibits the installation of unsigned drivers in the operating system in such a way that only those that were previously approved by the company could be installed. Fortunately, for users who need to install a specific, unsigned driver for special reasons, there is a function Test Windows mode 10 .

Test mode Windows 10- this is a special operating mode with which users can install unsigned drivers and run software without a digital signature from Microsoft. This mode is good because you can run this or that driver and see the consequences on the system without any risks. When you turn on Test Mode, you will see a watermark on the screen, but what if it turns on by itself? And how to disable test mode in Windows 10.

How to enable or disable Test Mode in Windows 10

Important:

1. If it worked automatically and appeared on the screen Test Mode watermark and you just need to disable test mode, go straight to step 4.

Step 1. Run command prompt as administrator:

• Click Search.
• Type cmd.
• Right-click on Command Prompt and Run as Administrator.

Step 2. To enable test mode, enter the following commands:

• Bcdedit.exe -set TESTSIGNING ON

Step 3. To disable test mode in Windows 10, enter:

Step 4. If step 3 doesn't help, try these commands to disable it:

1. Bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS
2. Bcdedit.exe -set TESTSIGNING OFF

Restart your computer or laptop.

Some operating room users Windows systems 10 discover a mysterious message “Test Mode” on their desktop. This inscription is located in the lower right corner of the screen and indicates that the system is operating in test mode.

Test mode is a mode in which the Windows 10 operating system allows users to install and use drivers that are not signed by Microsoft. This mode is usually used by software developers. If you suddenly have this mode turned on, you can disable it or simply remove the “Test mode” inscription from the desktop.

Disabling Test Mode in Windows 10

In order to disable test mode in Windows 10 you will need. You can open it in different ways, the most reliable way, which will work in any case, is to search in the Start menu. To do this, open the “Start” menu, enter the “cmd” command in the search, then right-click on the found program and select “Run as administrator.”

After this, “Command Prompt” should appear in front of you. The window title should read “Administrator,” which indicates that Command Prompt is running with administrator rights.

Now you can start disabling Windows 10 test mode. To do this, you just need to run the command “ bcdedit.exe -set TESTSIGNING OFF" and restart your computer.

After executing this command and rebooting the computer, the “Test Mode” sign should disappear from the desktop.

How to remove the “Test mode” sign from the desktop

If you do not need to disable test mode, but simply remove the “Test mode” inscription from the desktop, then this can be done using free program Universal Watermark Disabler. This program is designed to remove various watermarks in the Windows 8, Windows 8.1 and Windows 10 operating systems. The developer claims that the program works in all Windows builds starting with Windows 8 build 7850.

In order to hide the “Test mode” message using the Universal Watermark Disabler program, install and run it on your computer. After launching this program, you will see a small window with an “Install” button.

Click on this button and confirm the use of the program by clicking on the “OK” button. After this, your computer will restart and the “Test Mode” text will disappear from the desktop.

Windows 10 Test Mode has been added to your OS specifically so that you can troubleshoot problems or interact with certain other devices.

Some users connect devices running other OSes to their PC. For example, smartphones with Android. For such equipment it may be necessary to install unsigned or specific drivers. In these situations, it is recommended to use Windows 10 test mode, which is worth talking about in more detail.

Sometimes, under such conditions, some new assemblies of this operating system. For example, build 10586. But in this case we were talking about a version that is not yet considered official and in which some functions were limited by the developers themselves.

In order for the OS to enter this mode and function normally in it, the secure boot option must first be disabled. Today many manufacturers install different ways to go to such settings in motherboards. There are differences in the design of all these settings, but not significant. In general, user actions can be as follows:

• Launching BIOS or UEFI;
• “OS type” – “Other OS”.

After this, you need to save all the settings and reboot the device. If there is no safe boot option, we can talk about disabling it at the hardware level. Therefore, you do not need to perform all the above steps. Of course, so that the system offers you secure boot there must be several unsuccessful attempts to start the OS, which is not very correct to do on purpose.

Now it will be possible to run test mode in Windows 10, where certain restrictions on the installation of specific drivers are removed. To do this, you need to have administrator rights, with which the command line itself starts. Enter here:

• "bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS";
• "bcdedit.exe -setTESTSIGNING ON."

For each command, you will have to wait for it to complete execution, and only then enter the second one. When the latter is completed, a corresponding notification will appear. Then you will need to reboot. A corresponding notification should appear in the lower right corner.

How to disable test mode

When you want to disable this mode, you will need to enter the same commands. But the second of them will be written differently:

• "bcdedit.exe -setTESTSIGNING OFF"

You must understand that all the described actions seriously reduce the security level of the OS, so be careful. Please note that even if you have any other powerful antivirus, even an incoming one, your PC is still under threat and while you are in this state, it is vulnerable to literally everything. Therefore, complete it as soon as the need disappears.

Be sure to bookmark our page as often people figure out how to enable Test Mode on Windows 10 and then have trouble disabling it. But it is important to know both, and above we have provided you with instructions for both situations. And if you manage to start, then you can disable it without problems, the main thing is to follow our instructions.

Many PC users are faced with such a problem as test mode in Windows 10. Not everyone can disable this annoying message hanging on the screen. But this guide will help you in this difficult task. Here you will learn not only the main way to fix the problem, but also an additional one, more suitable for users who do not want to take risks.

Causes of the problem

Before you disable test mode in Windows 10 Pro (or any other edition of Ten), you need to understand the reasons for this malfunction. Most often this happens if:

• You have manually disabled the driver digital signature control system.
• When installing any program, you agreed to activate the test mode.
• While the operating system was running, or during its next update, some kind of failure occurred.

In addition, the error often occurs when using pirated Windows. In unlicensed versions, there may be several reasons for enabling test mode, ranging from driver signature checking, which is disabled by default, to modified system files. In general, you never know what the pirates did there.

Consequences

Even if you don’t know how to disable test mode in Windows 10, there will be no serious consequences from doing so. The computer will continue to function normally. The only way the “test” operating system will differ from the regular one is the corresponding inscription at the bottom of the desktop.

But if you still decide to take such a step as disabling test mode in Windows 10, then you may encounter some troubles. The fact is that some programs and devices use unsigned drivers to operate. They, in turn, will cease to function normally after test mode is deactivated, which may cause problems.

Basic method

You can use command line, disable test mode in Windows 10. This method is recommended by Microsoft employees, so it is considered the main one. To use it, do the following:

• Login to the command line.
• Type "bcdedit.exe" then press the spacebar and add "-set TESTSIGNING OFF".
• Confirm the changes and wait until the operation is completed.

Restart your PC. If you did everything correctly, the system will stop working in test mode and, accordingly, the inscription will disappear from the desktop.

Using a special program

Since disabling Test Mode in Windows 10 can sometimes lead to negative consequences, you can play it safe and use alternative method. To do this, the UWD utility will be used, which is precisely used to remove all kinds of inscriptions from the desktop. To use the application:

• Install the program and run it.
• Click the “Install” button, confirm the changes you are making and wait until the operation is completed.
• The program will ask you to restart your PC. Do this and wait for your computer to turn on.

If you did everything correctly, the annoying inscription will disappear from your desktop. Please note that UWD does not disable test mode, but only hides the message about its use.

Live forever, learn forever - the well-known saying recently forced me to remember again. It would seem that we know all these Windows inside and out, so it’s quite difficult to surprise us with our tricks, as for versions 7 and earlier. But the recent moment was a little puzzling. The reason was the operation of flashing the smartphone's firmware hundreds of times through a computer on which the Windows 7 operating system was installed.

As usual, after connecting the smartphone, the system began to load the drivers and software necessary for operation, where, almost without looking, I pressed the next button. Having completed the installation, the system asked to reboot, and after loading, an interesting inscription “Windows 7 test mode, build 7601” appeared on the desktop in the corner. Since the inscription appeared in a place where the system usually swears at Windows activation, then the first suspicion was that the activation had failed. However, remembering that this particular Windows is licensed and activated according to all the rules, I simply Googled the strange inscription.

Everything turned out to be simple, without looking at the Next and Yes buttons, I noticed that when installing drivers for the smartphone, I was asked if I wanted to go into testing mode, as a result, my frivolous consent led to the Windows 7 operating system loading in testing mode, as evidenced by the corresponding inscription - “Test mode of Windows 7, build 7601.”

Any software product certainly must undergo appropriate testing, which allows you to identify errors, ensure full functionality of the program, and optimize it. The only question is how to carry out such testing. Paul Gerrard, who is the director of Gerrard Consulting Limited and runs the UK Test Management Forum, gives an interview where he talks about the advantages of manual testing over automatic testing.

According to information from the Microsoft website, test mode allows you to work with programs that do not have an authentication certificate. That is, nothing bad happened; the problem that remained was how to return to normal mode, since a simple reboot did not allow exiting the test mode. But even here the official Microsoft website helped; it was enough to follow three simple steps.

1) Launch the command window using the key combination Win + R

2) In the command window, enter the following command: bcdedit /set TESTSIGNING OFF (for Windows 8 the command will be bcdedit -set TESTSIGNING OFF

3) Click OK and reboot the system

This way you can disable the testing mode in Windows, and if you want to enable it again yourself, to do this we perform the same three steps, only instead of OFF we write ON.