How to download and install mods correctly. How to install mods for tanks - step by step instructions

Most “tank drivers” sooner or later wonder whether someone lacks the capabilities of the “vanilla” version of the game, someone wants to simplify their life, and someone is trying to bring tank battles closer to reality. Whatever the player’s motives, it won’t hurt to know in World of Tanks. Therefore, today we will fully dive into this issue.

Modification folder

So, the first thing you must always remember is that all modifications to the World of Tanks game are installed strictly in a folder called res_mods. It can be found directly in the root directory of the installed client. In this folder you can find others whose names correspond to the version of the game. That is, the mod installation path will look like this: World_of_Tanks\res_mods\х.х.х. Where x.x.x stands for the client version number.

So, how to install mods on World of Tanks? Just unzip the contents of the archive into the above folder? In fact, it's better not to do this. Even if the instructions for the modification indicate that you need to copy the entire x.x.x folder and replace it with the one that is on your computer, you do not need to do this. You can copy and replace the files themselves, but not the directories, since sometimes you can accidentally delete necessary files another fashion.

It's computer magic

Now let's look at the process in more detail. After installing the game, in its root directory there is a res_mods folder, in which another folder is nested - 0.9.1, it is completely empty. Let's go into it. Here we create a gui directory with a flash folder embedded in it.

We unpack the contents of the modification archive to a place convenient for you. We look for files with .swf resolution and move them to the newly created flash folder. We move the remaining files to the directories specified in the instructions for the mod. Often the archive already contains the necessary folders, and instructions are not needed here. In this case, you just need to copy everything to the game version directory.

How to install the skin mod?

To do this, unpack the files directly into the game directory. Let's look at an example of camouflage for the notorious:

• go to the folder with mods, and then to the directory of the current version of the game;
• create the vehicles folder, necessary for the combat vehicle files;
• then the german directory, which will contain German tanks;
• inside we create a folder called G42_Maus, it will contain the camouflage “skin”; every time you want to change appearance"Mice", replace files in this directory;
• from the archive with the mod we move all files with the extension .dds to the directory;
• Now you can enjoy a new type of Wehrmacht combat vehicle.

As you probably already understood, installing World of Tanks mods is quite simple. For this purpose, a german folder is created, in which the catalog of a specific model is placed. For American cars, the folder will be called american, Chinese - china, French - french, Briand - british, Russian - russian.

How to install old skins on new versions of the game

“Tank drivers” know that after game version 0.9.0, the old illuminated “skins” and even simple camouflages stopped functioning properly. The reason for the game's refusal to accept old files was the transition to HD models. During this transition, "skins" began to be called differently. For example, previously the camouflage for a tank was called T-44.dds, but now the letters AM have been added to all files. And in order for the camouflage to work, it should be renamed to T-44_AM.dds. After this everything will work properly. Unfortunately, this method will not work for all models, so some will have to be abandoned.

Installing sights

After camouflages for World of Tanks, sight mods take an honorable second place. They allow you to significantly diversify the gameplay, adding greater practicality or realism to the interface.

To install such modifications, you need to go to the res_mods mod directory, in which a scaleform subfolder is created (or flash, the specific path depends on the features of the modification itself). Now you just need to copy all the flash files from the archive. After launching the game, new sights will become available in it.

Last parting words

Don't forget about compatibility issues. So, it often happens that after the release of the next patch, some mods begin to “fall off” or negatively affect the performance of the game. Sometimes it is enough to wait a couple of days until the creators of the modification update the version of their brainchild, sometimes it is enough to simply change something in the modification (move the files to another directory, rename them).

The same applies to downloading modifications, always check the versions of your client and the downloaded mod. This will protect you from problems during the game (jumps in movement, falling into textures, etc.).

For those who don’t want to bother too much with creating folders and moving files correctly, we can recommend various managers created specifically for unpacking modifications for the game World of Tanks. They significantly speed up the whole process and allow you to install the mod in almost one click.

The World of Tanks game is built in such a way that any player can modify the graphical part of the client to his taste. A huge number of mods allow you to change screensavers and hangars, camouflages and decals, and also improve the functionality of the game. For example, sights from modders have many features compared to a standard sight. How to install a mod on World of Tanks?

The first mods for the game were separate archives that needed to be unpacked into specific client folders. Over time, mod assemblies have appeared that contain the most useful mods. Players do not need to separately download a bunch of modifications and test them for compatibility. Just download the assembly file and install it on top of the client. One of the popular assemblies is the Jove modpack. The assembly includes several different sights, a smart minimap, an XVM mod, skins, etc.

More details about this assembly can be found in the following video:

However, not all users need such assemblies. For some, a modified sight is enough, while for others, a comprehensive XVM mod is enough. All mods in WoT are installed in the res_mods/0.9.X folder, where X is the version of the current patch. Each mod, be it a sight or skins, is unpacked into a specific folder. Let's figure out how to install a mod on WoT.

Mod installation process

Installing any mod takes place in three stages:

1. Download the archive with the mod from the game’s fan sites.
2. We create additional folders for the mod in res_mods/0.9.X.
3. Unpack the archive with the mod into the created folders.

Mod folders

Hangars– \res_mods\0.9.Х\content\Interface\shells\Hangar or Hangar_Premium

OverTargetMarkers– \res_mods\0.9.Х\gui\flash

Zoom-Mod– \res_mods\0.9.Х\gui\flash

Damage panels and sights– \res_mods\0.9.Х\gui\scaleform

Skins with penetration zones– \res_mods\0.9.Х\vehicles

Tank icons– \res_mods\0.9.Х\gui\maps\icons\venicle\contour

Loading screen– \res_mods\0.9.Х\gui\maps\login\

Crew icons– \res_mods\0.9.Х\gui\maps\icons\tankmen\icons

But keep in mind that due to the large number of installed mods, the FPS in the game may drop. For example, the “deer gauge” or strength markers in the “ears” are the most resource-demanding mods in the game. They are not recommended to be installed on weak computers, as playing with low FPS is uncomfortable.

If this is your first time installing mods for the game World of Tanks, then pay attention to mod assemblies that are much easier to install and configure. Builds are good because you don’t need to test mods for compatibility. Because often after installing modifications, problems arise with the game client.

Game modifications help World of Tanks players feel more comfortable in battle, recognize their achievements directly in battle, and also allow them to find out information about the enemy, his skill, and much more.

Where to install mods for World of Tanks

In order to use various game modifications that will definitely simplify some gameplay features and make the game more convenient, you must first install them in your game client.

Game modifications can be installed using special collections - the so-called “modpacks”, which contain large number all kinds of modifications (from sights to player statistics). You can also install individual mods yourself, without the help of these assemblies.

Installing individual mods mostly causes difficulties for players.

To install any game modification, you need to go to the folder with the game client, most often it is located at the following location D: /World of Tanks/. In it you need to find the /res_mods folder - it was created automatically so that players could install the necessary modifications themselves. Then you need to create a folder with the name of the current game patch (current version), for example, it will be /0. 9.13.

The final installation path will look like this: D /World of Tanks/res_mods/0. 9. 13.

The installation of most mods will be successful if you install this way. However, some mods will require the creation of other folders, for example, some sights will require the creation additional folders in the /0 folder. 9. 13.

To install the sight, you must create a /gui folder, then create a /scaleform folder in it. The final path should look like this:

D /World of Tanks/res_mods/0. 9.13.0/gui/scaleform

How to install the World of Tanks sound mod

A sound mod is a modification with which a player can change existing sounds in the game. For example, completely change the voice acting of the crew, individual phrases when hit, and so on. Also, sound mods can add new elements of voice acting, such as a critical bell (critical damage) of a module or an injury to a crew member.

Installation of such modifications is quite simple. To install sound mods, you must first download them from the website, the folder will often be called /audio. Then you need to go to the folder with the game client, and there we will also notice the same folder.

Then you should copy all the files from the downloaded /audio folder and paste them into the game /audio folder. It is necessary to copy and replace the current files, otherwise the mods will not work.

Before installing sound modifications, be sure to close the game client. In addition, you should not install a large number of sound mods, because they can lead to conflicts in the game, in some cases the game may not even start or may crash upon startup. This applies not only to sound mods, but to everything else.

What mods to install in World of Tanks

The most necessary game modifications for players are:

Sights (the basic sight does not provide the required amount of information and can be replaced, for example, with a sight from Jove, which shows reload time, zoom, the amount of tank durability, the presence of shells in the drum, and so on);

Graphic (this can also include “tank penetration skins” - a useful mod that shows vulnerabilities in the armor of tanks, also these are mods like “white corpses” - helps to target enemies behind corpses, as well as “bright railway platforms”, “white downed tracks", "increasing visibility range");

Sound mods (new voice-over, light-up lamp voice-over, crit bell and many others);

Hangar modifications (a mod that completely transforms the appearance of the player’s hangar);

Player statistics mod, or the so-called “deer meter” (allows you to find out information about the player - his winning percentage, efficiency, as well as the number of fights);

These are the main mods, but there are many others that will improve your level of playing tanks.

Install the mod pack on World of Tanks

Installing a mod pack is much easier than installing individual mods yourself. The developers of the mod pack have already put all the mods into one “heap”, which can be installed like a regular program/game using the usual installer. All the player needs is to select the necessary ones from all the available mods.

There are a large number of all kinds of mod packs from different developers on the Internet. The most popular is the “Mod Pack from Jove”, which contains a huge number of mods from many developers. In addition to “mods from Jove”, you can also install mods from: Desertod, Maracasi or Amway921. There are a large number of them, so everyone will find a selection to suit their taste and color.

Game modifications help World of Tanks players feel more comfortable in battle, recognize their achievements directly in battle, and also allow them to find out information about the enemy, his skill, and much more.

Where to install mods for World of Tanks

In order to use various game modifications that will definitely simplify some gameplay features and make the game more convenient, you must first install them in your game client.

Game modifications can be installed using special collections - the so-called “modpacks”, which contain a large number of various modifications (from sights to player statistics). You can also install individual mods yourself, without the help of these assemblies.

Installing individual mods mostly causes difficulties for players.

To install any game modification, you need to go to the folder with the game client, most often it is located at the following location D: /World of Tanks/. In it you need to find the /res_mods folder - it was created automatically so that players could install the necessary modifications themselves. Then you need to create a folder with the name of the current game patch (current version), for example, it will be /0. 9.13.

The final installation path will look like this: D /World of Tanks/res_mods/0. 9. 13.

The installation of most mods will be successful if you install this way. However, some mods will require the creation of other folders, for example, some sights will require the creation of additional folders in the /0 folder. 9. 13.

To install the sight, you must create a /gui folder, then create a /scaleform folder in it. The final path should look like this:

D /World of Tanks/res_mods/0. 9.13.0/gui/scaleform

How to install the World of Tanks sound mod

A sound mod is a modification with which a player can change existing sounds in the game. For example, completely change the voice acting of the crew, individual phrases when hit, and so on. Also, sound mods can add new elements of voice acting, such as a critical bell (critical damage) of a module or an injury to a crew member.

Installation of such modifications is quite simple. To install sound mods, you must first download them from the website, the folder will often be called /audio. Then you need to go to the folder with the game client, and there we will also notice the same folder.

Then you should copy all the files from the downloaded /audio folder and paste them into the game /audio folder. It is necessary to copy and replace the current files, otherwise the mods will not work.

Before installing sound modifications, be sure to close the game client. In addition, you should not install a large number of sound mods, because they can lead to conflicts in the game, in some cases the game may not even start or may crash upon startup. This applies not only to sound mods, but to everything else.

What mods to install in World of Tanks

The most necessary game modifications for players are:

Sights (the basic sight does not provide the required amount of information and can be replaced, for example, with a sight from Jove, which shows reload time, zoom, the amount of tank durability, the presence of shells in the drum, and so on);

Graphic (this can also include “tank penetration skins” - a useful mod that shows vulnerabilities in the armor of tanks, also these are mods like “white corpses” - helps to target enemies behind corpses, as well as “bright railway platforms”, “white downed tracks", "increasing visibility range");

Sound mods (new voice-over, light-up lamp voice-over, crit bell and many others);

Hangar modifications (a mod that completely transforms the appearance of the player’s hangar);

Player statistics mod, or the so-called “deer meter” (allows you to find out information about the player - his winning percentage, efficiency, as well as the number of fights);

These are the main mods, but there are many others that will improve your level of playing tanks.

Install the mod pack on World of Tanks

Installing a mod pack is much easier than installing individual mods yourself. The developers of the mod pack have already put all the mods into one “heap”, which can be installed like a regular program/game using the usual installer. All the player needs is to select the necessary ones from all the available mods.

There are a large number of all kinds of mod packs from different developers on the Internet. The most popular is the “Mod Pack from Jove”, which contains a huge number of mods from many developers. In addition to “mods from Jove”, you can also install mods from: Desertod, Maracasi or Amway921. There are a large number of them, so everyone will find a selection to suit their taste and color.

World Of Tanks is a popular multiplayer game in the historical setting of World War II. The concept of this project is based on tank battles between players, using authentic equipment that was in service with European and American countries in the mid-20th century.

WoT is distinguished by the variety of game content, but there is hardly a person who would not like to get at their disposal even more equipment from the Second World War. If you actively take part in tank battles, you should be interested in learning how to install mods on World of Tanks.

Installation

Installing a modification in WoT is quite simple: if you have installed mods on SLRR or any other game, then you already have a rough idea of ​​the sequence of actions.

Each archive with a modification must contain a file that indicates the installation features of the add-on. Be sure to read it so as not to make a mistake when installing the mod.

All modifications must be added to the WoT root directory, which opens along the path “World_of_Tanks → res_mods → game version.”
However, for some types of modifications, additional directories must be created.

Adding "skin"

Follow the path “World_of_Tanks → res_mods → game version” and create the “vehicles” folder. Inside this directory you need to create another folder that will have the name of the country of the tank: for example, if the tank is French, then the directory will be called “french”; German – “german”, etc.

Inside the directory, "german" is created with a mod, which should be named the same as the modification itself. Then all files with the *.dds extension are copied to the final directory. Mods for Mafia 2 are installed in a similar way, so it won’t be difficult to figure it out.

Examples of adding mods for version 9.6

If the specified directories do not exist, you must create them yourself:

• Hangars - C:\Games→World_of_Tanks→res_mods→0.9.6→content→Interface→shells→Hangar
• Caterpillars - C:\ Games→World_of_Tanks→res_mods→0.9.6→vehicles→Nation→Tracks
• Mini-map - C:\Games→World_of_Tanks→res_mods→0.9.6→gui→flash
• Icons - C:\Games→World_of_Tanks→res_mods→0.9.6→gui→maps→icons→vehicle

Do not copy files from the downloaded modification to the root directory of the game with replacement. This may result in the loss of important data.

Possible problems

After the release of version 0.9.0, the old “skins” stopped working. This is due to the transition to the use of HD models. In order for the skins to start functioning again, you need to add the value “AM” to the file name. For example, there was a file “T-44.dds”, but it will become “T-44_AM.dds”. However, not all models can be corrected this way, so it’s easier to immediately download new “skins”.
For using some mods, players are banned from the server, so be extremely careful and do not break the rules. Cheaters are not loved anywhere, and WoT in this sense is quite cruel to users who do not respect the rules.

Remember about compatibility: after the release of the next patch, old mods sometimes stop functioning and cause bugs in the game. Always check the version of the client and the downloaded modification so as not to create problems in the game (jumps, texture failures, etc.).

If you want to return the game to its original appearance, remove the mods from Jove and other add-ons you previously installed.