Ways to unlock the TV, its buttons and channels. Rostelecom has encrypted IPTV channels! How to disable encryption?! New TV features
The MTS TV service appeared relatively recently and has already gained great popularity among users. However, questions are increasingly appearing online about how to unlock the MTS TV remote control. User complaints are not unfounded, but are most often associated with problems with improper operation of the equipment. At the same time, it is possible to unlock it yourself without any skills in working with technology.
Many people believe that the remote control is blocked if it stops responding to commands. However, in such a situation we are not always talking about direct blocking. Most often, the reason for the lack of response of the remote control to the influence is explained by the loss of battery charge or the transition to the TV control mode. Accordingly, it is recommended that you first try replacing the batteries. If the remote control still does not work, you will need to return it to normal operation.
The company provides several types of set-top boxes and remote controls that correspond to them. Therefore, the solution to the problem of how to unlock the MTS remote control will be somewhat different:
- For ZTE-B700V7. Switch remote control to the correct mode you need to use the button labeled “MTS”. Below it is a light indicator indicating whether the device is ready or not ready for operation.
- Huawei DN 300. To unlock, you will need to press the “TV” or “MTS TV” button and pay attention to the indicator. Its single blink indicates a transition to the control mode of the set-top box, twice – the TV.
- SML-282/292/482. Go to desired mode carried out by the STB button.
- Motorola VIP 1003. Enabling the control mode for the set-top box - MTS, TV - TV.
These methods are only relevant if the TV and the set-top box itself are working properly.
If the switching instructions do not help, it is necessary to carry out technical diagnostics of the equipment. In addition, it is recommended to check the condition of the connection cables, since the lack of response to pressing buttons does not always indicate direct blocking of the remote control remote control.
Conclusion
Some MTS subscribers complain about the difficulty of operating the TV set-top box due to the systematic blocking of the remote control device. However, the phenomenon does not always indicate the presence of malfunctions, therefore, if a lack of response is detected, it is recommended to check the remote control for the type of system connection. If this does not help, you should also analyze the quality of the batteries, cables, and then the equipment.
Sometimes it happens that children or adult users inadvertently turn on the lock on the TV, or parents block the TV from children, and then find it difficult to remove it. There are often situations when the owner simply forgot the password and now he himself cannot view the channels. Signs that your TV is blocked are:
Display blue screen, which shows a key;
A field appears on the screen where the device asks you to enter a PIN code (password);
Only one channel is available for viewing.
Answering the question of how to unblock a TV, it is necessary to highlight three main options for solving this problem, namely:
Disable the lock using the remote control by typing a special combination of buttons;
Set up channels again (sometimes they can be lost by accident or due to a software glitch);
Flash TV memory.
Usually the blocking can be removed on your own, but if flashing is required, it is better to seek the help of a specialist. In general, for independent work the owner needs to have only two things - instructions for his TV and a working remote control for it. If the instructions are lost, you can easily view or download them on the Internet. Regarding the TV model, this information is indicated on the back panel.
What to do in a standard situation
Having the instructions for the TV in hand, you should carefully read those sections that relate to blocking. Your task is to find a special code, a combination of numbers, after typing which the remote control is locked and unlocked. The instructions also contain actions and their sequence specifically for your model. If there are no instructions, and there is also no access to the network at the moment, you will have to strain your memory and remember what exactly led to the device being blocked.
From the remote control you need to press the P and + buttons while holding them down at the same time. Next, you need to enter a three or four digit password in the field. The type of such combinations usually consists of the same values, for example, 1111, 4444, 333, coinciding with the number of the most frequently used channel. Quite often standard codes in the form 1234 and others are used. After entering, press + again.
If after these steps you cannot unlock the Akai TV, Samsung, LG, Thomson models and others, the password is not reliably known, you can try other combinations, they are set by the factory settings and are not too complicated.
There are TVs that support locking with only one button. Accordingly, to block or unblock channels, you need to press and hold this button for five to ten seconds.
Possible problems and what to do about them
Before you unlock your TV, you should first figure out the cause of the problem. Based on practice, the most common cases are presented below:
|
What could it be |
How to fix |
|---|---|
|
The user set a password and forgot it, does not know it (a blue screen with a key may indicate this) |
Press and hold the DISP button on the remote control for ten seconds. If this does not help, use the standard remote control in accordance with the instructions for the TV |
|
The child lock is set, but the remote control is lost |
It is impossible to solve the problem without a remote control, you need to find one or buy a new one |
|
The TV does not respond to pressing buttons on the remote control |
The remote control may be faulty or the batteries may be low. You should purchase new batteries or a remote control. You can also use your smartphone as a remote control (if your TV supports this function). You can also check the functionality of the old one using your phone by holding down any button and taking a photo of the remote control pointed at the phone - if there is a micro-flash in the photo, the remote control is working. In this case, the TV port has probably failed and you need to call a technician. |
|
Only one channel is available for viewing |
The channel settings are probably out of order. There is no need for a wizard, as you can configure them yourself |
Sometimes it happens that after the blocking is removed, TV channels do not tune in or then they go wrong again, the TV menu freezes, and other strange glitches are discovered. This may indicate that the tuner is faulty and the TV needs to be re-flashed (updated). For inexperienced users It would be better to contact a specialist.
In the process of using technology, you often have to find the answer to the question of how to unlock the TV remote control. This often occurs after being exposed to pets or small children. The fault may also be an accident when certain buttons are pressed arbitrarily. In any case, the problem requires a solution, and below we will offer options for solving the situation when the remote control is blocked.
If the TV does not respond to remote control commands, then the first thing to do is check its batteries. Maybe they are simply discharged or faulty. It's very easy to do this:
- open the battery compartment;
- remove the installed batteries;
- insert similar new batteries.
- check the functionality of the remote control.
Note! It is worth inspecting the battery compartment to ensure that the contact pads are working properly. Perhaps they were bent, or traces of oxides formed on them. All this can also lead to the remote control not working.
If nothing has changed after these events, it’s time to think about how to unlock the TV remote control. There are a huge number of ways to unlock the remote control. But not each of them will be effective for a particular model. Most best option– view the instructions for the TV. Usually answers to all common questions are written there. But the book is not always saved after purchasing equipment. For this reason, you have to look for the answer yourself.
The instructions usually state special code. It will be enough to press this combination on the remote control buttons, and the problem will be solved. If no papers have been preserved, the first thing to think about is how the blocking occurred. By trying to do the opposite, you can make the remote control effective in relation to the TV.
Alternative methods
There are a large number of options for unlocking the remote control that Internet users offer:
- Press the “P” and “+” buttons simultaneously. After this, a combination of identical numbers is dialed, for example 2222 or 5555. Common and standard codes include 1234 or 1111. After dialing the combination, press “+” again. Perhaps it will be a completely different combination of numbers. There are numerous options to try.
- After the initial numbers from the first method are pressed, the LED should remain lit without interruption. In this case, instead of a combination, you can try simultaneously pressing: “Menu” and “+Channel”, “Menu” and “+Volume”.
- Sometimes it is enough to hold down one button for about 5-10 seconds. But this method is suitable for a few TV models.
Remember the combinations of numbers that you press! After all, rash actions can only aggravate the situation.
Some remote control models can be unlocked by simultaneously pressing the “Exit” button and the numbers 9 and 1. The option of removing the batteries is also suitable, and while inserting them, the power button must be held. It is these methods that help return the remote control to full operation.
What is hotel mode
In some models of television receivers there is an option called “HOTEL MODE”, which translates as “hotel mode”. If it is turned on, the equipment will not respond to many remote control commands, for example, increasing the volume or searching for new TV channels. This is done in order to limit the possible actions of hotel guests. Thanks to its use, loud sound from the TV will not disturb other residents. However, in a personal apartment or house, turning on the “hotel” mode will only interfere.
To disable the option, you can use the following recommendation. In Stand-By mode, press the Display/Menu/Power buttons on the remote control in turn. Another version of the sequence looks like this: Display/Menu/Mute/Power On, and in the menu that appears, select reset and press the MENU button. After that the device needs to be rebooted(turn off and on).
How to remove parental controls
Another option that is often implemented on modern TVs is parental controls. It is designed to limit the actions of children: for example, watching prohibited TV channels, changing system settings. To perform such actions, the TV will ask set PIN code.
But sometimes this control plays a cruel joke on the parents themselves: by turning it on and forgetting the code, you yourself can face inconvenient restrictions. Resetting the TV settings, namely the password, will help remove them. Here is the algorithm for LG smart TVs:
- go to Menu/Settings;
- go to the Security/PIN code reset tab;
- enter any combination of numbers without pressing OK;
- press the channel switching buttons: up twice, then down and up again;
- enter code 0313 and click OK.
The result of these measures should be to reset the PIN code to the factory one, that is, four zeros.
