Set up an LG split system. Air conditioner user manual remote control (split system)

Everyone is accustomed to a comfortable life, and one of the parts of comfort is the air conditioner installed in a house or apartment. Air conditioning saves us all in hot weather; it prevents us from exhausting ourselves in stuffy conditions. Also, few people know the fact that the air conditioner can heat. According to statistics, about 80 percent of air conditioner owners do not use it in the winter, and many do not know how to turn on the heating function on the air conditioner.

When studying the technical capabilities and instructions of many air conditioners, the minimum and maximum air temperature at which it can operate is written, but many do not understand what this means. This is quite simple, if the air temperature is below that specified in the instructions, then the oil that is in the air conditioner freezes, and this leads to breakdown. And if it is higher than the specified temperature, then the air conditioner simply overheats.

Current types of air conditioners have 5 operating modes, namely:

1. The most common mode that everyone knows about is the cooling mode. It is this mode that makes it possible to feel cozy and comfortable on hot summer days. When operating in this mode, the air conditioner cools the air in the room and removes excess warm air to the street.
2. Drying mode. By the way, the presence of such a mode in the air conditioner will be useful if the room has high humidity. When using this mode, the humidity in the room is significantly reduced, but the temperature remains the same.
3. Ventilation mode. This mode does not cool or heat the air or dry it, it simply circulates the air around the room. And if a filter is installed in the air conditioner, then in this mode the air is cleaned. And with this mode of operation, you can not open windows and vents to ventilate the room, and maintain the temperature.
4. Auto mode. When you select this mode, the air conditioner automatically selects the optimal room temperature. That is, it checks all the settings you have specified and compares the temperature characteristics and determines what needs to be done. If the temperature in the room is lower than the specified one, then it warms the air, and if it is higher, it cools it.
5. The heating mode is absolutely opposite to the cooling mode and the air conditioner obviously warms up the room. But few people know how to turn on the air conditioner to warm up.

Think about it, did you know about all the benefits of your technology?

The following brands are very popular at the moment:

• Sensei;
• Samsung;
• Lji;
• Hayer;
• Dantex (dantex);
• Chigo;
• Arvin;
• Saturn;
• Baloo;
• Lessar;
• Kraft;
• Delfa;
• Idea;
• Kitano.

After you are about to install the Conder, pay attention to its designations, because very often setting up is difficult due to the fact that English is used. Therefore, before switching the Conder and going into operation, a translation will be required. And if everyone can translate the split system, then, for example, not everyone can cope with such designations as haier (hot) or syntek. It is for this reason that many do not know how to make heat and cold and how the entire media system works and heats.

Warm-cold air conditioners: how to turn them on

Nowadays, air conditioners not only cope with cooling the room, but can also warm it up. Although, as was written above, air conditioners can operate at certain temperatures, progress in improving qualities and capabilities shows the opposite.

Many well-known companies nowadays produce air conditioners that can operate even at temperatures of minus 25 degrees, and this allows you to optimally adjust the temperature.

To achieve comfort, specialists made a heat pump. And if simple heaters have a built-in heating relay, then in an air conditioner everything is completely different.

The air conditioner has a heat pump that operates in a special mode; it pumps heat from outside to inside. And even when the air temperature reaches minus 20 in winter, it still pumps out heat from there. This is done in this way: it selects condensate from the air and, with the help of freon, which has high pressure in the system, begins to condense in the thermoblock of the air conditioner.

Setting the temperature mode: how to set the air conditioner for warm air

We take the remote control for the air conditioner, and the first thing that catches your eye is the buttons with + and – signs, these buttons make it possible to adjust the temperature. There are also other buttons on the remote control.

Let's consider standard set buttons on the remote control:

• A button that will allow you to warm the room up to 30 degrees with the inscription heat, and this function is used at low temperatures;
• The cooling mode is activated by the cool button;
• Drv includes the drying function;
• To change the speed at which the room is heated or cooled, press the fan button;
• To maintain the set temperature, there is an auto button on the remote control;
• The Sleep button is the choice of the most interesting function, selecting such a function and setting it up, since you need the air conditioner to constantly maintain the temperature you have chosen;
• The Swing button makes it possible to fix the air conditioner flaps in one position or vice versa so that it changes the airflow angle;
• The air conditioner also has an auto restart function, which makes it possible to resume operation in the mode that was selected after a power outage.

But the remote control is not a chapel without a remote control, you can also control the air conditioner, but, however, it is not so comfortable. Almost all air conditioners have a control panel and in rare cases it is hidden. And using this panel you can select the same functions as with the remote control. It is provided in case the remote control is lost or broken, but for comfort it is better to order a new remote control.

Considering the LG air conditioner: instructions for the control panel

Remote controller remote control LG air conditioners are a liquid crystal display unit displaying air conditioner parameters.

It has this functionality:

• Air temperature display;
• The fan has 3 speeds and auto mode;
• The JetCool button turns on the fast cooling mode, and intense air flow is supplied for 30 minutes until the room temperature reaches the temperature you specify;
• The function of automatically moving the blinds can be turned on by pressing the AutoSwing button, after which automatic control begins, and this does not lead to a decrease in air humidity and a more comfortable distribution of air flow;
• In healthy dehydration mode, the air conditioner reduces air humidity and does not overcool it;
• The automatic restart function is necessary to resume work if the power supply unexpectedly disappears;
• The self-diagnosis function makes it possible to turn on the chaos mode, which causes the blinds to swing up and down, creating the effect of wind blowing;
• Ionization is only available in air conditioners with filters;
• Displays room temperature.

All these functions can be seen on the remote control included with your installation.
Production of Ballu air conditioner: instructions for the remote control

Not everyone can understand how an air conditioner of this brand works in one mode or another.

Turning on the air conditionerBalluheating happens like this:

• Press the ON/OFF button;
• After pressing, the temperature and mode selection indicator appears on the panel, press MODE, then select the heating mode, it is indicated by the sun;
• Use the + and – buttons to set the required temperature;
• By pressing the FAN button, select the fan rotation speed;
• Turn it off with the ON/OFF button.

If you read the instructions for the remote control, there is a section about controlling the panel itself. By controlling the panel, you can set the same functions as the remote control.

All air conditioner remote controls come with clear instructions and you won’t have any problems understanding them. If, after reading the instructions, you still do not understand some of the nuances, then you should contact service center.

Instructions: how to turn on the air conditioner for heating (video)

Air conditioners that operate in heating mode, even if there is severe frost, are still able to heat the room to the required temperature. This means that if we compare energy consumption with heat production, we will get a good result. And if we compare air conditioners with other heating devices, we will get up to 4 times the benefit on electricity needs.

Instructions for the following models:

A09AW1
A12AW1

Air conditioner LG A09AW1

Table of contents:
Disposal
Title of each part
Selecting operating modes
Cleaning your air conditioner
If not used for a long time

Precautionary measures

Disposal

Title of each part
External block.

Title of each part

External unit

Indoor unit

A unique feature of the indoor unit of this air conditioner is that the front panel of the indoor unit allows you to place images on it and change them.

Remote control

1 - Button to enable/disable operation.
2 - Select operating mode.
3 - Set the desired temperature.
4 - Select air flow power.
5 - Start the powerful heating/cooling mode (pressing will turn on one of the specified modes and fan at maximum).
6 - Button to control the position of the vertical damper.
7 - Turn on/off the timer.
8 - Setting the time (when programming the timer).
9 - Activate/disable the timer.
10 - Setting the “Sleep” mode.
11 - Turn on the “Ventilation” mode.
12 - Display of room temperature.
13 - Turn on/off the plasma filter.
14 - Selecting the horizontal direction of air movement.
15 - Reset parameters.
16 - Switching keyboard controls - to select the function indicated in blue.
17 - Starting the auto-cleaning function.
18 - Control the operation of the heater (if there is one).
19 - Adjusting the brightness of the display.

Preparation before starting work
Make sure that the device is connected to a separate outlet that is grounded. Install batteries into the remote control. Set the time. Check that foreign objects do not interfere with the air movement around the outdoor and indoor units.
After installing the batteries in the remote control, you need to set the current time. To do this, press the RESET button, then specify the time and press the ENABLE/DISABLE button. Then you need to press the 2F button and make sure that a similar inscription lights up on the screen. Next, click on the time setting button to set the current time. Then press the TIMER SET/CANCEL button.

Selecting operating modes
Press the power button on the remote control to turn on the air conditioner. Next, by pressing the operating mode selection button, you can select the currently required operating mode. By pressing it successively you will select the following modes (Cooling-Auto-select-Drying-Heating). By selecting desired mode you can set the required temperature. The choice for heating mode is possible in the range of 16-30, for cooling 18-30 degrees.
After which you can set the desired fan operating mode from several: CHAOS (creating the feeling of a light breeze) and four constant modes from weak to maximum power.
Working in dehumidification (dehydration) mode, it reduces the level of air humidity. The desired temperature level cannot be set as the device automatically selects it based on the current selection. In any case, the air conditioner works in such a way that by reducing humidity it minimally affects the temperature.
Unlike the Heating and Cooling modes, where the air conditioner only cools or heats, when selecting the Auto Select mode, you can specify the desired temperature range and when the temperature decreases, the air conditioner will turn on the Heating mode, and when the temperature rises, on the contrary, it will cool the air in the room.

Additional modes and settings
Fast heating/cooling mode. When the room temperature is too high or vice versa, it is recommended to first turn on the air conditioner at maximum power. After switching on, it runs for 30 minutes (for cooling and 60 minutes at maximum heat transfer and ventilation.
Automatic restart function - activates the air conditioner in the same mode in which it was operating before the emergency power outage.
For maximum air purification there is a Plasma filter. It can be started in any operating mode of the air conditioner by pressing the Plasma button on the remote control.
The “Self-cleaning” function starts the process of removing moisture from the internal cavities of the air conditioner; it is necessary after operating in cooling and drying modes.
The “Energy Saving” function allows you to switch the device to an economical operating mode, during which it operates more quietly and consumes less electricity.
Forced mode - if you do not have a remote control, you can turn on the air conditioner by pressing the button located on the indoor unit. By successively pressing it, you can turn on the cooling mode and turn off the air conditioner.
Start the timer. Check that the time set on the remote control is correct. Press the second function start button (2F) on the remote control and turn on the timer by pressing ON/OFF TIMER. Set the timer operation time using the time setting buttons. Do not forget that the entire time you control the air conditioner using the remote control, the window for receiving commands and the remote control must be within sight.
To disable the timer: check that the 2F button is not activated and press the TIMER CANCEL button. After which the timer image on the air conditioner and display should go out.

ADVIСE:
Do not overcool the room. This is harmful to health and unnecessarily increases energy consumption.
Close curtains or blinds if the air conditioning is running. Do not allow sunlight into the room with the air conditioner running.
Control the direction of the vertical damper so that the room temperature is evenly distributed.
Make sure windows and doors are tightly closed. Otherwise, cold air will leave the room.
Clean the air filter regularly. A clogged filter reduces air flow and increases energy consumption.
Do not forget to periodically ventilate the room. During operation of the air conditioner, the air is not renewed as during ventilation, so it is necessary to monitor this additionally.
To quickly cool the room at the beginning of work, use a mode with increased fan speed.

Cleaning your air conditioner
Choose a stable foundation on which to stand. Be sure to unplug the plug from the outlet before cleaning. Do not use water hotter than 40 degrees, gasoline, or abrasive detergents - this can damage the appearance of the plastic.
Behind the front panel there are air filters. They should be checked and cleaned if necessary once a week. To remove dirt, you can use a vacuum cleaner; in cases where it is difficult to remove, you can wash the filter in warm water with the addition of liquid detergent. After washing, the filters should be dried in the shade (not in the sun).
PLASMA filters must be checked at least once every three months. Cleaning can be done with a vacuum cleaner or washed with water. They also cannot be dried in the sun. Don't touch this filter the first 10 seconds after turning off the air conditioner.
Deodorizing filters must be removed, dried in the sun for 2 hours and put back in place.
Periodically inspect the external unit of the air conditioner and, if dirt appears, remove it, for which you can call an employee of the relevant company.
If you think there is a problem
The air conditioner doesn't work. Check whether it is connected to the power supply and whether the circuit breaker has blown. It is also possible that there is no power in the network or the voltage is too high (in the second case, the air conditioner protection will work)
The air conditioner does not cool properly. Check that there are no obstructions in the air path around the outdoor and indoor units. The air filter must be clean. When the temperature is too high, the air conditioner becomes less efficient. Also check that the windows and doors in the room are closed. The temperature may not be set correctly. There may be a heat source in the room.

ALWAYS contact the service center if:
There was a burning smell and loud noise during operation. Immediately turn off the device and unplug it from the outlet;
The power cord or plug is hot and is clearly damaged;
when starting self-diagnosis, a fault code appears;
water leaks from the indoor unit;
faults in the operation of the circuit breaker are detected.

If the air conditioner will not be used for a long time
At the end of the season, the air conditioner must be prepared to be turned off. For what:
clean the filters;
turn on the warm mode for 1-2 hours to completely dry indoor unit from the inside;
turn off the air conditioner using the remote control;
remove the batteries from the remote control;
disconnect the plug from the power supply.

Before turning on after a long period of inactivity.
Check that there are no obstacles to air movement around the external and internal units;
install batteries in the remote control;
set the time;
connect the plug to the network.
Installation location and electrical work
The installation of the air conditioner must be carried out by certified specialists. Make sure that there are no obstacles to air movement at the intended installation site, that the operating noise of the external unit will not disturb those living nearby, and that it is possible to remove condensate from the external unit.

Precautionary measures
Use a power plug and a grounded socket. Do not connect the air conditioner to a lower rated outlet. Do not use an extension cord - connect directly to the outlet. Do not use a damaged plug or power cord. The power cord and plug must be handled with dry hands.
Do not stand on your own or place heavy or hard objects on the power cord.
It is prohibited to disassemble, repair, or modify the device yourself. For any repair work you need to invite a specialist.
Make sure the mounting posts are intact and intact. The outdoor unit must be securely fixed to prevent it from falling.
Do not place objects on the outer or inner units, especially those with water (for example, a vase with water).
Do not insert your fingers or any other objects into the service openings of the air conditioner. The fan runs at high speed, which may cause injury.
If your air conditioner stops cooling or heating, this may indicate a refrigerant leak. In this case, it is necessary to call repair specialists.
Do not stand in the path of cold air, as this may harm your health.

Air conditioner LG A12AW1

Table of contents:
Disposal
Title of each part

Selecting operating modes

Cleaning your air conditioner
If you think there is a problem
If the air conditioner will not be used for a long time
Installation location and electrical work
Precautionary measures

Disposal
This product is made of complex materials that should not be disposed of as normal waste. Some of them can be reused. Find out how to properly dispose of such items in your area.
Title of each part
External block.

Title of each part

Indoor and outdoor units

1 - Decorative panel of the indoor unit.
2 - This product exhausts air on the side surfaces.
3 - Air is drawn into the heat exchanger from above.
4 - The external block has a fence on the rear and side surfaces.
5 - Air outlet after contact with the heat exchanger from the front.

Remote control

Preparation before starting work
Remember that this model plugs into a heavy-duty outlet and consumes more energy than a regular appliance. Therefore, it cannot be connected to extension cords or sockets of insufficient rating.
As with most remote controls, the requirements for batteries are the same - they must be of the same type, not rechargeable, and installed correctly.
Selecting operating modes
By turning on the device, which is already connected to the network, you can use the remote control to select the mode you are interested in.
If desired, you can fully automate the operation of the device by turning on auto mode. It is enough to specify the upper and lower temperature limits and you can forget about other actions. The device will automatically turn on cooling when the temperature rises and vice versa.
If you want to select a separate mode, this is easy to do - in the summer, the cooling mode is enough, in cold times, the heating mode is enough.
Separately, you can use the drying mode. In this case, the device operates in such a way as to reduce humidity, but not affect the temperature.
When selecting the ventilation mode, air ventilation in the room is simply maintained.

Additional modes and settings
The Neoplasm filter perfectly removes odors from the air, along with other substances. Therefore, the “fan” mode is excellent for cleaning indoor air.
Using a timer, you can set the time when the device turns on and off on its own.
The self-diagnosis mode is convenient because you can find out about the condition of the device without resorting to outside help.
To combat the appearance of mold and bacteria, there is a self-cleaning function. The device dries the cavities of the indoor unit on its own. This prevents microorganisms from multiplying.
For night work there is a “sleep” mode. Thanks to the inverter type of operation, the device is very quiet. And in this mode it is even quieter.
Useful tips
If you plan to cool the room, you need to be careful not to overdo it - too much cold will not be good for your health and you will waste a lot of energy.
Don’t forget to check the condition of the windows and doors - if cold air leaves the room, the work becomes much more difficult.
At the beginning of work, it is worth using an enhanced fan mode to cool the room faster.
We must not forget about ventilating the room. Oxygen starvation can harm your health.
Cleaning the air conditioner
All actions must be performed with the air conditioner disconnected from the network. Disconnecting the plug is done with dry hands.
All washed components should be dried in the shade.
Do not use solvent, gasoline, abrasives, or hot water, otherwise you will ruin the appearance of the plastic.
If you think there is a problem
If the device does not work, check - the timer may have turned it off. Or it's simply not connected to the network.
If your air conditioner is not cooling well, there are a number of things you need to check. It must be set to the correct mode and sufficient power. It is possible that the windows and doors in the room are open. If there are many people in the room or the heating device is running, the air conditioner will work worse.
The system that protects the device from frequent restarts will block the ability to turn on the air conditioner for 3 minutes immediately after turning it off.
If your air conditioner is producing fog (white smoke), remember that cold air when in contact with humid air causes condensation to form.
Also, it should be remembered that cold parts of the air conditioner will cause condensation to appear - therefore water may leak from the air conditioner.
When warming the home, the external unit cools down and may freeze. Therefore, the device must be stopped periodically to thaw ice, which could damage the device.
If there are any problems with the remote control, first of all check whether the batteries are in order, whether they are installed correctly, and whether the button on the remote control is jammed.
A cracking sound may well accompany the device during heating.
The sound of splashing or dripping may occur due to the movement of condensate or refrigerant.
If you notice an odor from the indoor unit, it may be time to clean it. Also, the smell may belong to a bloomed wall, wallpaper, or carpet.

When the air conditioner will be out of service for a long period of time
Turn on self-cleaning mode. Then turn off the device and do not forget to remove the plug from the socket and the batteries from the remote control.
Before turning it on after inactivity, you need to check that both units are not clogged with foreign objects. Connect the device to the network. Ground. Then install the proper batteries in the remote control and use the air conditioner.
Choosing an installation location
You should not install the air conditioner in places where there may be engine oil, flammable substances, or hydrogen sulfide in the air. The outdoor unit is noisy during operation and can disturb people. In addition, when choosing a place for the air conditioner, you need to consider where you will discharge the condensate.

Precautionary measures
Please note that the device must be connected to an outlet of sufficient power, otherwise there is a risk of fire or melting.
Extension cords must not be used.
Connect and disconnect the device with dry hands.
Never place heavy, hot or other objects on the power cord.
Do not place objects (especially water) on both units of the air conditioner.
Condensation may drip from the device - do not place furniture or other devices under it.
Do not overload the device - first turn it off using the remote control, and then remove the plug from the socket.
Never insert your fingers into the air conditioner - it is dangerous.
Avoid exposing yourself and others to prolonged, direct exposure to cold air.
A complete stoppage of heating and cooling may be due to a refrigerant leak.
A burning smell or strange sounds during operation should alert you - unplug the device. Call specialists to assess the situation.

This remote control is supplied to all LG air conditioners (wall-mounted split systems).

Wireless remote control for LG air conditioners and LCD display of the indoor unit displaying the operating parameters of the air conditioner:
Air temperature display from 18-30 C.
3 fan speeds + auto mode
Jet Cool- forced cooling mode - allows you to quickly cool the room by 5C in five minutes.
Fast cooling. An intense air flow at high speed is supplied for 30 minutes until the room temperature reaches 18*C.
AutoSwing- automatic movement of blinds. Automatic blind control mechanism for more comfortable air flow distribution.
Healthy Dehydration- in this mode, the air conditioner reduces the humidity in the room without overcooling it.
Automatic restart- saving all preset parameters in the event of an unauthorized power outage.
Self-diagnosis split systems, mode.
Chaos- a mode for swinging the blinds up and down, creating a blowing of the room like wind...
Ionization (Plasma)- works only for air conditioners with Plasma, Cyclotron plasma filters, etc.
Temperature display- measuring the air temperature inside the room (displayed on the remote control screen in the form of a house)
Other display parameters specified in the operating instructions...

Remote controls for air conditioners LG we don't sell

The release of the first refrigerator in 1958, which was named Gold Star, marked the beginning of the development of the Korean company LG. And today she continues to develop, becoming a supporter innovative technologies and having established the production of not only built-in household appliances, but also a line of “smart” devices that have access to global network. But such wired devices are not yet available to everyone, so LG also produces equipment for the mass consumer, affordable, but no less high quality.

We present a review of LGI climate control equipment, short description its types, operating conditions and features, main technical characteristics and advantages.

Classification of the model range

On the domestic market, LV company equipment, which is assembled in Korea, is presented in a fairly wide range; its high popularity is due to the fact that air conditioners of this type trademark recognized as the best in the middle price category, have excellent functionality, they are distinguished high quality assembly and uninterrupted operation throughout the entire period of use. A large selection of colors and design solutions allow you to choose an air conditioning system to suit any interior style of the room and make it a designer decoration of the room.

The model range of LZHI air conditioners is not limited to the choice of body colors and design style, but also to the variety of types of air conditioning and indoor air ventilation systems themselves. So, LG air conditioners are classified into:

• multi-zone VRF and VRV systems– climatic reversible complexes designed for installation in large rooms. Air-flow devices operate simultaneously for cooling and heating air, are characterized by a high level of energy saving, ease of installation and management, high energy efficiency, environmental friendliness, low level noise. The external unit of such air conditioners has a wall and window installation type;
• semi-industrial Split systems are high-performance equipment that ensures the most accurate compliance with the specified air parameters in long rooms, therefore they are suitable for permanent and temporary use in office premises, retail spaces, cafes, and restaurants. They are presented in two variations: standard and inverter air conditioners, which are equally characterized by reliability, compactness and environmental friendliness. The presence of an inverter allows you to set up air conditioning in automatic or semi-automatic mode, reduce the noise level and energy consumption from the use of such devices;
• multi-split systems are universal duct air conditioners that are mounted on the wall. But the main difference between multi-split systems and traditional air conditioners is that they have several indoor units and one outdoor unit, the power of which is enough to generate heat, cool and ventilate air in different rooms and under different operating conditions;

• homemade split system for maintenance optimal temperature indoors and at the same time purifying the air in it. The LG household split system has an air ionizer, an antibacterial filter, an auto-cleaning function, and air flow control, which together provides heating of the apartment and a comfortable microclimate in the house 24 hours a day. Indoor models are divided into floor, wall and ceiling air conditioners for domestic use. Moreover, mobile floor air conditioners are monoblock and consume less electricity;
• industrial refrigeration machines, column or precision cassette-type air conditioners for arranging a heating circuit are energy-efficient models that have high performance and are capable of solving the problems of creating optimal temperature conditions, microclimate and air ionization in buildings for various purposes. Therefore, installing an lg air conditioner of this type, accordingly, is in demand at industrial enterprises. Their internal units are cassette type with a ceiling or window mounting system;
• air conditioners-paintings with a replaceable front plasma panel of a flat indoor unit, the unique design and small size of which allows the device to be used as an interior detail. May have a mirror panel.

A common feature of all types of LG air conditioning systems is that they use only environmentally friendly and human-safe freon and technologies that reduce the noise level from operating devices.

The selection of an air conditioner model depends on its type, technical capabilities, functionality, appearance and the area of ​​the room in which it will be installed.

Features of LG air conditioners

Air conditioning and ventilation systems of this brand are technologically sophisticated, have a stylish design, a thin and flat indoor unit, high performance and a long service life. They operate silently and purify the air of dust, allergens and microorganisms. And the presence of an inverter allows you to improve the control of the air conditioner and more accurately maintain the set temperature.

Other features of LG air conditioners include:

• a fan with a larger diameter and inclined blades, which reduces air resistance;
• durable mounting plate;
• fan drive on a neodymium magnet, which produces and amplifies torque and increases the power of the unit;
• an air ionizer, the operating principle of which allows you to clean the air in the room as much as possible;
• auto cleaning function. After finishing work in the cooling mode, droplets of condensate are removed from the tubes and cover by rotating the fan;
• the presence of a MULTI “Plasma” filter to effectively combat dust, viruses, bacteria and allergens;
• protection against electrical surges;
• forced cooling mode, which allows you to make the air in the entire room cool in a short time;
• timer and night mode function.

All modern models of LG air conditioners have these functions, which makes them attractive and in demand among different users.

For clarity, let’s compare the technical characteristics and functionality of the three most popular models of LG air conditioners.

Model, serial number	lg 7	lg 09	lg 12
Room area	20 m2	25 m2	35 m2
Compressor type	inverter	inverter	inverter
Power consumption (heating/cooling)	860/740 kW	900/840 kW	1.24/1.37 kW
Cold performance	2.3 kW	2.58 kW	3.66 kW
Heat performance	2.5 kW	2.73 kW	3.87 kW
Indoor unit noise level	39 dB	28 dB	41 dB
Filters	anti-allergenic, anti-viral		anti-allergenic, anti-virus, triple filter, Plasma filter
Removing moisture	1.1 l/h	1.2 l/h	1.5 l/h
Winter set	There is	There is	There is

Based on these data, you can select a suitable air conditioner that meets all requirements. Get acquainted with technical characteristics and operating modes can be found in the operating manual that comes with each air conditioner.

Instructions for the control panel and LG air conditioners

The remote control for the LG air conditioner comes complete with all models and runs on batteries. Its buttons simplify the control of the device and allow you to customize the main operating modes to suit the user's needs. How to use the remote control is described in the instructions for lg air conditioners.

It also contains information about the device series, a copy of the quality certificate, passport, warranty, connection diagrams and addresses of the nearest services, so that the buyer knows about the places of maintenance and repair of air conditioners. In addition, the instructions describe how to connect the device, how to start the engine, check whether the inverter or display is working, how quickly the air conditioner cools and heats, how quickly the impeller turns to distribute hot air, etc.