How to make a light signal on an iPhone. How to enable and configure flash flashing when there is an incoming call on iPhone

Apple pays a lot of attention to the functionality of its devices, but few people know how to turn on flash when making a call on iPhone. The company introduced this feature with people with disabilities, particularly hearing impairment, in mind. Thanks to the light signal, a person will miss fewer calls. When the smartphone is in a pocket, vibration will transmit a call message, and when placed on a surface, a light alert will most likely reach the user.

Flash on call

How to turn on flash for ringing iPhone 7 - the method is very simple and does not require additional tools or tricky settings. Thanks to the procedure, you can turn the flash, which is activated only when the camera is on, into an excellent light source. Thanks to bright lighting, it is possible to illuminate the area and provide sufficient visibility for people.

The developers have built in the ability to set blinking when calling in silent mode. The function is not automatically active, but can be turned on at the user's request. This feature is useful when the smartphone is lying on a soft cloth and does not create audible or perceptible vibrations. The technology is based on LED flash.

Turning on the flash on the iPhone during a call is a useful feature not only for people with hearing aid problems; even a completely healthy person may like the opportunity. The smartphone does not create sound disturbances in a quiet room, for example, when all household members are already asleep, but the message remains noticeable. When you make a call, a flashing flash appears, which is visually noticeable even during daylight hours, but in the dark it will be difficult to ignore.

To stand out from the crowd and in silent mode, you can install the flash without much difficulty. The function is available to everyone whose device supports the operating system iOS system 7 and above. It was in this platform that the flashlight function was introduced, and accordingly it became possible to control the flash not only for taking photographs, but also for lighting, notifications, etc.

To add vibration to the flash, just follow a simple procedure:

1. Select the “Settings” item, you can find it on the device’s desktop.
2. You need to go to the “Basic” category, where most of the basic parameters are present.

1. Activate the transition to the “Universal Access” item.

1. Among all sections there is a column “Hearing”, where the element “Flash warnings” is located. You need to click on the element once to activate it, then the slider will move to the right and turn green.

1. You can exit Settings and check the result.

After these manipulations, the function will be activated and will be used to constantly stay in touch. The only drawback to this technique is that for better visibility of the light you need to place the smartphone on the table with the screen down, this can lead to scratches and other damage. Even in the back-down position, the indicator light remains slightly visible.

Other flash options

We figured out how to turn on the flash when making a call on iPhone 6 and other models with iOS 7 and higher, but the function of the LED is not limited to this. The most useful feature is the flashlight. It allows you to see dark corners of the room or illuminate the road on the street to avoid injury. To activate the mode, just go to the “Control Center” section, which can be expanded by swiping from the bottom edge up. In the curtain that drops out, you can find the corresponding icon and the inscription “On. flashlight".

The flash in flashlight mode will work continuously, and if you need to cancel the actions performed, you can repeat the described manipulations. The developers have also built in another option to deactivate the Flashlight mode. To deactivate the flashlight, you can unlock the screen and long-press the camera button. After the procedure, the screen jumps a little and the function is turned off.

Using the LED in camera mode as a constant light allows you to take a picture of higher quality and as expected.

By activating the flash during a call, you can significantly reduce the likelihood of missing a call, even if you have poor hearing or the smartphone is far away. You can notice the effect of the backlight even in the next room if the lighting level in the premises is insufficient.

LED flash first appeared on the iPhone 4, before that in previous models it was not available - those who wished could purchase the flash accessory separately. This device was called iFlash. Now every Apple user has the opportunity, without buying foreign objects, to set a flashing indicator when making a call. How to turn on the flash when making a call on an iPhone? Read our instructions.

Functions of enabled LED flashing

Today, all models of smart phones are equipped with a flash, which is located on the back panel of the gadget. Its main task is to create sufficient lighting for video and photography, but that’s not all. useful features flashes. One of them is a call alert. This is exactly what we will talk about below.
As you already understand, an LED flash is not only a faithful assistant for creating excellent photos, but also a notification of an incoming call. By turning it on on your phone this function, you will not only hear the melody of the incoming call, but also recognize it by the blinking flashlight. Surely this one useful opportunity will be useful for people with poor hearing - even without hearing the bell, a person can easily understand by the flickering of the flash that someone is calling him.

How and where to put the flash when making a call on iPhone 4, 5/5s, 6 or 7

So, the procedure for turning on the flash is as follows:

1. Launch the “Settings” application, select the “General” section in it.

2. Then – “Universal Access”.

3. After that, press LED flash for alerts.

That's all, now you can see how the flash blinks when your iPhone calls. It also reacts to an incoming message and goes off when the alarm is activated. Note that the flash flickers only when the phone is in lock mode. IN normal condition(but not while sleeping!) there will be no warning light. In this case, indication of a missed SMS is possible only if you set up a “reminder” of an unread message.

Attention: The flash during a call will become an additional consumer of your phone's energy. Therefore, by activating this function, do not be surprised that your iPhone will begin to discharge faster.

Content

Apple produces powerful and convenient smartphones with a wide range of functions. One of the capabilities of iPhones is a visual notification of an incoming message or call in the form of a flashing flash. This is a very convenient feature that not all users of Apple gadgets are familiar with. Thanks to it, you will not miss the right call or SMS.

How to make iPhone blink when calling

If you turn on the flashlight on your iPhone during a call, the LED light will begin to blink repeatedly - this is very convenient if the silent mode is set. This feature is a nice addition to the vibration that is common on any smartphone.

For the first time, LED flash was used on 4th generation smartphones.

You can make a kind of strobe or repeatedly flashing flashlight from your iPhone like this:

• On your desktop, go to the settings menu, where select “General”. (Figure 1)

• Find and select "Accessibility". Scroll to the Hearing option. (Figure 2)

• To turn on the flasher on your iPhone, go to the Flash Alerts section. Then all that remains is to switch the warning slider of the LED device to the on position. (Figure 3)

After the manipulations, the turned on indicator light of the gadget will flicker three times to indicate new incoming calls, SMS and various notifications. The display function is useful for people with hearing difficulties. It will ideally complement sound and vibration indication.

Flash on iPhone call for silent mode

Alternatively, you can set the blinking for silent (quiet) mode. This is very important when you are on the street, on vacation in a noisy place - where the sound signal is unlikely to be heard. The flickering LED light in silent mode will prevent important calls and messages from being missed. Enabling the mode is done as follows:

• Open “Settings” from the main iPhone screen and go to the main settings section. (Fig. 4)

• Go to "Universal Access". In the window that opens, scroll down to the “Hearing” item. (Fig. 5)

• Tap Alert Flash and turn it from silent to on. (Fig. 6)

• Don't forget to check the functionality of the iPhone's LED lamp - the switched on light indicator should blink several times when there is an incoming call or notification.

How to turn off flash when making calls on iPhone

Not everyone likes the fact that the iPhone starts blinking during an incoming call.

Some people sooner or later get tired of blinking; for example, it can interfere with sleep at night.

Disabling it is as easy as turning it on. To prevent the flash from disturbing you when making a call on your iPhone, follow these steps:

• Go to the “Settings” section of your device.
• Select "General" and click on "Accessibility". (Fig. 7)

• In the window that opens, scroll through the list of settings until you find the “LED flash for warning” item. (Fig. 8)

• Move the slider to off. You can check the absence of the backlight effect the first time you receive a call.

Your iOS smartphone can notify you of an incoming call or SMS not only with a melody and vibration, but also with a flickering flash. This feature was originally developed for hearing-impaired users, but it can be useful for everyone. We'll tell you how to turn on the flash on your iPhone during a call - in normal mode or silent mode, for which versions of iOS this is possible.

Before installing, check whether your smartphone has the technical ability to do this. The flashlight and photo illumination appeared only in iPhone 4; for earlier models it was possible to purchase additional ones external device. In older models, including the popular iPhone 5s, SE and iPhone 6, 7, photography backlight is built in from the start.

In the iOS 10 menu, the flash during a call is turned on in a special subsection. How to make a flash when making a call on iPhone:

• Launch basic settings.
• Go to "Universal Access".
• Scroll to the Hearing group.
• Click on the line “Flash warnings”.

A subsection of additional flash options on iPhone will open. If you want to set a flashing signal during a call, turn on the slider on the first line. In this case, the smartphone will also blink when it receives an SMS, an alarm goes off, an event occurs from the calendar or reminders - but only when the display is locked. If the phone is not locked, the flashlight does not blink.

If you want the flash to flash exclusively in silent mode, activate the second line. Then, when you make a call on your iPhone, you will feel vibration and see flickering - in a dark room, such illumination will help you answer the call faster without hearing the ringtone. You can move both sliders, then the flash on the iPhone will appear with the sound on and off during a call.

How to enable in iOS 9

In previous versions of the OS, you can also activate the backlight. The sequence of actions on how to turn on the flash during a call on an iPhone on iOS 9 is only slightly different:

• Open main settings.
• Go to “Universal Access” and scroll to the “Hearing” group.
• Turn on the "Flash warning" line.

Additional parameters not here, you won’t be able to connect blinking only in silent mode. To expand the settings menu, update to iOS 10 if you are not the owner of an iPhone 4 or 4S - these phones are no longer on the list of those supported by the latest OS.

How to turn off

Like on the iPhone, we figured it out. Disabling the function will not take much time - open the “Hearing” block again and set the slider opposite “Flash warnings” to inactive. Its color will change from green to gray, you managed to turn off the flash.

Activate flashlight

Another option for using photography lighting is flashlight mode. At the same time, the phone starts to light constantly, and not blink, until you turn off the function. To turn on the flashlight: Open the bottom control panel by swiping up from the edge of the screen. Click on the button with the image of a flashlight.

How to turn off the glow: in the control panel, click on the flashlight again. On a locked display, you can turn off the light in another way: press the “Home” button and briefly tap on the camera icon in the right corner. The image on the screen will jump and the flashlight will turn off.

Conclusion

We figured out the capabilities of light notifications in the iPhone. Now you can easily set blinking to your call at any time iOS versions, turn it off or activate the flashlight.