MegaFon Login SP-AI software update. MegaFon Login (SP-A1): well, very budget Android Firmware megafon login sp ai instructions
Most owners of ultra-fashionable smartphones, tablets or smartphones Megafon model V9 on the Android 2.3 operating system with a capacitive touch screen 16.7 million colors - 600x1024 dpi believe that it is impossible to independently change the firmware in these gadgets, but they are deeply mistaken.
The reasons why you need to flash a tablet or Megafon smartphone model V9 on the Android 2.3 operating system with a capacitive touch screen 16.7 million colors - 600x1024 dpi are very diverse: when the device completely refuses to turn on, if it spontaneously starts to reboot, you need to restore the software after unsuccessful installation or just wanted to install the latest firmware version.
Firmware Flashing of smartphones Megafon Login, optima, sp a1 and other models.
- You can do the firmware yourself on all phones, tablets, smartphones Megafon model V9 on the Android 2.3 operating system with a capacitive touch screen 16.7 million colors - 600x1024 dpi.In addition to the topic of firmware on Android smartphones, there is a review article: . It describes in detail, there is a video instruction on how to reflash a mobile device to Android kit kat.
In what cases should you update the firmware of smartphones, tablets, Megafon smartphone model V9 on the Android 2.3 operating system with a capacitive touch screen 16.7 million colors - 600x1024 dpi and for other models:
If the phone does not turn on, although the reason may not be in the firmware;
If the phone constantly glitches and reboots;
If the firmware is unsuccessful and the phone needs to be returned to its original state;
If you need to install the latest, most modern firmware version;
Download firmwares, programs, flashers and Megafon firmware.
Download free firmware for your Megafon phone from your computer.
- the official website of the manufacturer of cell phones Megafon, for the following models optima, sp a1, 4G Turbo and others. By clicking on the link, you can enter the name and model code into the search and download software and firmware, for example for Megafon optima, sp a1, 4G Turbo, where you can also download RU, RP, software and driver for free on your mobile device.The search for software, first of all, should always be carried out on the official website of the electronics manufacturer; there are always the most current and latest firmwares for the Megafon 4G Turbo phone with a capacitive IPS dpi screen and other models with other characteristics.
Megafon firmware instructions.
How to properly flash a smartphone. Instructions for firmware using the example of a Megafon sp a1, 4G Turbo phone.
On your smartphone, go to Settings->Developer options and enable USB debugging.
We connect the USB cable from the phone to the computer and install the firmware.
Disconnect the phone from the computer, turn it off and remove the battery.
We launch the SP Flash Tool program on the computer, it is needed to upload new firmware to the phone.
In the program window, click the Scatter-loading button and in the window that opens, select the file MT6589_Android_scatter_emmc.txt (you can find it in the folder with other files of the new firmware). After opening, the program will contain all the paths to the files necessary for the update.
Be sure to uncheck the first item - PRELOADER (otherwise the phone will not boot).
Now click the Download button. We answer “Yes” to any pop-up messages.
We connect the smartphone (using a USB cable) to the computer, the new firmware will begin to be uploaded to our device automatically.
When the process is complete, a window with a green circle will appear. You can disconnect your phone from your PC and turn it on.
For more information on how to do this, see the video instructions:
To search for firmware on the Internet, you need to know the model of your phone that you will be flashing. You can quickly find out your phone model and firmware version by typing the code in your phone *#0000# .
Instructions for flashing Megafon sp a1, 4G Turbo
Another example. Instructions for flashing firmware for Megafon sp a1, 4G Turbo mobile phone.
Firmware for Megafon sp a1, 4G Turbo: download firmware for
Firmware Megafon sp a1, 4G Turbo
1. To update the firmware on Megafon sp a1, 4G Turbo, you need to download the firmware from the link above, the Smart Phone Flash Tool loader and USB firmware.
2. Turn on the phone, connect the USB cable and install the firmware.
3. After installing the firmware, turn off the device.
4. Run the loader program "Flash tool.exe".
5. Click “Download Agent” and select the “MTK AllnOne DA.bin” file (in the downloader folder).
6. Click “Scatter-loading” and select the file “MT6573 Android scatter.txt” (in the folder with the firmware).
7. Uncheck “PRELOADER”, click on “Download” and connect the USB cable.
8. After downloading the firmware, the bootloader will show the software installation status.
Note: When you connect your phone, the program should see it and start flashing the firmware. If the phone is not detected, then disconnect it from the computer, remove and insert the battery and reconnect it to the computer
Instructions for flashing Megafon from the mobile version of the site.
And another example of firmware for the Megafon sp a1, 4G Turbo smartphone. Other phone models are flashed similarly. The main thing is to find the right firmware for your phone model. You can find them on the Internet via Yandex. I can also recommend a good site with firmware
So, we take the Megafon sp a1, 4G Turbo firmware as an example.
The first thing you need to do is download the firmware itself. It is presented as an archive in zip format. There is no need to unpack it, since you can reset it to an external storage medium, that is, an SD card.
The next thing to do is turn off the phone and fully charge its battery. After the battery is fully charged, you need to remove the charger and take out the battery, and after about 30-40 seconds put it back into the phone.
Next, press the power button and hold it for 1-2 seconds, while simultaneously pressing the key that decreases the volume. These two buttons must be held until the manufacturer's logo appears on the phone screen - Megafon sp a1, 4G Turbo. After this, you need to release the on/off key, but you must hold down the volume down until the Android logo appears. After it appears, you need to release the volume button and press up once, that is, increase the volume. We use the same button when moving through menu items, and select the required option with the power key. Select the menu item “apply update from external storage”, then select the archive that was saved to the external storage medium.
This completes the firmware for Megafon sp a1, 4G Turbo. As you can see, there is nothing difficult in the process of installing an operating system on a phone and you can actually do it yourself, without resorting to the paid services of service centers or self-taught “handicraftsmen”.
But it should be noted that in case of incorrect actions when flashing the phone, it can be irrevocably damaged, turned into a “brick” - a useless and good-for-nothing piece of plastic and iron. Therefore, if you are not confident in your abilities, then it is better to entrust the flashing of a mobile phone or tablet to experienced programmers from an electronics repair service.
It is best to download firmware for modern Megafon models from the official website of the phone manufacturer; this can be done by clicking on the link: download
To download proprietary software, use the link: official website firmwares. Here is a description of how to find a driver for your phone.
From the link above in the text you can download for free and read a description of how you can make firmware for the Android phone Megafon sp a1, 4G Turbo and other models. This page contains a video review and instructions on how you can reflash your smartphone yourself; here you can download the firmware for your phone for free through the official website.
How to independently flash Android on a Megafon sp a1 phone model on the Android 4.0 OS platform on a screen with a resolution of 320x480, TFT capacitive type 262.1 thousand (18 bits), program on a computer Instructions for flashing, download and change the firmware on a Megafon sp a1 phone, 4G Turbo, V9, Login, optima for free through the official website.
Popular reviews on Megafon
| Cuts launch quickly on the phone and do not take up much space in the phone's memory. | |
| You can learn more about how to Download Megafon music for free here; to do this, follow the link above. | |
 | Here you can find the latest and most current drivers for Megafon mobile phones and tablets. This link contains the correct, correct programs and the latest versions of drivers for Megafon mobile devices. |
| Where to download and how to install the application for free - Traffic Rules with questions and answers and explanations on Megafon | |
Remember - you do all actions at your own peril and risk!
WE ARE NOT RESPONSIBLE FOR CRUGGED HANDS!!!
How to unlock your MegaFon phone login sp-a1 for free from your operator
1. To unlock from an operator, ONLY a computer with Windows XP/Windows 7 32 bit installed is suitable for us
3. In the C:\login\ folder, run vcredist_x86.exe and install Microsoft Visual C++
4. In the folder C:\login\ run Name
5. A window will appear in which you need to enter the IMEI of your megafon sp-a1 phone (imei is written under the battery - or dial *#06#)
6. Press - ENTER
7. Turn off the phone, remove the battery for 5 seconds, connect the phone to the computer with a USB cable and insert the battery back.
8. An unknown device (with an exclamation mark) will appear in the device manager - install the driver for it from the C:\login\drv folder
9. If the installation was successful, a new COM port will appear in the Device Manager - look and remember its value.
10. Disconnect the phone from the computer and remove the battery.
11. Launch: C\login\flashtool\FlashTool.exe
12. Go to the menu item as shown in the photo (there is only one)
13. In diag1, select the COM port number of our phone, which we remembered above.
14. Click - OK, click on the button on the left, ?? , - the program will write, -Ready-, ,
15. Again, connect the phone to the computer and then insert the battery into it - the firmware will be installed into the phone - Port1 lights up green.
16. Upon completion of the MegaFon ligin SP-A1 firmware, remove the battery and close the firmware program. We turn on the phone.
17. Sometimes the phone asks you to enter the unlock code - enter 191519373892 (if asked)
18. Install the latest official firmware from the Megafon website, according to these instructions
19. With the SP-AI phone turned off, press the volume up button (VOL+) and then power up- hold down until the device turns on in the Recovery menu
20. Using the sound buttons, move to the Wipe data\factory reset item and activate it with the power button. Move to Yes - delete all user data
Use the power button to select it. After the operation is completed, select - Reboot system now
21. That’s all - this is how you can unlock megafon ligin sp-a1.
ICQ - 609843478
MAIL(agent) - [email protected]
Yandex- [email protected]
QIP- [email protected]
Yahoo - Razlo4ka
It seems that Russian cellular operators have finally turned their attention to the fact that it is more profitable to sell service than hardware. Yes, this is a common practice in the United States when, when concluding a contract for cellular communication services, the subscriber receives a phone for an essentially symbolic price.
The Big Three launched almost identical Android smartphones priced below $100, manufactured in China. This MTS 960(2990 rub.), Beeline E600(2990 rub.) and MegaFon Login(2560 rub.)
I have the last one in my hands - MegaFon Login on Android 4.0.4.
In addition to the phone itself, for these 2,560 rubles, the subscriber receives three months of work on the Internet at the “Internet XS” tariff. That is, in fact, the phone itself will cost 1990 rubles. Without a contract, the price of the smartphone is 2990 rubles.
The characteristics of the device are as follows:
- Support GSM, 3G, GPRS, EDGE, Bluetooth, Wi-Fi, GPS, A-GPS, GLONASS
- Processor Broadcom BCM21654, 1 GHz
- RAM 512 MB
- Internal memory 4 GB
- Video accelerator VideoCore IV HW
- Capacitive screen 320×480, 3.5", multi-touch for 2 touches
- Li-ion battery, 1300 mAh
- Camera 3 megapixels, with flash
- Supports microSD cards up to 32 GB
- FM radio with RDS
- MicroUSB and 3.5 mm headphone connectors
- Dimensions 63 × 115.8 × 13 mm, weight 118 g.
I was wondering what needed to be done with the gadget to make it 4 times cheaper without changing the characteristics, and does it make sense to buy it at that price? Looking ahead, I will say that I liked this toy. Login is definitely worth the price, and Android helps a lot with that.
The configuration of a smartphone is traditionally simple and predictable. This is a rechargeable battery and a USB cord with a charger. In addition to them, the miniature box contained a manual and a wired headset (does anyone print them out at all?).
The charger produces 0.5 A, which seems to be not much these days. The battery is also small - 1300 mAh. However, the current consumption in this smartphone is low - the battery is enough for a couple of days of active use.
In numbers, this is about 9 hours of talk time, 8 hours of watching movies or 125 hours of standby time.
MegaFon Login looks like a modern, quite stylish smartphone. The size was chosen very well - it fits into a shirt pocket, and does not get in the way or break in jeans. Feels comfortable in the hand (back panel with SoftTouch coating). For example, the Nokia Asha 200 (pictured) has a similar size.
I must say that I got the phone a week ago, and all week I used it mercilessly in physically extreme modes. I was not able to damage it in any way - it was assembled very reliably, and itself is quite durable.
I have only one complaint about the assembly. (it was similar for SP-W1, by the way): The microUSB connector is not protected in any way. And I'm pretty sure I could put the wire in there the wrong way and break something there.
Apart from the microUSB, there is nothing else on the left side of the phone. On the top there is a headphone jack and an on/off button. On the right is a volume rocker, on the bottom is a microphone and a hardware “Home” button. It’s not really needed, but it’s more convenient to turn on the smartphone screen than the button on the top edge.
On the back of the device there is a camera (3 megapixels) with LED flash. The camera does not have autofocus, which significantly affects the quality of the pictures. It can record quite decent video at 640×480 resolution. The flash can be used as a flashlight, and this is its best use.
It is quite possible to photograph text with such a camera; it will be legible in the photograph.
The external speaker of the phone is normal, the melodies play loud enough. The sound in headphones is better if you get normal headphones, of course.
The MegaFon Login screen is definitely not the strongest point. The manufacturer saved money on this. Not too high brightness, small viewing angles, low sensitivity and accuracy. You need to get used to it (in a week I learned to type text almost without missing a beat), and for those who are annoyed by such things, this smartphone is contraindicated.
Partially, the problem with typing is solved by installing alternative on-screen keyboards and display calibration.
The strength of a smartphone is geolocation. There is also a very fast GPS, A-GPS, and even GLONASS, which is generally a rarity for devices in this price range. And it all works.
When connected to the car's on-board network, MegaFon Login turns into a navigator. All popular navigation systems and maps can be installed on it without any problems and work perfectly. As far as I understand, in the pre-installed Navigation program, MegaFon does not even charge money for traffic.
Like SP-W1, Login only works with MegaFon SIM cards. You can also buy “untethered”, but it’s a little more expensive and made to order (you’ll have to wait).
It keeps a good connection, both in Wi-Fi networks, and in 3G, and in areas with poor coverage.
According to the manual, the 3G module operates in the HSDPA 7.2 Mbit/s download format, HSUPA 5.76 Mbit/s upload. The possibility of such speeds depends on the number of base stations nearby. I was unable to record a download speed of more than 4 Mbps - the smartphone works with 3G at the same speed as the first generation iPad. I think in large cities the speed should be higher.
You can choose which network to use - 2G or 3G. There are functions of a Bluetooth modem and a Wi-Fi router, which significantly expands the possibilities of using the device.
The software of the smartphone has not undergone any special changes - in addition to the Android 4.0.4 ICS OS itself, a set of programs from Mail.ru, “Navigator” and “Replace the beep” from MegaFon, as well as a certain sports application “Championat.com” were found in the smartphone.
Almost all the programs that I tried to run on this smartphone worked without any problems. The exceptions are Skype and Chrome - official applications from the Play Market do not work, you need to install other versions (available on the Internet). Only Instagram does not work at all - a patch has not yet been released.
The games work, all kinds of racing simulators and shooting games (Dead Trigger, for example) work flawlessly, not to mention all kinds of Angry Birds.
No obvious glitches or freezes were noticed - the device works quickly, clearly and predictably. In my opinion, this is what saves the smartphone - it runs Android and the vast majority of applications from the Play Market completely honestly.
And behind some of the complexity of Android from the point of view of beginners, there are its broad capabilities. Completely banal tasks like “download a movie to your phone and watch it” or “take a photo and send it by e-mail” are solved on such a device extremely simply and in a matter of seconds.
I think children will also be delighted with such phones (games, applications, appearance), and parents’ wallet will suffer less if the child loses or breaks the phone.
Instructions for updating the MegaFon Login phone software (model SP-AI) from the phone's internal memory.
Before starting the update, make sure your phone battery is fully charged and in good working order.
System updates may delete personal data from your device's memory. It is recommended that you back up your personal data before upgrading your system.
We connect the turned on MegaFon Login phone to the computer using a data cable
On your phone, click “Enable USB storage” and confirm the action by clicking “OK”.
Download the official firmware update for Megafon Login - link.
Save the file to your phone, renaming the file to “Update.zip”
After saving the file, turn off the phone.
Press and hold the Volume Up key and the Power key at the same time for about 10 seconds. After the standard screensaver and vibration signal appear, the phone will boot into recovery mode.
Use the volume keys to select apply update from external storage.
Confirm your selection by briefly pressing the Power key. A file manager will open with the contents of the memory card.
Use the volume buttons to select a file update.zip.
Confirm your selection by briefly pressing the Power key. During the update process, the message will appear Install /sdcard, then - diagnostic messages.
Attention: do not turn off the phone or remove the battery until the message appears Install from sdcard complete. The software update process usually takes about a minute.
Select an item wipe data/factory reset volume keys
When a new menu appears, select the item Yes – delete all user data. Confirm your selection by briefly pressing the Power key.
The process of formatting and clearing the internal memory will begin, after which the recovery menu will open again.
Use the volume keys to select the item reboot system now. Confirm your selection by briefly pressing the Power key.
After rebooting, the phone is ready to use.
