Without Wi-Fi technology, the life of most modern people is unthinkable. First of all, it is very convenient: you can use the Internet both at home and at a train station or airport, in various institutions and enterprises. Therefore, it is extremely important to understand how this technology works and be able to use it correctly.

What is a virtual router?

A device that forwards information packets between segments (computers) within a network. It is routers that allow us to use wireless Internet: computers or other devices that we connect to any network are united by the router into one network, allowing them to simultaneously use the Internet.

A virtual router is a technology that allows you to create a virtual device based on just one network card that performs all the same functions as a real one. At the same time, the device itself does not physically exist: one might say, our computer becomes a router. There is no need to fuss with wires and setup.

Any computer with Windows 7 installed provides this opportunity.
There are two possible ways to do this:

• Use technology implemented at the kernel level and configure the connection via the command line;
• Use additional software that takes care of the setup task and provides a convenient interface;

Having figured out why we need this, we will consider both options in detail.

What are virtual routers for?

Surely you've had to share Wi-Fi from your phone more than once? For phones with the iOS operating system, just enable “modem mode” in the settings, enter the network name and password - you’re done! Your phone at this moment becomes a full-fledged Wi-Fi distribution point. Each time you use this function on your phone, you actually create a virtual router, uniting the users connected to you into a single network. The only difference is that it's a little more difficult to do on Windows.

So, the main reasons for use:

• The need to “distribute” Wi-Fi to another person as quickly as possible;
• Saving money by not having to purchase a router;
• Lack of an electrical outlet nearby to connect the router;

Installation and configuration

Method 1. We use the technology built into Windows 7.

We need the command line. To call it, press the key combination Win+R:

Run "Run" using win+R

Enter “cmd” in the window that opens and click OK

Run window in Windows 7

A command prompt window will open. Type netsh command and press Enter.
Then we write the following line:

wlan set hostednetwork mode=allow ssid=»name» key=»password» keyUsage=persistent

Here name is the name of the future network, password is the password, respectively. Keep in mind that the password must consist of more than just numbers or letters

Press Enter, if everything went well, we see the following:

Don't close the command line! We will still need it.

The network adapter (virtual Wi-Fi) has been created, however, let's check. Go to the Control Panel, go to the Network and Sharing Center, and then go to the “Change adapter settings” section

Among the list of networks we should see the following:

As you can see, our connection has been created, but does not work. Open a command line window and write:

wlan start hostednetwork

After which we see a notification that everything is running:

Go to the “Network and Sharing Center”. Now our point works:

Ready! At this stage, the creation of a virtual Wi-Fi router is completed.

Method 2. Using specialized programs.

To configure a virtual Wi-Fi point without resorting to the command line and to be able to manage our network, you can use special programs.

What is the significant difference between this method and the first? It's a matter of functionality. Let's say you wanted to change your network name or password without running to the command line and without wasting time entering some commands there. Or, for example, you want to monitor which computers are connecting to you and, if desired, block them. These capabilities are provided by software such as Connectify.

You can download this program either from the official website or from any other source. Installation is also as simple as possible and will not cause any problems.

There are only a few obvious fields in the main program window: Name, Password and Internet to Share. We set the last parameter to automatic, since the program itself will select the desired connection for distribution.

Click the Start Hotspot button and you're done! In the Clients tab we see a list of devices connected to us, which we can easily block:

Results

We got acquainted with what virtual routers are and what they are used for, and looked at the main ways to organize them on your computer. Which method to use is up to you. In any case, the technology of creating virtual routers is a skill that is extremely useful for any user. In addition, by studying this topic more seriously, you can learn many more interesting things for yourself.

Peculiarities

• creating and launching a virtual access point;
• convenient installer;
• the ability to restart and adjust adapter parameters;
• sharing and network management;
• view available network connections;
• View the system name and status of each connected device.

Pros and cons

• compactness;
• low consumption of computer resources;
• turning off the PC or sending it into hibernation mode after disconnecting devices;
• no need to launch special services.

• periodic difficulties with determining the IP addresses of connected users.

Connectify. A program that distributes Wi-Fi from a laptop. In it, in a few steps you can create your own virtual access point. It has the function of displaying statistics about the use of the connection, makes it possible to view data about connected devices, as well as received and transmitted information.

mHotspot. An application that can turn your computer into a router and distribute Wi-Fi from it. It has flexible settings for the access point, displays information about connected users, and keeps statistics of spent traffic.

How to use the program

To get started, launch the program and go to the settings section.

Then set up a name for the router and set a password.

Settings

Go to the “Control Panel” section, “Network and Sharing Center”, “Change adapter settings” function. A new network should appear here with "No Connection" written on it:

Control Panel

Click the “Start” button in the program interface and launch the access point, after which Wi-Fi distribution will begin.

In order to allow other devices to connect to your network, go to the connection settings and check the boxes shown in the figure:

Allow connection

After this, all connected devices will be displayed in the panel:

Connected devices

In the Switch Virtual Router program, you can create your own virtual access point without a router, and also distribute WiFi via a laptop to other users.

To distribute Wi-Fi, just download Virtual Router Plus in Russian and install it as an Internet distributor. Download and try the stable version of this program.

Do you only have a cable connection to the Internet, but still want to use a smartphone or tablet in addition? Now this problem can be easily solved. By installing a small utility called Virtual Router Plus on your laptop, you can create a full-fledged Wi-Fi access point, which is no different from that provided by a regular router.

Virtual Router Plus download in Russian

All you need to do in order to enjoy wireless Internet without any problems is to install the above-mentioned application on your laptop and, immediately after launch, perform simple settings. Namely, in the appropriate fields, indicate your login and password for subsequent connection to the newly created access point.

Thus, having Virtual Router Plus among the list of installed programs on your device, you can provide yourself and your friends with high-quality wireless Internet at any time. And most importantly, you will get all these privileges absolutely free, since the utility is freely distributed and does not have a paid license.

If Virtual Router Plus is not suitable for your purposes, then you can go to the "" section of our website and select other, more suitable applications there, for example -.

A virtual router plus will allow you to distribute the Internet using an access point on a computer or laptop. Use the free, latest version of the program in Russian to distribute Wi-Fi.

Png" data-category="Programs for WiFi distribution" data-promo="https://ubar-pro4.ru/promo/bnr/download3..html" target="_blank">Download Virtual Router Plus

Standard installer				For free!
check		Official distribution Download Virtual Router Plus		check
close		Silent installation without dialog boxes		check
close		Recommendations for installing the necessary programs		check
close		Batch installation of multiple programs		check

In order to distribute the Internet via Wi-Fi, you need a router - a special device. But in most cases, especially at home, you can not even buy it, but turn any computer into a router. All you need for this is a computer with a built-in or external Wi-Fi adapter and a small program called Virtual Router Plus - a free virtual router.

Thanks to a virtual router, you can distribute wi-fi to all devices in the immediate area - computers, laptops, tablets, smartphones, anything that can receive a signal.

Virtual Router Plus – free virtual router

Virtual Router Plus is a free virtual router in Russian. Thanks to it, any computer with a Wi-Fi adapter can distribute the Internet to other devices that can receive a Wi-Fi signal.

Virtual Router Plus is lightweight, easy to use, has a clear interface, stability, and does not load the system. This is one of the simplest and most intuitive programs for creating a wi-fi point on a computer.

Virtual Router Plus Interface

When you run this program, a window will open in front of you. You need to fill in the following information:

• Network name (SSID). Write down what your wi-fi network will be called. I do not recommend using Cyrillic.
• Password. Create a password to prevent your neighbors from stealing your Internet.
• General connection. Select from the list the Internet connection that you want to distribute through this virtual router. If the required connection is not in the list, then click the “Update” button next to it.

When all the data is filled in, click on the “Launch virtual router plus” button. When Wi-Fi starts to work, you will see a message in the system tray. After this, you can try to connect to the Internet using a variety of devices.

The free virtual router Virtual Router Plus can distribute any Internet connection, regardless of its method: through a network card from an ADSL modem, USB ADSL modem, USB 3G/4G modem, fiber optic technology and others.

Virtual router manager is designed to help if you do not have a real wi-fi router, but you need to distribute one. Its main task is to simulate a wi-fi router, so you can forget about any wires and inconveniences. The program is reliable and licensed, there are no viruses in it, and you can download virtual router manager completely free of charge. The program is compatible with the Microsoft Windows XP, Seven and higher operating systems.

What devices is the program compatible with?

The key condition for the correct operation of the program is the presence of wi-fi on the distributing and receiving devices. Receiving devices can be: iPhone, iPod Touch, netbooks, laptops, audio devices, wireless multifunction devices, smartphones, Android phones or Zune and others. The distribution device (usually a computer) on which the program is installed must have a wi-fi adapter.

Where can I download Virtual Router?

You can download virtual router manager on the official website or on torrents. Please note that the file must only have the extension ".exe" or ".msi". Anyone can set up the program, even without reading the instructions. Using the program is even easier than installing it.

How to get started with virtual router manager?

To distribute wifi on Windows you will need to perform the simplest manipulations:

• indicate the correct name of your network;
• enter password;
• Click on the “Start” button.

Entering a password is necessary for the security of the transmitted data, so that another person cannot unauthorizedly connect to your virtual distribution. All devices that you connect via virtual wifi will be displayed in the program window. If necessary, you can even find out the IP and MAC addresses of each device by looking at them in the program window.

Working with the program

At its core, the Russian version of the virtual router manager is a shell, that is, it is capable of performing all the settings for you. To gain access via wifi, just launch the program and then minimize it to tray. With these actions, every time you turn on the computer, it will automatically start.

Setting up the program

The setting comes down to filling or selecting in 4 lines:

• to create a wifi network, you need to come up with any name for it in the top field;
• in the next field we come up with a password consisting of at least 8 characters;
• in the “Shared Connection” drop-down menu, select the connection through which the computer connects to the Internet;
• In the bottom drop-down menu, select the desired connection type.

Press the central button “Start Virtual Router” - the settings are completed. In the same settings window you will see “Peers Connected”, where all connected portable devices will be displayed to which wifi will be distributed.

How to choose the right connection type?

In order to competently create a network, you need to select the desired type of connection - this is important! There are two modes: access point or ad hoc.

• Ad hoc. This mode provides a point-to-point connection. Translated into simple language, only one device can be connected to a virtual router.
• access point. This mode will allow you to connect a large number of receiving devices to the “access point” (wi-fi distributing device). Possible problems and their solutions

Possible problems and their solutions